Application of a cohesive zone element for the prediction of damage in nano/micro coating

Many tools in production technology are nowadays coated to obtain a satisfactory lifetime and degradation resistance. Therefore, the main goal of this study is to investigate antiadhesive and wear resistant coatings made of ceramics, plastics and metals produced by High Power Pulsed Magnetron Sputtering (HPPMS) technique [1]. A cohesive zone element technique (CZ) is applied to model the interactions of the coatings and the substrate surfaces (see [2]). This goes along with the investigations of the delamination and failure behavior of the involved surfaces. To illustrate the applicability of the model, several structural simulations are performed. The developed CZ element model is capable of modeling the separation, the contact and also the irreversible reloading conditions in both normal and tangential directions [3]. The model is further developed to be applicable for different structures including different bonding behaviors, with a higher stability. The talk concludes with a detailed discussion of the numerical results of different material and interface properties. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Factors affecting the morphology of benzoyl peroxide microsponges

Benzoyl peroxide (BPO) is primarily used in the treatment of mild to moderate acne. However, its application is associated with skin irritation. It has been shown that encapsulation and controlled release of BPO could reduce the side effect while also reducing percutaneous absorption when administered to the skin. The aim of the present investigation was to design and formulate an appropriate encapsulated form of BPO, using microsponge technology, and explore the parameters affecting the morphology and other characteristics of the resultant products employing scanning electron microscopy (SEM). Benzoyl peroxide particles were prepared using an emulsion solvent diffusion method by adding an organic internal phase containing benzoyl peroxide, ethyl cellulose and dichloromethane into a stirred aqueous phase containing polyvinyl alcohol (PVA). Different concentrations of BPO microsponges were incorporated in lotion formulations and the drug release from these formulations were studied. The SEM micrographs of the BPO microsponges enabled measurement of their size and showed that they were spherical and porous. Results showed that the morphology and particle size of microsponges were affected by drug:polymer ratio, stirring rate and the amount of emulsifier used. The results obtained also showed that an increase in the ratio of drug:polymer resulted in a reduction in the release rate of BPO from the microsponges. The release data showed that the highest and the lowest release rates were obtained from lotions containing plain BPO particles and BPO microsponges with the drug:polymer ratio of 13:1, respectively. The kinetics of release study showed that the release data followed Peppas model and the main mechanism of drug release from BPO microsponges was diffusion.     

A highly sensitive spectrophotometric determination of ultra trace amounts of azide ion in water and biological samples after preconcentration using dispersive liquid-liquid microextraction technique

A simple and highly sensitive method developed for preconcentration and spectrophotometric determination of ultra trace amounts of azide ion (N ₃ ^? ) in water and biological samples using dispersive liquid-liquid microextraction (DLLME) technique. The method is based on ion association formation of azide ion with malachite green and extraction of the ion pairing product using DLLME technique. Some important parameters, such as reaction conditions and the kind and volume of extraction solvent and disperser solvent were studied and optimized. The calibration curve was linear in the range of 0.5–50 μg/L of azide ion. Also, the enrichment factor and extraction recovery obtained were 24.7 and 98.7%, respectively. The method was applied to the determination of azide ion in water and biological samples.     

Ultrasonic accelerated efficient synthesis of aminobenzochromenes using Ag2Cr2O7 nanoparticles as a reusable heterogeneous catalyst

Ag₂Cr₂O₇ nanoparticles were found to be an exceedingly effective catalyst for the mild and green synthesis of aminobenzochromenes. The reaction was performed under ultrasonic irradiation as an innocuous tool and in water as a green solvent at room temperature. This method encompasses several sustainable and economic benefits.     

A new liquid-phase microextraction method based on solidification of floating organic drop

In the present study, a new and versatile liquid-phase microextraction method is described. This method requires very simple and cheap apparatus and also a small amount of organic solvent. Eight microliters of 1-undecanol was delivered to the surface of solution containing analytes and solution was stirred for a desired time. Then sample vial was cooled by inserting it into an ice bath for 5 min. The solidified 1-undecanol was transferred into a suitable vial and immediately melted; then, 2 μL of it was injected into a gas chromatograph for analysis.Some polycyclic aromatic hydrocarbons (PAHs) were used as model compounds for developing and evaluating of the method performance. Analysis was carried out by gas chromatography/flame ionization detection (GC/FID).Several factors influencing the microextraction efficiency, such as the nature and volume of organic solvent, the temperature and volume of sample solution, stirring rate and extraction time were investigated and optimized. The applicability of the technique was evaluated by determination of trace amounts of PAHs in environmental samples. Under the optimized conditions, the detection limits (LOD) of the method were in the range of 0.07-1.67 μg L⁻¹ and relative standard deviations (R.S.D.) for 10 μg L⁻¹ PAHs were <7%. A good linearity (r² > 0.995) in a calibration range of 0.25-300.00 μg L⁻¹ was obtained. After 30 min extraction duration, enrichment factors were in the range of 594-1940. Finally, the proposed method was applied to the determination of trace amounts of PAHs in several real water samples, and satisfactory results were resulted. Since very simple devices were used, this new technique is affordable, efficient, and convenient for extraction and determination of low concentrations of PAHs in water samples.     

A New Distributional Approach to Signature Change

Colombeau's generalized functions are used to adapt the distributional approach to singular hypersurfaces in general relativity with signature change. Equations governing the dynamics of a singular hypersurface are derived and a specific non-vanishing form for the energy-momentum tensor of the singular hypersurface is obtained. It is shown that matching in the case of de Sitter space in the Lorentzian sector is possible along the boundary with minimum radius but leads to the vanishing of the energy-momentum tensor of the singular hypersurface.     

Terpolymerization of Triisopropylsilyl Acrylate,Methyl Methacrylate,and Butyl Acrylate: Reactivity Ratio Estimation

Ternary monomer reactivity ratios of triisopropylsilyl acrylate (SiA), methyl methacrylate (MMA), and n‐butyl acrylate (BA), as common monomers in self‐polishing coatings (SPCs) binders are obtained using experimental data collected from free radical bulk polymerization at 70 °C. Different terpolymerizations at low and medium‐high conversions are performed at optimized feed compositions. Estimations are made using the error‐in‐variables model (EVM) framework, applying the recast form of the Alfrey–Goldfinger (AG) model and a direct numerical integration (DNI) approach to the collected data. Estimations from individual low and medium‐high conversion data are compared to those found with the combined data (full conversion range data). The highest certainty in point estimates are obtained with analysis of the full conversion range data. Furthermore, the reactivity ratios determined from the combined data fall between those found with analysis of individual low and medium‐high conversion data, another corroboration of reliable data collection. Reactivity ratios determined from analysis of the combined data (r_SiA/MMA = 0.4185, r_MMA/SiA = 1.3754, r_SiA/BA = 0.8739, r_BA/SiA = 0.5736, r_BA/MMA = 0.3692, r_MMA/BA = 1.7919) are used in the recast AG model to predict cumulative terpolymer composition as a function of conversion. The experimental data and model prediction show satisfactory agreement.     

Synthesis and characterization of PEGylated iron and graphene oxide magnetic composite for curcumin delivery

Nowadays, nanostructures have been given significant attention in medical and biological fields. Among these nanostructures, graphene oxide (GO) has been widely used in drug delivery systems, because of its unique properties, and the ability to connect to other nanostructures such as magnetic nanoparticles (NPs) as well as polymers by its functional groups. In this research, first, GO was prepared by exfoliating graphite according to the modified Hummer’s method, and then the Fe₃O₄ NPs were synthesized by a simple co-precipitation method on GO nanosheets. In the next step, with the help of the ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide coupling reagents, the polyethylene glycol (PEG) polymer was bonded to the GO-Fe₃O₄ nanocomposite. Finally, anti-cancer drug, curcumin (Cur) was loaded onto the nanocomposite and the Cur loading ratio was measured at about 8%. The samples were evaluated using Fourier transform-infrared, differential scanning calorimtery, vibrating-sample magnetometry, atomic force microscopy and dynamic light scattering techniques. The results show that the prepared nanocomposite is an appropriate candidate for biomedical applications.     

Effect of the Solvent Polarity on the Optical Properties in the (OC)5Cr=(OEt)(Ph) Complex: A Quantum Chemical Study

Russian Journal of Physical Chemistry A - In this study, using the B3LYP* method, quantum chemical computations were applied for analyzing the effects of solvent on the electronic spectrum features...