On the difference in material structure and fatigue properties of nylon specimens produced by injection molding and selective laser sintering

This paper describes the influence of dynamic tension/compression loading on notched and unnotched nylon specimens fabricated by Injection Molding (IM) and Selective Laser Sintering (SLS). The main objective of this work is to analyze and describe the differences in material structure and fatigue properties of as-built nylon parts produced by IM and SLM from the same polyamide 12 powder. The differences in dimensional quality, density, surface roughness, crystal structure and crystallinity are systematically measured and linked to the mechanical fatigue properties. The fatigue properties of the unnotched SLS specimens are found to be equal to those of the unnotched IM specimens. The presence of pores in the sintered samples does not lead to rapid failure, and the microvoid coalescence failure mechanism is delayed. The notched specimens show more brittle failure and increased fatigue resistance which is caused by local notch-strengthening. The results enable improved understanding of the difference in material structure and fatigue behavior of selective laser sintered and injection molded polyamide.     

Synthesis of Neu5Ac α-(2→ 8)Neu5Ac α-(2→ 3)Galβ1→ Och2Ch2Ch3, A Determinant Epitope of Gd3 Ganglioside

ABSTRACT

Synthesis of the terminal trisaccharide sequence of the ganglioside GD₃, α-D-Neup5Ac-(2→8)-α-D-Neup5Ac-(2→3)-β-D-Galp-(1→4)-β-D-Glcp-(1→1)-Cer (2) was achieved by employing an α-(2→8) disialyl glycosyl donor (1). Condensation of 1 with the glycosyl acceptor 6, propyl 4,6-O-benzylidene-β-D-galactopyranoside, gave the desired protected trisaccharide 10 (14%) as well as the elimination and hydrolysis products of 6, compounds 8 and 9 respectively. O-Deacetylation and debenzylation of 10 gave the final trisaccharide 11, as its propyl glycoside.     

Templating Irreversible Covalent Macrocyclization by Using Anions

Inorganic anions were used as templates in the reaction between a diamine and an activated diacid to form macrocyclic amides. The reaction conditions were found to perform the macrocyclization sufficiently slow to observe a template effect. A number of analytical methods were used to clarify the reaction mechanisms and to show that the structure of the intermediate plays a decisive role in determining the product distribution. For the macrocyclization under kinetic control, it was shown that the amount of a template, the conformational rigidity of building blocks, and the anion affinities of reaction components and intermediates are important parameters that one should take into consideration to achieve high yields.     

The surface charge of regenerated cellulose fibres

In this paper the influence of charged species on the sheet strength of viscose fibres was investigated. Four samples of chemical modified viscose fibres, as well as a reference fibre were studied. The swelling of these viscose fibres and the breaking length of hand sheets have been determined. Comparing the results, the influence of both, swelling and surface charge on the bonding force, is evident. The allocation of the charges, induced by cationic starch and Carboxmethylcellulose, has been analyzed by Titration, attenuated total reflection spectroscopy (ATR) and X-ray photoelectron spectroscopy (XPS). Titration was used to make a first estimation of the charge distribution within the fibre. Using ATR and XPS, more detailed information about the surface charge has been achieved. All measurement methods showed a significant amount of charge on the fibre surface.     

Interactions between CdTe quantum dots and DNA revealed by capillary electrophoresis with laser‐induced fluorescence detection

Quantum dots (QDs) are one of the most promising nanomaterials, due to their size‐dependent characteristics as well as easily controllable size during the synthesis process. They are promising label material and their interaction with biomolecules is of great interest for science. In this study, CdTe QDs were synthesized under optimal conditions for 2 nm size. Characterization and verification of QDs synthesis procedure were done by fluorimetric method and with CE. Afterwards, QDs interaction with chicken genomic DNA and 500 bpDNA fragment was observed employing CE‐LIF and gel electrophoresis. Performed interaction relies on possible matching between size of QDs and major groove of the DNA, which is approximately 2.1 nm.     

Theranostic Approach for the Protein Corona of Polysaccharide Nanoparticles

Polysaccharide nanoparticles are promising materials in the wide range of disciplines such as medicine, nutrition, food production, agriculture, material science and others. They excel not only in their non‐toxicity and biodegradability but also in their easy preparation. As well as inorganic particles, a protein corona (PC) around polysaccharide nanoparticles is formed in biofluids. Moreover, it has been considered that the overall response of the organism to nanoparticles presence depends on the PC. This review summarises scientific publications about the structural chemistry of polysaccharide nanoparticles and their impact on theranostic applications. Three strategies of implementation of the PC in theranostics have been discussed: I) Utilisation of the PC in therapy; II) How the composition of the PC is analysed for specific disease markers; III) How the formed PC can interact with the immune system and enhances the immunomodulation or immunoelimination. Thus, the findings from this review can contribute to improve the design of drug delivery systems. However, it is still necessary to elucidate the mechanisms of nano‐bio interactions and discover new connections in nanoscale research.     

Microstructure and physico-chemical transformation of some common woods from Cameroon during drying

Journal of Thermal Analysis and Calorimetry - The influence of drying on the microstructure, physical and chemical properties of some tropical wood species has been investigated using...     

Restraint of the Differentiation of Mesenchymal Stem Cells by a Nonfouling Zwitterionic Hydrogel

The success of human mesenchymal stem cell (hMSC) therapies is largely dependent on the ability to maintain the multipotency of cells and control their differentiation. External biochemical and biophysical cues can readily trigger hMSCs to spontaneously differentiate, thus resulting in a rapid decrease in the multipotent cell population and compromising their regenerative capacity. Herein, we demonstrate that nonfouling hydrogels composed of pure poly(carboxybetaine) (PCB) enable hMSCs to retain their stem‐cell phenotype and multipotency, independent of differentiation‐promoting media, cytoskeletal‐manipulation agents, and the stiffness of the hydrogel matrix. Moreover, encapsulated hMSCs can be specifically induced to differentiate down osteogenic or adipogenic pathways by controlling the content of fouling moieties in the PCB hydrogel. This study examines the critical role of nonspecific interactions in stem‐cell differentiation and highlights the importance of materials chemistry in maintaining stem‐cell multipotency and controlling differentiation.