Controlled migration of antifog additives from LLDPE compatibilized with LLDPE grafted maleic anhydride

This paper summarizes a study of controlled migration of an antifog (AF) additive; sorbitan monooleate (SMO), from linear low density polyethylene (LLDPE) films containing a compatibilizer, LLDPE grafted maleic anhydride (LLDPE‐g‐MA). LLDPE/LLDPE‐g‐MA/SMO blends were prepared by melt compounding. Bulk and surface properties of compression molded LLDPE films containing SMO and LLDPE‐g‐MA were characterized using Fourier transform infrared spectroscopy and contact angle measurements. Thermal properties were investigated using a thermal gravimetric analyzer. Diffusion coefficient (D) was calculated, and AF properties were characterized using a “hot fog” test. Compression molded films were characterized for their morphology using high‐resolution scanning electron microscopy, and rheological properties were measured using a parallel‐plate rotational rheometer. It was found that the LLDPE/LLDPE‐g‐MA/SMO systems are characterized by a slower SMO migration rate, a lower diffusion coefficient, and lower contact angle values compared with LLDPE/SMO blends. These results are well correlated with results of a hot fog test. Morphological studies revealed a very fine dispersion of SMO in the LLDPE films, when 3 phr LLDPE‐g‐MA was combined with 1 phr SMO. Thermal analysis results show that the incorporation of 3 phr LLDPE‐g‐MA and 1 phr SMO significantly increases the decomposition temperature of the blend at T > 400°C. At high shear rates, the LLDPE blends show that the AF and the compatibilizer have a lubrication effect on LLDPE. Copyright © 2014 John Wiley & Sons, Ltd.     

Toehold‐initiated Rolling Circle Amplification for Visualizing Individual MicroRNAs In Situ in Single Cells

The ability to quantitate and visualize microRNAs (miRNAs) in situ in single cells would greatly facilitate the elucidation of miRNA‐mediated regulatory circuits and their disease associations. A toehold‐initiated strand‐displacement process was used to initiate rolling circle amplification of specific miRNAs, an approach that achieves both stringent recognition and in situ amplification of the target miRNA. This assay, termed toehold‐initiated rolling circle amplification (TIRCA), can be utilized to identify miRNAs at physiological temperature with high specificity and to visualize individual miRNAs in situ in single cells within 3 h. TIRCA is a competitive candidate technique for in situ miRNA imaging and may help us to understand the role of miRNAs in cellular processes and human diseases in more detail.     

Synthesis of Chiral Exocyclic Amines by Asymmetric Hydrogenation of Aromatic Quinolin‐3‐amines

Asymmetric hydrogenation of aromatic quinolin‐3‐amines was successfully developed with up to 94 % enantiomeric excess (ee). Introduction of the phthaloyl moiety to the amino group is crucial to eliminate the inhibition effect caused by the substrate and product, to activate the aromatic ring, and to improve the diastereoselectivity. This new methodology provides direct and facile access to chiral exocyclic amines. Notably, this report is the first on the highly enantioselective hydrogenation of aromatic amines.     

Facile Mechanochemical Synthesis of Nano SnO2/Graphene Composite from Coarse Metallic Sn and Graphite Oxide: An Outstanding Anode Material for Lithium‐Ion Batteries

A facile method for the large‐scale synthesis of SnO₂ nanocrystal/graphene composites by using coarse metallic Sn particles and cheap graphite oxide (GO) as raw materials is demonstrated. This method uses simple ball milling to realize a mechanochemical reaction between Sn particles and GO. After the reaction, the initial coarse Sn particles with sizes of 3–30 μm are converted to SnO₂ nanocrystals (approximately 4 nm) while GO is reduced to graphene. Composite with different grinding times (1 h 20 min, 2 h 20 min or 8 h 20 min, abbreviated to 1, 2 or 8 h below) and raw material ratios (Sn:GO, 1:2, 1:1, 2:1, w/w) are investigated by X‐ray diffraction, X‐ray photoelectron spectroscopy, field‐emission scanning electron microscopy and transmission electron microscopy. The as‐prepared SnO₂/graphene composite with a grinding time of 8 h and raw material ratio of 1:1 forms micrometer‐sized architected chips composed of composite sheets, and demonstrates a high tap density of 1.53 g cm^?3. By using such composites as anode material for LIBs, a high specific capacity of 891 mA h g^?1 is achieved even after 50 cycles at 100 mA g^?1.     

Synthesis of Rhenabenzenes from the Reactions of Rhenacyclobutadienes with Ethoxyethyne

Treatment of Na[Re(CO)₅] with RC?CCO₂Et (R=phenyl, naphthalen‐1‐yl, phenanthren‐9‐yl and pyren‐1‐yl) followed by reaction with acetyl chloride and ethanol afforded the rhenacyclobutadienes Re{‐C(R)?C(CO₂Et)C(OEt)?}(CO)₄. Reactions of these rhenacyclobutadienes with HC?COEt produced rhenabenzenes Re{‐C(R)?C(CO₂Et)C(OEt)?CHC(OEt)?}(CO)₄. Except for R=Ph, new rhenacyclobutadienes with pendant alkenyl substituents Re{‐C(R)?C(C(OEt)?CH(CO₂Et))C(OEt)?}(CO)₄ were also isolated from these reactions. The NMR spectroscopic and X‐ray structural data, as well as the aromatic stabilization energy (ASE) values suggest that the rhenabenzenes are aromatic, with extensive delocalized π character.     

Enhanced Anticancer Efficacy by ATP‐Mediated Liposomal Drug Delivery

A liposome‐based co‐delivery system composed of a fusogenic liposome encapsulating ATP‐responsive elements with chemotherapeutics and a liposome containing ATP was developed for ATP‐mediated drug release triggered by liposomal fusion. The fusogenic liposome had a protein–DNA complex core containing an ATP‐responsive DNA scaffold with doxorubicin (DOX) and could release DOX through a conformational change from the duplex to the aptamer/ATP complex in the presence of ATP. A cell‐penetrating peptide‐modified fusogenic liposomal membrane was coated on the core, which had an acid‐triggered fusogenic potential with the ATP‐loaded liposomes or endosomes/lysosomes. Directly delivering extrinsic liposomal ATP promoted the drug release from the fusogenic liposome in the acidic intracellular compartments upon a pH‐sensitive membrane fusion and anticancer efficacy was enhanced both in vitro and in vivo.     

Gold‐Catalyzed 1,2‐Acyloxy Migration/Intramolecular [3+2] 1,3‐Dipolar Cycloaddtion Cascade Reaction: An Efficient Strategy for Syntheses of Medium‐Sized‐Ring Ethers and Amines

A highly efficient strategy for the formation of medium‐sized‐ring ethers and amines based on a gold‐catalyzed cascade reaction, involving enynyl ester isomerization and intramolecular [3+2] cyclization, has been developed. Various multisubstituted medium‐sized‐ring unsaturated ethers and amines were obtained through this transformation. This method represents one of the relatively few transition metal catalyzed intramolecular cycloaddition reactions for medium‐sized ring synthesis.     

Synthesis of Polyketide Stereoarrays Enabled by a Traceless Oxonia‐Cope Rearrangement

Polyketide antibiotics bearing skipped polyols represent a synthetic challenge. A SiCl₄‐promoted oxonia‐Cope rearrangement of syn,syn‐2‐vinyl‐1,3‐diols was developed to forge an array of 1,5‐pentenediols, thus providing versatile motifs for the preparation of 1,2,3,5‐stereoarrays in a highly stereoselective manner. Further exploration with Sn(OTf)₂ realized the rearrangement of a cross‐aldehyde which tactically warrants the utility of the current approach to access complex polyketides. The origin of high stereoselectivity is attributed to a chairlike anti‐conformation of the oxonium ion intermediate.     

吸附树脂分离纯化枇杷花总黄酮的研究

比较了D-101、D-160、AB-8、NKA-9和聚酰胺等5种吸附树脂对枇杷花总黄酮的吸附及解吸附性能。在静态吸附和动态吸附实验基础上,筛选出效果较好的AB-8树脂进行动态吸附参数的研究。考察了样品液pH值、样品液浓度、洗脱液浓度、上样速度、洗脱速度等对AB-8树脂吸附和解吸效果的影响,确定了AB-8树脂动态吸附枇杷花总黄酮的最佳条件。获得的最佳纯化条件如下,样品液pH值为5.5,样品液浓度为12mg/mL,洗脱液为30%的乙醇水溶液,上样速度为2BV/h,洗脱速度为1BV/h。纯化后样品总黄酮含量达86.7%,比纯化前总黄酮含量高5~6倍。实验结果表明,AB-8树脂可用于分离纯化枇杷花总黄酮。