π-二苯铬(0)苯溶液的氧化反应

本文报道在苯溶液中,于中性条件下,过氧化氢与π-二苯铬(0)反应,可得到熔点为71℃的红色针状结晶。以差示扫描量热法测定其熔点、混合熔点和熔融热,还经元素分析、红外光谱、质谱及~1H核磁共振谱等鉴定,证明该结晶是由二克分子苯酚和一克分子苯醌形成的分子缔合物。π-二苯铬(0)苯溶液与过氧化氢反应的历程是:π-二苯铬(0)被氧化生成高价铬离子.此离子又使苯氧化成苯酚和苯醌,进一步形成酚醌分子缔合物。     

混合配体、希土三元配合物的研究 Ⅳ.3,5二硝基水扬酸(H2DNSA)、邻菲咯啉(phen)、希土(RE)三元固体配合物的合成及性质

本文报道了十种希土元素与3,5-二硝基水扬酸、邻菲咯啉三元配合物的制备方法。通过元素和化学分析测定了化合物的化学组成,并用红外光谱、紫外光谱、差热分析、磁化率、X射线粉天衍射等对所合成的化合物进行了结构和性质的研究。     

A Novel Asymmetric Synthesis of （-）-cis-1, 3-Dibenzylhexahydrofuro[3, 4-d]imidazole-2,4-dione

(-)-cis-1, 3-Dibenzyl-hexahydrofuro[3, 4-d]imidazole-2, 4-dione was prepared by a new synthesis method from meso dicarboxylic acid and dehydroabietylamine by asymmetric reduction in good yield with up to 91.6% e.e. value.     

The mechanism of proton transfer between adjacent sites exposed to water

The surface of a protein, or a membrane, is spotted with a multitude of proton-binding sites, some of which are only a few angstroms apart. When a proton is released from one site, it propagates through the water by a random walk under the bias of the local electrostatic potential determined by the distribution of the charges on the protein. Some of the released protons disperse into the bulk, but during the first few nanoseconds, the released protons can be trapped by encounter with nearby acceptor sites. This process resembles a scenario which corresponds with the time-dependent Debye-Smoluchowski equation. In the present study, we investigated the mechanism of proton transfer between sites that are only a few angstroms apart, using as a model the proton exchange between sites on a small molecule, fluorescein, having two, spectrally distinguishable, proton-binding sites. The first site is the oxyanion on the chromophore ring structure. The second site is the carboxylate moiety on the benzene ring of the molecule. Through our experiments, we were able to reconstruct the state of protonation at each site and the velocity of proton transfer between them. The fluorescein was protonated by a few nanosecond long proton pulse under specific conditions that ensured that the dye molecules would be protonated only by a single proton. The dynamics of the protonation of the chromophore were measured under varying initial conditions (temperature, ionic strength, and different solvents (H(2)O or D(2)O)), and the velocity of the proton transfer between the two sites was extracted from the overall global analysis of the signals. The dynamics of the proton transfer between the two proton-binding sites of the fluorescein indicated that the efficiency of the site-to-site proton transfer is very sensitive to the presence of the screening electrolyte and has a very high kinetic isotope effect (KIE = 55). These two parameters clearly distinguish the mechanism from proton diffusion in bulk water. The activation energy of the reaction (E(a) = 11 kcal mol(-1)) is also significantly higher than the activation energy for proton dissociation in bulk water (E(a) approximately 2.5 kcal mol(-1)). These observations are discussed with respect to the effect of the solute on the water molecules located within the solvation layer.     

Synthesis and applications of poly(acryl<Emphasis Type="Italic">p</Emphasis>-aminobenzenesulfonamideamidine-<Emphasis Type="Italic">p</Emphasis>-aminobenzenesulfonylamide) chelating fiber for pre-concentrating and separating trace Bi(III), Hg(III), Au(III) and Pd(IV) from solution samples

Poly(acrylp-aminobenzenesulfonamideamidine-p-aminobenzenesulfonylamide) chelating fiber containing "S", "N", and "O" elements was synthesized from polyacrylonitrile fiber and p-aminobenzene sulfonamide and used to enrich and separate trace Bi(III), Hg(III), Au(III), and Pd(IV) ions from wastewater and ore sample solution. The enrichment acidity, flow rate, elution conditions, reuse, interference ions, saturated adsorption capacity, constant of adsorption rate, analytical accuracy, and actual samples on chelating fiber were investigated by means of inductively coupled plasma optical emission spectrometry (ICP-OES) with satisfactory results. Solutions of 100 ng mL^–1 of Bi(III), Hg(III), Au(III), and Pd(IV) ions can be enriched quantitatively by this chelating fiber at a rate of 1.0 mL min^–1 at pH 4 and desorbed quantitatively with 20 mL of 0.25 M HCl and 2% CS(NH₂)₂ solution at 50 °C (with recovery 97%). When the chelating fiber was reused for 20 times, the recoveries of the analyzed ions enriched by the fiber were still over 95% (except for Hg(III)). One thousand-fold excesses of Mn²⁺, Ca²⁺, Zn²⁺, Mg²⁺, Fe³⁺, Cu²⁺, Ni²⁺, Al³⁺, and Ba²⁺ ions and thousands-fold excesses of Na⁺ and K⁺ cause little interference in the pre-concentration and determination of the analyzed ions. The saturated adsorption capacity of Bi(III), Hg(III), Au(III), and Pd(IV) was 4.850×10^–4, 3.235×10^–4, 2.807×10^–4, and 3.386×10^–4 mol g^–1, respectively. The constants of adsorption rate were 0.409 min^–1 for Bi, 0.122 min^–1 for Hg, 0.039 min^–1 for Au, and 0.080 min^–1 for Pd. The relative standard deviations (RSDs) for the enrichment and determination of 10 ng mL^–1 Bi(III), Hg(III), Au(III), and Pd(IV) were lower than 2.3%. The results obtained for these ions in actual samples by this method were basically in agreement with the given values with average errors of less than 1.0%. FT-IR spectra shows that the existence of –SO₂–Ar, –H₂N–Ar, O=C–NH–, HN=C–NH–, and –HN–SO₂ functional groups are verified in the chelating fiber. From the FT-IR spectroscopy, we can see that Hg(III), Au(III), and Pd(IV) are mainly combined with nitrogen and sulfur (or oxygen), and Bi(III) is mainly combined with nitrogen (or oxygen) of the groups to form a chelating complex.     

Preparation and characterization of sodium carboxymethylcellulose/poly(N-isopropylacrylamide)/clay semi-IPN nanocomposite hydrogels

A new kind of pH-/temperature-responsive semi-interpenetrating polymer network hydrogels based on linear sodium carboxymethylcellulose (CMC) and poly(N-isopropylacrylamide) (PNIPA) cross-linked by inorganic clay (CMC/PNIPA/Clay hydrogel) was prepared. The temperature- and pH-responsive behaviors, the mechanical properties of these hydrogels were investigated. The CMC/PNIPA/Clay hydrogels exhibited a volume phase transition temperature around 32 °C with no significant deviation from the conventional PNIPA hydrogels. The swelling ratio of the CMC/PNIPA/Clay hydrogels gradually decreased with increasing the contents of clay. The influence of pH value on swelling behaviors showed that there is a maximum swelling ratio at pH 5.9. Moreover, the CMC/PNIPA/Clay hydrogels exhibited excellent mechanical properties with high tensile stress and elongation at break in excess of 1200%.     

Catalytic asymmetric cyanosilylation of ketones with chiral Lewis base

The development of broadly applicable and practical catalytic approaches for the enantioselective creation of quaternary stereocenters remains a highly desirable yet challenging goal. In this Communication, we describe a highly enantioselective cyanosilylation of acetal ketones (alpha,alpha-dialkoxy ketones) catalyzed by modified cinchona alkaloids. This reaction is the first highly enantioselective cyanosilylation of ketones catalyzed by an organic chiral Lewis base and is found to be highly efficient with acetal ketones bearing a broad range of alkyl, aryl, alkenyl, and alkynyl substituents. This new catalytic asymmetric reaction, coupled with the versatility of the acetal functionality, provides a broadly useful synthetic method for chiral building blocks bearing quaternary stereocenters. Acetal ketones, readily accessible but previously unexplored in asymmetric synthesis, demonstrate unusual reactivity and selectivity toward the nucleophilic cyanosilylation, thereby suggesting that they may be interesting substrates for other catalytic enantioselective reactions.     

Preparation, phase transformation and photocatalytic activities of cerium-doped mesoporous titania nanoparticles

Cerium-doped mesoporous TiO₂ nanoparticles with high surface area and thermal stable anatase wall were synthesized via hydrothermal process in a cetyltrimethylammonium bromide (CTAB)/Ti(SO₄)₂/Ce(NO₃)₄/H₂O system. The obtained materials were characterized by XRD, FESEM, HRTEM, FTIR spectroscopy, nitrogen adsorption and DRS spectra. Experimental results indicated that the doping of cerium not only increased the surface area of mesoporous TiO₂ nanoparticles, but also inhibited the mesopores collapse and the anatase-to-rutile phase transformation. Moreover, the undoped, doped anatase mesoporous nanoparticles exhibit higher photocatalytic activity than commercial photocatalyst (Degussa, P25), but the maximum photodegradation rate corresponds to the undoped mesoporous TiO₂ nanoparticles. The lower photocatalytic activities of cerium-doped samples compared with undoped one may be ascribed to that the doped cerium partially blocks titania's surface sites available for the photodegradation and absorption of Rhodamine B (RB).     

Analysis of polynuclear aromatic hydrocarbons by glass capillary gas chromatography using simultaneous flame ionization and electron capture detection

The possibility of simultaneous application of an electron capture (ECD) and a flame ionization detector (FID) connected to a glass capillary column for analyzing polynuclear aromatic hydrocarbons (PNA) has been investigated. The ECD/FID ratio is determined for 46 PNA compounds. The ratios vary from 0.02 to 117 with relative standard deviations better than 20 percent determined from 10 replicate analyses. The results suggest that the method may be used for obtaining additional evidence in identifying PNA in environmental samples. Impurities and transformation products in the standard were identified by computerized glass capillary gas chromatography/mass spectrometry. Quinones and diones are responsible for the high EC-response determined in some trace components in the standard. An application of the method is shown for PNA from particulates in urban atmospheres.     

钐(II)类卡宾CH3SmCH2I与乙烯环丙烷化反应及溶剂化效应的理论研究

用密度泛函B3LYP方法研究了过渡金属钐类卡宾与乙烯的环丙烷化反应的机理. 对钐类卡宾试剂CH₃SmCH₂I和CH₂CH₂反应的反应物、中间体、过渡态和产物构型的全部结构几何参数进行了优化, 并计算了THF溶液的溶剂化效应, 用内禀反应坐标(IRC)计算和频率分析方法, 对过渡态进行了验证. 结果表明: CH₃SmCH₂I与CH₂CH₂环丙烷化反应按亚甲基转移机理(通道A)和卡宾金属化机理(通道B)都可以进行, 与锂类卡宾的反应机理相同, 通道A比通道B反应的势垒降低了14.65 kJ/mol. 溶剂化效应使通道B比通道A的反应势垒大幅度提高, 更有利于反应沿通道A进行, 而不利于通道B.