Amorphous High-Entropy Hydroxides of Tunable Wide Solar Absorption for Solar Water Evaporation

The high-entropy materials have raised much attention in recent years due to their extraordinary performances in mechanical, catalysis, energy storage fields. Herein, a new type of high-entropy hydroxides (e.g., NiFeCoMnAl(OH)_x) that are amorphous and capable of broad solar absorption is reported. A facile one-pot co-precipitation method is employed to synthesize these amorphous high-entropy hydroxides (a-HEHOs) under ambient conditions. The a-HEHOs thus obtained display widely tunable bandgap (e.g., from 2.6 to 1.1 eV) due to their high-entropy and amorphous characteristics, enabling efficient light absorbance and photothermal conversion in the solar regime. Further solar water evaporation measurements show that the a-HEHOs delivered a considerable energy conversion efficiency of 55%, comparable to black titanium oxides that are synthesized using more complex and expensive methods.     

基于FDTD的时域混合方法及其在天线前门耦合数值模拟中的应用

强电磁脉冲环境下的平台-机载天线一体化耦合计算属于典型多尺度时域电磁计算问题,采用传统的FDTD方法数值模拟时,由于精细结构的存在导致网格量巨大,计算效率低下。介绍了一种将非均匀FDTD方法与细导线FDTD方法以及多网格集总元件FDTD方法相结合的时域混合方法,能够有效降低计算开销,结合并行计算技术,快速计算得到天线端口上耦合产生的瞬态电压和电流响应,并将该方法成功应用于无人机平台-天线一体化前门耦合数值模拟中。     

ZnMgO/ZnO异质结构中二维电子气的研究

论文根据ZnMgO/ZnO异质结构二维电子气的能带结构及相关理论模型, 采用一维Poisson-Schrodinger方程的自洽求解, 模拟计算了ZnMgO/ZnO异质结构中二维电子气的分布及其对ZnMgO势垒层厚度及Mg组分的依赖关系. 研究发现该异质结构中ZnMgO势垒层厚度存在一最小临界值: 当垒层厚度小于该临界值时, 二维电子气消失, 当垒层厚度大于该临界值时, 其二维电子气密度随着该垒层厚度的增加而增大; 同时研究发现ZnMgO势垒层中Mg组分的增加将显著增强其二维电子气的行为, 导致二维电子气密度的明显增大; 论文对模拟计算获得的结果与相关文献报道的实验结果进行了比较, 并从极化效应和能带结构的角度进行了分析和讨论, 给出了合理的解释. 关键词： 氧化锌 二维电子气 异质结构 理论计算     

荷控忆阻器等效电路分析模型及其电路特性研究

忆阻器是物理上新实现的具有记忆特性的基本二端电路元件. 根据φ-q关系式的泰勒级数形式构建了荷控忆阻器等效电路分析模型, 以三次非线性荷控忆阻器模型为例, 对不同参数条件下的荷控忆阻器进行了伏安关系、有无源性等电路特性的理论分析. 结果表明: 荷控忆阻器的伏安关系具有斜体“8”字形紧磁滞回线特性, 随其参数符号的不同, 荷控忆阻器呈现出无源性和有源性, 导致其电路特性发生相应的变化; 相比无源荷控忆阻器, 有源荷控忆阻器更适用于作为二次谐波信号产生电路使用. 制作了荷控忆阻器特性分析等效电路的实验电路, 实验测量结果很好地验证了理论分析结果. 关键词： 荷控忆阻器 等效电路 伏安关系 电路特性     

TiO2 Nanotube Array/Monolayer Graphene Film Schottky Junction Ultraviolet Light Photodetectors

Schottky junctions made from a titanium dioxide nanotube (TiO₂NT) array in contact with a monolayer graphene (MLG) film are fabricated and utilized for UV light detection. The TiO₂NT array is synthesized by the anodization and the MLG through a simple chemical vapor deposition process. Photoconductive analysis shows that the fabricated Schottky junction photodetector (PD) is sensitive to UV light illumination with good stability and reproducibility. The corresponding responsivity (R), photoconductive gain (G), and detectivity (D*) are calculated to be 15 A W^?1, 51, and 1.5 × 10¹² cm Hz^1/2 W^?1, respectively. It is observed that the fabricated PD exhibits spectral sensitivity and a simple power‐law dependence on light intensity. Moreover, the height of the Schottky junction diode is derived to be 0.59 V by using a low temperature I–V measurement. Finally, the working mechanism of the TiO₂NT array/MLG film Schottky junction PD is elucidated.     

Selection of optimal combinations of inputs in a partial least squares model for prediction of soil organic matter

Abstract

Partial least squares model is widely used in estimation of soil physical and chemical parameters such as soil organic matter and moisture content, due to its advantages in dealing with collinearity of variables like hyperspectral reflectance. However, it is hard to determine optimal combination of partial least squares model input for soil organic matter prediction since there are lots of possibilities such as, different mathematical transformation of spectral reflectance, wavelength ranges, and spectral resolution. Laboratory hyperspectral reflectance of soils in Songnen plain were analyzed in this study, and the orthogonal experimental design method for deriving optimal combination of input variables for soil organic matter prediction models was introduced. For intercalating orthogonal experimental design table, five different levels which commonly used by researchers were assigned to factors. Results show that the optimal combination input for single black soil is using the derivative logarithmic reciprocal reflectance in the wavelength range selected by multiple stepwise regression at a spectral resolution of 5?nm (R²=?0.95, RMSE?=?0.21, and RPD?=?4.49), and different soils is using continuum removed in the wavelength range selected by MSR at a spectral resolution of 5?nm (R²?=?0.77, RMSE?=?0.74, and RPD?=?2.08). With optimal combination input, the partial least squares model prediction ability was evaluated as excellent for single black soil, possible for different soils. This study illustrates the orthogonal experimental design method can be an effective way to identify the optimal input variables of a partial least squares model for soil organic matter prediction, and multiple stepwise regression can be a preprocessing step to reduce hyperspectral data redundancy before using partial least squares to predict soil organic matter. Overall, this study provides a new approach for determining optimal input of partial least squares predicting model.     

On the Volume of Unit Tangent Spheres in a Pinsler Manifold

Motivated by some issues which enter into the Gauss-Bonnet-Chern theorem in Finsler geometry, this paper studies the unit tangent sphere (or indicatrix) I_x M at each point x of a Pinsler manifold M. We demonstrate that the volume of I_mM, calculated with respect to a Riemannian metric induced naturally by the Finsler structure, is in general a function of x. This contrasts sharply with the situation in Riemannian geometry. We also express the derivative of such volume function in terms of the second curvature tensor of the Chern connection. In particular, we find that this function is constant on Landsberg spaces (though that constant need not be equal to the value taken by Riemannian manifolds).     

电枢膛内高速运动控制仿真与试验

电磁轨道发射的过程中,电枢在膛内高速运动时会受到电磁力、电枢初始正压力、摩擦力、空气阻力、烧蚀阻力等多种因素影响,电枢的出口速度呈现出在一定范围内波动的特征。为了提高电枢的出口速度精度,针对膛内电枢与轨道摩擦不均衡性和烧蚀程度不确定的特性,综合考虑脉冲成形网络的电路模型与电枢的动力学特征,建立了电枢在膛内的运动开环控制仿真模型。通过仿真,得出了脉冲电源模块触发时刻与电枢出口速度之间的关系,提出了电枢出口速度闭环控制模型,探究了电枢出口速度控制可行方案。结果表明：应用闭环控制算法,可实现对电枢出口速度的精确控制。     

氧化铟掺铪红外透明导电薄膜

采用射频磁控溅射与退火工艺相结合的方法,分别在石英和硒化锌(ZnSe)衬底上制备了掺铪氧化铟(IHfO)薄膜,掺杂比例In2O3∶HfO2为98wt.%∶2wt.%.测试了薄膜的组成结构和3～5μm红外波段的光电性质,分析了退火温度、薄膜厚度和氧气流速对薄膜性能的影响.X射线衍射、扫描电子显微镜和X射线能谱表明,制备的IHfO薄膜具有氧化铟的立方体结构,掺杂铪并没有影响氧化铟的生长方向,但是减小了晶格间距,铪与铟外层电子形成新的杂化轨道.傅里叶变换红外光谱表明,随着退火温度的增加,IHfO薄膜在3～5μm波段的透过率逐渐下降,沉积在ZnSe衬底上的薄膜具有更平稳的透过率,厚度为100nm薄膜在3～5μm波段平均透过率为68%.测试霍尔效应表明,随着氧气流速的增加,IHfO薄膜电阻率逐渐增加,载流子浓度减小,霍尔迁移率变化不明显.晶界散射是影响IHfO薄膜迁移率的主要因素,当氧气流速为0.3sccm时,薄膜最佳电阻率为3.3×10~(-2)Ω·cm.与透可见光波段的导电氧化铟锡(ITO)薄膜相比,制备的IHfO薄膜可以应用在3～5μm红外波段检测气体,红外制导等领域.     

CiADS束流负载效应前馈补偿的仿真评估

在高功率超导质子直线加速器中,束流负载效应是影响超导腔幅相稳定性的一个重要因素。本工作基于谐振腔建场模型,开发了超导腔系统束流负载效应的时域仿真程序,分析了束流负载效应对超导腔幅相稳定性的影响,并在C-ADS注入器II上通过相关实验测量对仿真结果进行了验证。利用该程序,评估了CiADS超导直线加速器脉冲束流的脉冲长度,以及前馈补偿的时序抖动和束流纹波等因素对腔中电磁场幅相稳定度的影响。仿真结果表明:在当前CiADS直线加速器设计参数下,为满足超导腔中电磁场0.1%与在高功率超导质子直线加速器中,束流负载效应是影响超导腔幅相稳定性的一个重要因素。本工作基于谐振腔建场模型,开发了超导腔系统束流负载效应的时域仿真程序,分析了束流负载效应对超导腔幅相稳定性的影响,并在C-ADS注入器II上通过相关实验测量对仿真结果进行了验证。利用该程序,评估了CiADS超导直线加速器脉冲束流的脉冲长度,以及前馈补偿的时序抖动和束流纹波等因素对腔中电磁场幅相稳定度的影响。仿真结果表明:在当前CiADS直线加速器设计参数下,为满足超导腔中电磁场0.1%与$0.1^{\circ}$的幅相稳定度指标,前馈时序抖动的偏差不能超过0.79 μs,束流流强的直流偏差不能超过0.9%,并且给出了束流纹波的最大抖动幅值与纹波频率之间的关系。这些结果将为CiADS超导直线加速器相关子系统技术指标的确定提供依据。