Thermoresponsive polymersome from a double hydrophilic block copolymer

The article describes synthesis and thermally triggered self‐assembly of a Poly (ethylene oxide)‐block‐poly (N‐insopropylacrylamide) (PEO‐b‐PNIPAm) in aqueous medium. At rt, the polymer remains as unimer, however, at lower critical solution temperature (LCST) of PNIPAm (32 °C), it forms a rather large undefined aggregate which at slightly elevated temperature (～40 °C) converges to well defined polymersome structure (Critical aggregation concentration = 0.45 mg/mL) with hydrodynamic diameter of 40–50 nm. By lowering the temperature, initial swelling of the compact vesicle followed by reversible disassembly to unimer was noticed. The polymersome exhibits encapsulation ability to a hydrophilic dye Calcein which can be spontaneously released by lowering the temperature below cloud point. Likewise a hydrophobic dye namely 8‐Anilino‐1‐naphthalenesulfonic acid (ANS) can also be encapsulated and released by thermal trigger. Detail photoluminescence studies reveal ANS dye can be used as a generalized probe molecule for detecting LCST of a thermoresponsive polymer by “fluorescence on” above LCST even by cursory observation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2444–2451     

Langmuir wave phase-mixing in warm electron-positron-dusty plasmas

An analytical study on nonlinear evolution of Langmuir waves in warm electron-positron-dusty plasmas is presented. The massive dust grains of either positively or negatively charged are assumed to form a fixed charge neutralizing background. A perturbative analysis of the fluid-Maxwell's equations confirms that the excited Langmuir waves phase-mix and eventually break, even at arbitrarily low amplitudes. It is shown that the nature of the dust-charge as well as the amount of dust grains can significantly influence the Langmuir wave phase-mixing process. The phase-mixing time is also found to increase with the temperature.     

Testing nonlocality of single photons using cavities

A scheme is formulated for testing nonlocality of single photons by considering the state of a single photon that could be located within one of two spatially separated cavities. The outcomes of four experiments on this state involving the resonant interactions of two-level atoms with these cavities and a couple of other auxiliary ones is shown to lead to a contradiction with the criterion of locality.     

Organic–Inorganic Hybrid Supermicroporous Iron(III) Phosphonate Nanoparticles as an Efficient Catalyst for the Synthesis of Biofuels

Here we report a novel family of crystalline, supermicroporous iron(III) phosphonate nanomaterials (HFeP‐1‐3, HFeP‐1‐2, and HFeP‐1‐4) with different Fe^III‐to‐organophosphonate ligand mole ratios. The materials were synthesized by using a hydrothermal reaction between benzene‐1,3,5‐triphosphonic acid and iron(III) chloride under acidic conditions (pH≈4.0). Powder X‐ray diffraction, N₂ sorption, transmission and scanning electron microscopy (TEM and SEM) image analysis, thermogravimetric and differential thermal analysis (TGA‐DTA), and FTIR spectroscopic tools were used to characterize the materials. The triclinic crystal phase [P$\bar 1$ (2) space group] of the hybrid iron phosphonate was established by a Rietveld refinement of the PXRD analysis of HFeP‐1‐3 by using the MAUD program. The unit cell parameters are a=8.749(1), b=8.578(1), c=17.725(3) Å; α=104.47(3), β=97.64(1), γ=113.56(3)°; and V=1013.41 ų. With these crystal parameters, we proposed an 24‐membered‐ring open framework structure for HFeP‐1. Compound HFeP‐1‐3, with an starting Fe/ligand molar ratio of 3.0, shows the highest Brunauer–Emmett–Telller (BET) surface area of 556 m²g^?1 and uniform supermicropores of approximately 1.1 nm. The acidic surface of the porous iron(III) phosphonate nanoparticles was used in a highly efficient and recyclable catalytic transesterification reaction for the synthesis of biofuels under mild reaction conditions.     

Head group specificity of novel functionalized surfactants: synthesis,self-assembly and calcium tolerance

The present work describes the synthesis, characterization and application of functionalized surfactants derived through simple organic reaction steps. These surfactants have been particularly tailor made to resist hardness due to calcium ions in water. It is unique of its kind because here the surfactants have an analogous hydrophobic chain but differ structurally in the composition of the head groups in terms of the position of attachment of the chain. The effect of this small variability in the head group on the surfactant property, adsorption, self assembly and calcium tolerance behaviour has been studied in detail. This kind of phenol–keto surfactants has not been reported before. It was also found that one of the surfactants was more tolerant towards Ca²⁺ ion than the other. The individual packing behaviour of the surfactants at the air–water interface has been projected to cause this difference which is very interesting.     

Effect of Cold Atmospheric Plasma Jet and Gamma Radiation Treatments on Gingivobuccal Squamous Cell Carcinoma and Breast Adenocarcinoma Cells

Surgery, chemotherapy and radiotherapy, the conventional treatment modalities of cancer though successful are limited by presence of residual tumor cells, toxic side-effects and treatment resistance, thus raising the need for investigating other novel approaches. Here, we have used a cold atmospheric plasma (CAP) jet and assessed the in vitro efficacy in gingivobuccal squamous cell carcinoma (GB-SCC) – ITOC-03, breast adenocarcinoma—MCF7 and HEK293 cells. Cells lines were subjected to varying doses of ionizing radiation (0, 2, 4, 6, 8 Gy) and CAP jet treatment (0, 60, 180, 240, 300 s). CAP jet treatment showed time dependent increase in H₂O₂ and NO₂^? concentration. Cell viability assay showed potent effect of CAP jet on all three cell lines in comparison to radiation treatment, while helium gas treatment showed minimal inhibitory effect. Irradiated, CAP jet and helium gas treated cells showed loss of nucleic acid features, 788 cm^?1 and 1340 cm^?1 in Raman spectra, indicating DNA damage. Principal Component Analysis (PCA) showed distinct classification of CAP-treated and control cells, while Principal Component – Linear Discriminant Analysis (PC-LDA) based classification of Raman spectra showed ITOC-03 and HEK293 cells to be sensitive to CAP jet and radiation treatment in comparison to MCF7 cells. Collectively, cell viability assay and Raman spectroscopy have shown potent effect of CAP jet in GB-SCC and breast adenocarcinoma cells.

     

Molecular docking,PKPD, and assessment of toxicity of few chalcone analogues as EGFR inhibitor in search of anticancer agents

In the present work, molecular docking of the chalcone analogues with receptor EGFR carried out using erlotinib as reference drug is reported. About 15 chalcone analogues were analyzed CHL(1–15). Molecules CHL2, CHL3, CHL9, CHL11, and CHL15 found strong affinity for receptor EGFR exhibiting binding energies ??7.7 kcal/mol, ??7.5 kcal/mol, ??7.6 kcal/mol, ??7.9 kcal/mol, and ??8.1 kcal/mol, respectively, when erlotinib a reference drug exhibits binding energy ??7.6 kcal/mol. Toxicity for molecules was assessed against the cytochromes P450 (CYP) and P-gp using Swiss ADMET. Molecule CHL9 could be a suitable lead compound inhibitor to CYP1A2 followed by CHL2 inhibitor of CYP1A2 and CYP2C9 and CHL15 with a most stable binding affinity of ??8.1 kcal/mol, inhibiting CYP1A2, CYP2C19, and CYP2D6. CHL3 has a binding affinity of ??7.5 kcal/mol, inhibiting all the 05 CYP enzymes (CYP1A2, CYP2C19, CYP2C9, CYP2D6, and CYP3A4). CHL11 has a binding affinity of ??7.9 kcal/mol, inhibiting CYP1A2, CYP2C19, and CYP2C9. Considering inhibition of CYP family enzymes by molecules, further here we have perform the enrichment analysis to these CYP family enzymes and reported the metabolic pathways which were probably affected by inhibition of these enzymes using EnrichR online enrichment analysis server. The current predictions over these 15 chalcone derivatives will be needed to further investigate in vivo and in vitro conditions to identify the optimum therapeutic efficacy and least toxicity.

     

Hyperthin Membranes for Gas Separations via Layer‐by‐Layer Assembly

Thin film formation via the Layer‐by‐Layer method is now a well‐established and broadly used method in materials science. We have been keenly interested in exploiting this technique in the area of gas separations. Specifically, we have sought to create hyperthin (<100 nm) polyelectrolyte‐based membranes that have practical potential for the separation of CO₂ from N₂ (flue gas) and H₂ from CO₂ (syngas). In this personal account, we summarize recent studies that have been aimed at measuring the influence of a variety of factors that can affect the permeability and permeation selectivity of hyperthin polyelectrolyte multilayers (PEMs).     

Fast-atom bombardment and tandem mass spectrometry of macrolide antibiotics

Molecular weights of macrolide antibiotics can be determined from either (M + H)⁺ or (M + Met)⁺, the latter desorbed from alkali metal salt-saturated matrices. The ion chemistry of macrolides, as determined by tandem mass spectrometry (MS/MS), is different for ions produced as metallated than those formed as (M + H)⁺ species. An explanation for these differences is the location of the charge. For protonated species, the charge is most likely situated on a functional group with high proton affinity, such as the dimethylamino group of the ammo sugar. The alkali metal ion, however, is bonded to the highly oxygenated aglycone. As a result, the collision-activated dissociation spectra of protonated macrolides are simple with readily identifiable fragment ions in both the high and low mass regions but no fragments in the middle mass range. In contrast, the cationized species give complex spectra with many abundant ions, most of which are located in the high mass range. The complementary nature of the fragmentation of these two species recommends the study of both by MS/MS when determining the structure or confirming the identity of these biomaterials.