Production from ilmenite of TiO2-supported catalysts for selective catalytic reduction of NO with NH3

Economic production of titanium dioxide (yield >98 %) from ilmenite has been achieved by use of a modified sulfate reduction process. A series of samples were prepared by varying the concentration of titanium dioxide nuclei (0.2, 0.3, and 0.6 %) and further impregnation with antimony and vanadia. The structural and acidic properties of the samples were comprehensively studied by X-ray diffraction (XRD), transmission electron microscopy, BJH pore size distribution, and temperature-programmed desorption of NH₃. The XRD results revealed the presence of intense peaks from anatase titanium dioxide. Enhancement of surface area was observed for second-time filtered samples, possibly because of loss of iron from the bulk. As a result, formation of additional micropores was apparent from N₂ adsorption and desorption isotherms. Among all the antimony and vanadia-doped samples, the first-time filtered sample with the low concentration of nuclei (0.2 %) had the highest catalytic activity at low temperatures, owing to its larger pore size and abundant acidic species.     

Sol–gel synthesis and optical behavior of Mg–Ce–O nano-crystallites

The Mg–Ce–O powder are shown to contain periclase-type MgO and/or fluoride-type cerium oxide (CeO₂) depending upon the composition (x) defined by Ce/(Ce + Mg) atomic ratio. Lattice contraction of pariclase phase of MgO (average crystallite size ~8.8 nm) at Ce content of ‘x’ = 0.20 in comparison to pure MgO (crystallite size ~9.5 nm) has been realized due to oxygen vacancy formation. The optical band gap values of CeO₂ varies (3.0–3.2 eV) due to oxygen vacancy formation in CeO₂ phase, crystallite size and/or Ce³⁺/Ce⁴⁺ ratio. Further, the addition of Ce has shown to reduce the physisorption and chemisorption of water significantly as reflected by (1) suppression of related absorption peaks and (2) absence of magnesium hydroxide, Mg(OH)₂, bands in Fourier transform infrared spectra.     

Synthesis of Thermally Stable Energetic 1,2,3‐Triazole Derivatives

Various thermally stable energetic polynitro‐aryl‐1,2,3‐triazoles have been synthesized through Cu‐catalyzed [3+2] cycloaddition reactions between their corresponding azides and alkynes, followed by nitration. These compounds were characterized by analytical and spectroscopic methods and the solid‐state structures of most of these compounds have been determined by using X‐ray diffraction techniques. Most of the polynitro‐bearing triazole derivatives decomposed within the range 142–319 °C and their heats of formation and crystal densities were determined from computational studies. By using the Kamlet–Jacobs empirical relation, their detonation velocities and pressures were calculated from their heats of formation and crystal densities. Most of these newly synthesized compounds exhibited high positive heats of formation, good thermal stabilities, reasonable densities, and acceptable detonation properties that were comparable to those of TNT.     

Solid‐State Structural Transformations and Photoreactivity of 1D‐Ladder Coordination Polymers of PbII

An attempt has been made to design double‐stranded ladder‐like coordination polymers (CPs) of hemidirected Pb^II. Four CPs, [Pb(μ‐bpe)(O₂C‐C₆H₅)₂] ? 2H₂O ( 1 ), [Pb₂(μ‐bpe)₂(μ‐O₂C‐C₆H₅)₂(O₂C‐C₆H₅)₂] ( 2 ), [Pb₂(μ‐bpe)₂(μ‐O₂C‐p‐Tol)₂(O₂C‐p‐Tol)₂] ? 1.5 H₂O ( 3 ) and [Pb₂(μ‐bpe)₂(μ‐O₂C‐m‐Tol)₂(O₂C‐m‐Tol)₂] ( 4 ) (bpe=1,2‐bis(4′‐pyridyl)ethylene), have been synthesised and investigated for their solid‐state photoreactivity. CPs 2 – 4 , having a parallel orientation of bpe molecules in their ladder structures and being bridged by carboxylates, were found to be photoreactive, whereas CP 1 is a linear one‐dimensional (1D) CP with guest water molecules aggregating to form a hydrogen‐bonded 1D structure. The linear strands of 1 were found to pair up upon eliminating lattice water molecules by heating, which led to the solid‐state structural transformation of photostable linear 1D CP 1 into photoreactive ladder CP 2 . In the construction of the double‐stranded ladder‐like structures, the parallel alignment of C?C bonds in 2 – 4 is dictated by the chelating and μ₂‐η²:η¹ bridging modes of the benzoate and toluate ligands. The role of solvents in the formation of such double‐stranded ladder‐like structures has also been investigated. A single‐crystal‐to‐single‐crystal transformation occurred when 4 was irradiated under UV light to form [Pb₂(rctt‐tpcb)(μ‐O₂C‐m‐Tol)₂(O₂C‐m‐Tol)₂] ( 5 ).     

Four‐Center Oxidation State Combinations and Near‐Infrared Absorption in [Ru(pap)(Q)2]n (Q=3,5‐Di‐tert‐butyl‐N‐aryl‐1,2‐benzoquinonemonoimine,pap=2‐Phenylazopyridine)

The complex series [Ru(pap)(Q)₂]ⁿ ([ 1 ]ⁿ–[ 4 ]ⁿ; n=+2, +1, 0, ?1, ?2) contains four redox non‐innocent entities: one ruthenium ion, 2‐phenylazopyridine (pap), and two o‐iminoquinone moieties, Q=3,5‐di‐tert‐butyl‐N‐aryl‐1,2‐benzoquinonemonoimine (aryl=C₆H₅ ( 1⁺ ); m‐(Cl)₂C₆H₃ ( 2⁺ ); m‐(OCH₃)₂C₆H₃ ( 3⁺ ); m‐(tBu)₂C₆H₃ ( 4 ⁺)). A crystal structure determination of the representative compound, [ 1 ]ClO₄, established the crystallization of the ctt‐isomeric form, that is, cis and trans with respect to the mutual orientations of O and N donors of two Q ligands, and the coordinating azo N atom trans to the O donor of Q. The sensitive C? O (average: 1.299(3) Å), C? N (average: 1.346(4) Å) and intra‐ring C? C (meta; average: 1.373(4) Å) bond lengths of the coordinated iminoquinone moieties in corroboration with the N?N length (1.292(3) Å) of pap in 1 ⁺ establish [Ru^III(pap⁰)(Q^.?)₂]⁺ as the most appropriate electronic structural form. The coupling of three spins from one low‐spin ruthenium(III) (t_2g⁵) and two Q^.? radicals in 1 ⁺– 4 ⁺ gives a ground state with one unpaired electron on Q^.?, as evident from g=1.995 radical‐type EPR signals for 1 ⁺– 4 ⁺. Accordingly, the DFT‐calculated Mulliken spin densities of 1 ⁺ (1.152 for two Q, Ru: ?0.179, pap: 0.031) confirm Q‐based spin. Complex ions 1 ⁺– 4 ⁺ exhibit two near‐IR absorption bands at about λ=2000 and 920 nm in addition to intense multiple transitions covering the visible to UV regions; compounds [ 1 ]ClO₄–[ 4 ]ClO₄ undergo one oxidation and three separate reduction processes within ±2.0 V versus SCE. The crystal structure of the neutral (one‐electron reduced) state ( 2 ) was determined to show metal‐based reduction and an EPR signal at g=1.996. The electronic transitions of the complexes 1 ⁿ– 4 ⁿ (n=+2, +1, 0, ?1, ?2) in the UV, visible, and NIR regions, as determined by using spectroelectrochemistry, have been analyzed by TD‐DFT calculations and reveal significant low‐energy absorbance (λ_max>1000 nm) for cations, anions, and neutral forms. The experimental studies in combination with DFT calculations suggest the dominant valence configurations of 1 ⁿ– 4 ⁿ in the accessible redox states to be [Ru^III(pap⁰)(Q^.?)(Q⁰)]²⁺ ( 1 ²⁺– 4 ²⁺)→[Ru^III(pap⁰)(Q^.?)₂]⁺ ( 1 ⁺– 4 ⁺)→[Ru^II(pap⁰)(Q^.?)₂] ( 1 – 4 )→[Ru^II(pap^.?)(Q^.?)₂]^? ( 1 ^?– 4 ^?)→[Ru^III(pap^.?)(Q^2?)₂]^2? ( 1 ^2?– 4 ^2?).     

Vasicine as tridentate ligand for enantioselective addition of diethylzinc to aldehydes

The first report of natural l-vasicine as tridentate chiral ligand for the enantioselective addition of diethylzinc to a variety of aliphatic and aromatic aldehydes is described. The ligand generates R-isomer of the secondary alcohols upto 98% ee. The quinazoline structure possibly imparts rigidity to the ligand and hence, consistently high enantioselectivity. The importance of the quinazoline ring was also supported by the reaction with other related ligands, partially lacking the structural features, thus resulting in poor enantioselectivity.     

Stereoselective tandem synthesis of oxazolo-fused pyrroloquinolines from o-alkynylaldehydes via Ag(I)-catalyzed regioselective 5-exo-dig ring closure

A tandem approach for the regio- and stereoselective synthesis of oxazolo-fused pyrroloquinolines 3a–l via the reaction of o-alkynylaldehydes 1a–i with chiral amino alcohols 2a–c under mild reaction conditions is described. The possible participation of the pyridine ring in the regioselective formation of 5-exo-dig cyclized products was supported by the controlled experiments. The structures and stereochemistry of the products were confirmed by NOESY and X-ray crystallographic studies.     

Micelles catalyzed one pot regio- and chemoselective synthesis of benzo[a]phenazines and naphtho[2,3-d]imidazoles ‘in H2O’

An efficient, novel, and concise one pot regio- and chemoselective synthesis of benzo[a]phenazines (4) and naphtho[2,3-d]imidazoles (8) has been accomplished in excellent yields by nucleophilic substitution reaction of 2,3-dichloro-1,4-naphthoquinone (1) with o-phenylenediamine (2) and benzamidines (7) respectively ‘in H₂O’ using base and micelles (SDS) as catalyst. Analog reaction of 2,3-dichloro-1,4-naphthoquinone (1) with 2-aminobenzenethiol (9) under identical conditions led to formation of a mixture of benzo[b]phenothiazine (10), benzo[a]phenothiazine (11), and benzo[a]-1,4-benzothiazino-3,2-phenothiazine (12) in 17%, 23%, and 57% yields, respectively.     

Catalyst-free one-pot synthesis of benzimidazoles from 1,2-diaminoarenes and alcohols

A new and efficient protocol is described for the one-pot synthesis of benzimidazoles from a variety of aryl alcohols and 1,2-diaminoarenes. The yields were ranging from moderate to excellent. Moreover, the present method is utilizing alcohols instead of aldehydes and the reactions are carried out under solvent- and catalyst-free conditions, offering an environmentally benign process.     

An efficient ‘on-water’ synthesis of 1,4-dihydropyridines using Fe3O4@SiO2 nanoparticles as a reusable catalyst

An ‘on-water’, efficient, high yielding, expeditious method has been developed for the synthesis of 1,4-dihydropyridine (1,4-DHP) derivatives via an one-pot multi-component condensation of dimedone or 4-hydroxycoumarine, aldehydes, and ammonium acetate using Fe₃O₄@SiO₂ nanoparticles as a recyclable heterogeneous catalyst. This method takes advantage of the fact that water, a green solvent is used in combination with Fe₃O₄@SiO₂ nanoparticles as catalyst which can be easily recovered magnetically and reused for further runs.