爆炸磁压缩发生器爆炸管运动研究

 报导了对爆炸磁压缩发生器(MFCG)的爆炸管进行的爆轰试验结果。用电子学方法测试了爆炸管采用的粉状RDX炸药的爆轰速度;采用高速分幅摄影方法,观测了爆炸管在管内RDX炸药爆轰产物驱动下的膨胀运动过程,测试了膨胀角、对称性和膨胀速度。试验表明,爆炸管在膨胀至 3倍初始半径内未发现破裂现象,其性能满足MFCG的设计要求。     

Polar modes with elastic restoring forces, “bose condensation” and the possibility of a metastable “ferroelectric” state

The system consists of an electric polarisation field coupled on the one hand to an elastic field and on the other to a thermal reservoir. When the polarisation modes are pumped, Bose condensation in the lowest mode occurs, for energy inflow above a certain critical amount. It is shown that elastic forces, called into play to stabilise the excitation of the polar modes, lowers the threshold for Bose condensation. With further increase in the pumping rate the possibility exists for the softening of the polarisation oscillations leading, in the presence of quartic self-interaction of the polarisation field (inserted for stability), to a metastable ferroelectric state. The work represents an attempt to develop a microscopic approach to the Fröhlich model for the dynamics of macromolecules (such as proteins and enzymes) of biological significance.     

Perturbation theory for a bound piezoelectric polaron

We calculate the change in energy of an electron bound to a Coloumb center, due to the piezoelectric interaction with acoustic phonons, to second-order in the interaction. We show that the recent calculation by Bajaj et al., while correct to order β², is incorrect to order β⁴. β is the strength of the Coloumb potential. The coefficient of the β⁴ term is shown to be divergent.     

热等静压对NbTi/Cu多芯超导线加工过程的影响

采用传统方法生产的NbTi/Cu多芯超导线在生产芯数较多的超导线时存在填充系数较大的问题,这直接影响了芯丝的整齐排布,所以组装完成后加入热等静压过程.研究了经过热等静压和未经过热等静压的NbTi/Cu多芯超导线的加工性能.经过试验证明,经过100～150MP,2小时热等静压处理的NbTi/Cu多芯超导线坯锭在加工过程中具有良好的加工性能,提高了超导线复合坯锭的成品率;而未经过热等静压处理的NbTi/Cu多芯超导线坯锭加工性能较差,坯锭内部缺陷较多.     

An analysis of seismic attenuation in random porous media

The attenuation of seismic wave in rocks has been one of the interesting research topics, but till now no poroelasticity models can thoroughly explain the strong attenuation of wave in rocks. In this paper, a random porous medium model is designed to study the law of wave propagation in complex rocks based on the theory of Biot poroelasticity and the general theory of stochastic process. This model sets the density of grain, porosity, permeability and modulus of frame as random parameters in space, and only one fluid infiltrates in rocks for the sake of better simulation effect in line with real rocks in earth strata. Numerical simulations are implemented. Two different inverse quality factors of fast P-wave are obtained by different methods to assess attenuation through records of virtual detectors in wave field (One is amplitude decay method in time domain and the other is spectral ratio method in frequency domain). Comparing the attenuation results of random porous medium with those of homogeneous porous medium, we conclude that the attenuation of seismic wave of homogeneous porous medium is far weaker than that of random porous medium. In random porous media, the higher heterogeneous level is, the stronger the attenuation becomes, and when heterogeneity σ = 0.15 in simulation, the attenuation result is consistent with that by actual observation. Since the central frequency (50 Hz) of source in numerical simulation is in earthquake band, the numerical results prove that heterogeneous porous structure is one of the important factors causing strong attenuation in real stratum at intermediate and low frequency.     

Experiments and analyses of a new type optical system for computed radiography

A new high-performance laser scanning system is designed. In this system, a scanning arm consisting of a pentagonal prism and a scanning object lens is used to replace the traditional Fθ lens, and a circular imaging plate transmission mechanism is specially designed in order to meet the requirement of the scanning arm. At the same time, the stimulation fluorescence can be obtained by the scanning arm. Some main factors that influence the spatial resolution and the performance of the laser scanner system are analyzed, and the analysis results are presented, which is helpful for further optimization design of the system. Experimental results indicate that the images obtained by the system have good visual effects and can meet the requirements of industrial inspection.     

Mobile Rayleigh Doppler wind lidar based on double-edge technique

<正>We describe a mobile molecular Doppler wind lidar(DWL) based on double-edge technique for wind measurement of altitudes ranging from 10 to 40 km.A triple Fabry-Perot etalon is employed as a frequency discriminator to determine the Doppler shift proportional to the wind velocity.The lidar operates at 355 nm with a 45-cm-aperture telescope and a matching azimuth-over-elevation scanner that provides full hemispherical pointing.To guarantee wind accuracy,a single servo loop is used to monitor the outgoing laser frequency to remove inaccuracies due to the frequency drift of the laser or the etalon.The standard deviation of the outgoing laser frequency drift is 6.18 MHz and the corresponding velocity error is 1.11 m/s.The wind profiles measured by the DWL are in good agreement with the results of the wind profile radar(WPR).Evaluation is achieved by comparing at altitudes from 2 to 8 km.The relative error of horizontal wind speed is from 0.8 to 1.8 m/s in the compared ranges.The wind accuracy is less than 6 m/s at 40 km and 3 m/s at 10 km.     

Effect of polarization on efficiency of volume Bragg grating filter

<正>Diffraction efficiency of volume Bragg grating,whose period is in the same order as the incident wavelength, is related to the polarization direction of the incident linear polarized beam.When two linearly polarized recording beams with the same polarization direction are used for recording volume Bragg gratings in a photopolymer with diffusion amplification,the azimuth of polarization of the reconstruction beam influences the diffraction efficiency of the grating.When the probe beam is linearly polarized and oriented orthogonally to the grating vectors,the±1-order diffraction beams are also linearly polarized with polarization direction parallel to that of the probe beam.According to the results,a two-dimensional nonspatial optical filter consisting of the volume Bragg gratings would achieve significantly higher efficiency.