Shallow donor states induced by in-diffused Cu in ZnO: a combined HREELS and hybrid DFT study

A combined experimental and first principles study of Cu defects in bulk ZnO is presented. Cu particles are epitaxially deposited on the polar O-ZnO(0001) surface at room temperature. Upon heating, a broadening of the quasielastic peak in high resolution electron energy loss spectra is observed, corresponding to an electronic doping effect of Cu atoms in bulk ZnO with an ionization energy of 88 meV. Cu impurities in ZnO, although commonly acting as acceptors, are presently observed to induce shallow donor states. We assign these to interstitial Cu species on the basis of a hybrid density functional study.     

Measuring inter-DNA potentials in solution

Interactions between short strands of DNA can be tuned from repulsive to attractive by varying solution conditions and have been quantified using small angle x-ray scattering techniques. The effective DNA interaction charge was extracted by fitting the scattering profiles with the generalized one-component method and inter-DNA Yukawa pair potentials. A significant charge is measured at low to moderate monovalent counterion concentrations, resulting in strong inter-DNA repulsion. The charge and repulsion diminish rapidly upon the addition of divalent counterions. An intriguing short range attraction is observed at surprisingly low divalent cation concentrations, approximately 16 mM Mg2+. Quantitative measurements of inter-DNA potentials are essential for improving models of fundamental interactions in biological systems.     

Deposition of Au/TiO2 film by pulsed laser

Au nanoparticles, which were photoreduced by a Nd:YAG laser in HAuCl₄ solution containing TiO₂ colloid and accompanied by the TiO₂ particles, were deposited on the substrate surface. The film consisting of Au/TiO₂ particles was characterized by the absorption spectra, scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. The adhesion between the film and substrate was evaluated by using adhesive tape test. It was found that the presence of TiO₂ dramatically enhanced the adhesion strength between the film and the substrate, as well as the deposition rate of film. The mechanism for the deposition of Au/TiO₂ film was also discussed.     

弯曲氧化锌微米线微腔中的回音壁模

本文用微区共聚焦荧光光学显微镜在垂直于氧化锌微米线c轴的方向测量微米线上不同位置的光谱,通过对比直的和弯曲的微米线上TE和TM偏振的光谱,观察到了弯曲氧化锌微米线中不同位置的回音壁模式的移动,其机理是在弯曲应力作用下激子能级发生了移动,带边附近的介电常数也随之变化,导致微腔中的回音壁模式发生移动.     

阿尔芬波加热托卡马克等离子体的能量平衡问题

本文用“剖面不变性”确定等效电子热导系数,研究了TCA装置上阿尔芬波加热的能量平衡,结果与实验符合很好。证明本文所用的方法对不同装置、不同加热方式都适用。     

激光二极管列阵泵浦的Nd：BGO腔内倍频激光器稳定输出的研究

首次报道激光二极管列阵浦的Ｎｄ：ＢＧＯ腔内倍频激光器的实验研究结果。在激光谐振腔内加布儒斯特片与倍频晶体ＫＴＰ形成Ｌｏｙｔ双折射滤光片。以此进行选模，获得了３．５ｍＷ连续，稳定的单模绿光输出。     

膨胀的热的富重子夸克─胶子物质的双轻子产生的抑制

从完全核阻止的假定出发基于３＋１维ＲＨＥ研究了双轻子谱，并得到结论：如果在极端相对论性原子核碰撞中富重子的夸克－胶子物质真地产生了，那么随着初始重子密度的增加，在不变质量２ｍπ和１ＧｅＶ之间双轻子的产生将会显示出强烈的抑制，而且将有一个反常的峰出现在不变质量０．７５ＧｅＶ附近．这些预言可以在ＣＥＲＮ和Ｂｒｏｏｋｈａｖｅｎ即将开展的实验中得到检验．     

Influence of aramid fiber moisture regain during atmospheric plasma treatment on aging of treatment effects on surface wettability and bonding strength to epoxy

One of the main differences between a low-pressure plasma treatment and an atmospheric pressure plasma treatment is that in atmosphere, the substrate material may absorb significant amount of water which may potentially influence the plasma treatment effects. This paper investigates how the moisture absorbed by aramid fibers during the atmospheric pressure plasma treatment influences the aging behavior of the modified surfaces. Kevlar 49 fibers with different moisture regains (MR) (0.5, 3.5 and 5.5%, respectively) are treated with atmospheric pressure plasma jet (APPJ) with helium as the carrier gas and oxygen as the treatment gas. Surface wettability and chemical compositions, and interfacial shear strengths (IFSS) to epoxy for the aramid fibers in all groups are determined using water contact angle measurements, X-ray photoelectron spectroscopy (XPS), and micro-bond pull out tests, respectively. Immediately after the plasma treatment, the treated fibers have substantially lower water contact angles, higher surface oxygen and nitrogen contents, and larger IFSS to epoxy than those of the control group. At the end of 30 day aging period, the fibers treated with 5.5% moisture regain had a lower water contact angle and more polar groups on the fiber surface, leading to 75% improvement of IFSS over the control fibers, while those for the 0.5 and 3.5% moisture regain groups were only 30%.