时间空间均为二阶的新型NND差分格式

张涵信的研究表明,为了避免激波前后差分解的波动,在差分格式的改型方程中三阶导数的系数在激波上游必须是正的,而在激波下游则必须是负的.据此提出了一种新型的无波动、无自由参数耗散性的差分格式,它对时间和空间都是二阶的.证明了此格式是TVD的,而且是推广的二阶Годунов格式.在处理有激波的流场时,此格式是Lax-Wendroff格式的改进和推广.给出了若干算例,计算结果表明,此格式不仅无波动,而且具有形式紧凑、应用方便、分辨率高、稳定性准则中的Courant数较大的优点.     

Identification of an IGF2BP2-Targeted Peptide for Near-Infrared Imaging of Esophageal Squamous Cell Carcinoma

Esophageal squamous cell carcinoma (ESCC) is one of the most lethal malignancies globally. Peptide-based tumor-targeted imaging is critical for ESCC imaging. In this study, we aim to identify a peptide-targeting IGF2BP2 that specifically binds to human ESCC for near-infrared imaging of esophageal cancer. Applying phage display techniques, we identified a peptide target for IGF2BP2 which was confirmed to be highly expressed in ESCC cell lines or tumor tissue and may serve as an imaging target for ESCC. We conjugated the peptide to the NIRF group, Cy5, and further evaluated the targeting efficacy of the probe at a cellular level and in animal tumor models. The Cy5 conjugated peptide (P12-Cy5) showed a high binding affinity to human ESCC cells in vitro. In vivo, optical imaging also validated the tumor-targeting ability of P12-Cy5 in KYSE-30-bearing subcutaneous ESCC tumor models. Furthermore, the results of biodistribution showed a significantly higher fluorescence intensity in tumors compared to scrambled peptide, which is consistent with in vivo observations. In summary, an IGF2BP2-targeted peptide was successfully identified. In vitro and in vivo experiments confirmed that P12-Cy5 has high affinity, specificity and tumor-targeting properties. Thus, P12-Cy5 is a prospective NIR probe for the imaging of ESCC.     

薄宽带钢倾斜浪板形屈曲变形的解析研究

薄宽带钢的倾斜浪是一种产生机理与解决对策都未知的板形缺陷。本文通过有限元仿真结合现场实测分析提出了一种倾斜浪产生机理的新解释,并且基于艾利应力函数和S. Timoshenko最小功原理建立了倾斜浪前屈曲变形的力学模型和计算方法,获得了其前屈曲应力场分布的表达式;运用伽辽金虚位移原理解法获得了其临界屈曲载荷;推导建立了薄宽带钢倾斜浪的后屈曲摄动求解方法,计算获得的后屈曲模态和有限元计算获得的瓢曲模态符合良好。研究结果可为板带材轧制过程中倾斜浪及其倾斜角度的预测和控制提供理论依据。     

基于吸收互补有机半导体本体复合薄膜的高性能柔性光突触晶体管

采用光吸收互补的聚(3-己基噻吩)(P3HT)和引达省并二噻吩-苯并噻二唑共聚物(PIDT-BT), 通过溶液法制备了两者的本体复合异质结构有机半导体薄膜, 并研究了薄膜的表面结构和光电性质. 将PIDT-BT:P3HT复合薄膜作为一类新型光敏沟道层, 与聚电解质介电材料相结合, 制备了高性能柔性低电压光突触晶体管. 考察了不同光刺激条件对光突触晶体管性能的影响及半导体机制, 发现PIDT-BT:P3HT器件具有明显光突触特性, 并且相较于单纯PIDT-BT或P3HT器件具有更高响应的兴奋性突触后电流. 基于PIDT-BT:P3HT薄膜的光突触器件, 在绿红双色光刺激下的响应大于两种单色光分别刺激的响应之和, 表明附加光刺激可调控器件的记忆效率. 该研究为发展高性能光响应半导体薄膜及柔性低功耗光突触器件提供了新策略.     

Analysis of computer virus propagation behaviors over complex networks: a case study of Oregon routing network

Nonlinear Dynamics - This paper mainly aims to explore the propagation behaviors of computer virus over complex networks under the combined effects of network topology and removable storage media....     

Thermo‐Driven Controllable Emulsion Separation by a Polymer‐Decorated Membrane with Switchable Wettability

A thermoresponsive Poly(N‐isopropylacrylamide) (PNIPAAm)‐modified nylon membrane was fabricated via hydrothermal route. Combining rough structure, proper pore size, and thermoresponsive wettability, the membrane can separate at least 16 types of stabilized oil‐in‐water and water‐in‐oil emulsions at different temperatures. Below the LCST (ca. 25 °C), the material exhibits hydrophilicity and underwater superoleophobicity, which can be used for the separation of various kinds of oil‐in‐water emulsions. Above the LCST (ca. 45 °C), the membrane shows the opposite property with high hydrophobicity and superoleophilicity, and it can then separate stabilized water‐in‐oil emulsions. The material exhibits excellent recyclability and high separation efficiency for various kinds of emulsions and the hydrothermal method is facile and low‐cost. The membrane shows good potential in real situations such as on‐demand oil‐spill cleanup, industrial wastewater treatment, remote operation of oil/water emulsion separation units, and fuel purification.     

Direct observation of Cu interphase precipitation in continuous cooling transformation by atom probe tomography

Atom probe tomography (APT) combined with electron back scatter diffraction and transmission electronic microscopy (TEM) is utilized to characterize the nature of copper precipitation during austenite–ferrite transformation in a continuous cooling high-strength low-alloy steel. The copper precipitation manners in association with the austenite decomposition kinetics are studied. The prevailing microstructure of the continuous cooling steel consists of acicular ferrite (AF), which is formed at an intermediate cooling rate of 10?°C/s. Besides, a limited volume of polygonal ferrite (PF) because of fast cooling rate and a trace of retained austenite are detected. Numerous copper-rich phase is found by TEM observation both in highly dislocated AF and dislocation-free PF. Generally, the copper-rich precipitates have comparatively large sizes and are considered to be formed by interphase precipitation during austenite–ferrite transformation. A high number density of nanometre sized copper-rich clusters that are lack of diffraction contrast in conventional TEM observation are detected by APT. These smaller copper-rich clusters, which are usually located between the linear-arranged copper-rich precipitates, are considered to be formed from supersaturated solid solution after the cessation of austenite–ferrite transformation. That means an ageing reaction for Cu precipitation occurs during continuous cooling transformation. The copper-rich precipitates and clusters are both rich in nickel, manganese and iron.     

Reduced CuFe2O4 for catalytic oxidation of methyl orange by activation of persulfate: performances and mechanisms

Research on Chemical Intermediates - Bimetallic Fe0-based catalysts have been shown to be effective heterogeneous catalysts for elimination of organic pollutants by activating persulfate (PS). In...     

多烯和花菁染料分子设计及其非线性光学性质研究进展

根据一种新的增强分子非线性光学性质的设计思想 ,讨论了多烯和花菁染料的结构和性质关系 ,综述了这类染料的非线性光学性质及其应用进展 ,并对有机非线性光学材料的发展前景进行了预测。     

近零膨胀Zr0.5Hf0.5V1.4P0.6O7材料的制备及其性能研究

采用传统的固相法合成了近零膨胀氧化物功能陶瓷材料Zr_0.5Hf_0.5V_1.4P_0.6O₇,用X射线衍射(XRD)、Raman光谱和热膨胀法对Zr_0.5Hf_0.5V_1.4P_0.6O₇的热膨胀系数、各向同性和相变进行了测试,通过Hf⁴⁺/P⁵⁺共掺杂使得材料具有较低的热膨胀系数,研究发现合成的Zr_0.5Hf_0.5V_1.4P_0.6O₇具有Pa3立方相结构,从334 K附近到673 K较宽的温度范围内的线性热膨胀系数为-1.56×10^-6 K^-1,表现出稳定的近零热膨胀特性。由于固溶体内部微结构的影响造成膨胀仪实验结果与变温X射线衍射结果存在一定的差距。Zr_0.5Hf_0.5V_1.4P_0.6O₇具有的近零膨胀特性为通过负热膨胀材料合成膨胀系数可控的材料提供了基础。