Rough隶属函数关于集合并与交的一种高精度计算方法

近些年来，许多处理近似问题的方法陆续被提出，其中利用Rough集理论计算两个集合的并和交的Rough隶属函数方法是被用较多的一种方法，但毕竟该方法精度较差。为此，介绍了一种精度较高的计算两个集合的并和交的Rough隶属函数方法，它克服了前者利用Rough集理论计算Rough隶属函数的复杂性，而迎来了简单和高精度的特点。     

Ultrasonic investigation of amorphous carbon in various frequencies at low temperatures from 2.1 to 300 K

Using pulse echo overlap measurement, the elastic behavior of amorphous carbon has been studied at ambient and low temperatures. The smaller ratio B/G of the bulk modulus to shear modulus and smaller Poisson's ratio σ at room temperature indicate that there is an intrinsic stiffening of transverse acoustic phonons in the amorphous carbon. The acoustic velocity and attenuation for longitudinal modes have been measured between 2.1 and 300 K at three frequencies of 7, 21 and 35 MHz, respectively. Their frequency and temperature dependence are observed. The elastic constant C₁₁ increases with decreasing temperature and show enhanced stiffening at low temperatures. In the 130-220 K region, the abnormal change and effect of longitudinal velocity and attenuation with temperature and frequency, and a phase transition associated with structure relaxations are discussed.     

Richards模型在蔬菜生长预测中的应用

本文从 Richards模型的数学表达出发 ,阐述了模型中各参数初始值的确定以及优化过程 .并利用菜花和菠菜的试验数据建立其“最优”生长模型 .     

Miniature InGaAsP/InP phase modulator for integrated opto-electronics

Miniature, etching ridge InGaAsP/InP Phase Modulator with highly efficient phase shifting efficiency of 60°/V.mm and 43°/V.mm for TE and TM modes, respectively, and 3 dB bandwidth of 650 MHz at 1.52 μm are reported. It is well suited for integrated opto-electronics. Some functions depending on bandwidth of the devices are discussed.     

The honeycomb network structure of poly[[[μ2‐1,3‐bis(1H‐benzimidazol‐2‐yl)benzene‐κ2N3:N3′](μ2‐terephthalato‐κ2O:O′)zinc(II)] ethanol solvate]

The terephthalate dianion and the bis(imidazolyl)benzene ligand of the title compound, {[Zn(C₈H₄O₄)(C₂₀H₁₄N₄)]·C₂H₆O}_n, each bridges two adjacent zinc centers, resulting in a layer‐type coordination polymer; the zinc center shows tetrahedral coordination. The disordered ethanol solvent molecules occupy the spaces between the layers and are hydrogen bonded to the layers. The two symmetry‐independent dianions lie on different inversion sites.     

Preparation of dye-loaded SiO2 nanoparticles

A room temperature method for the encapsulation of pyrene in SiO₂ nanoparticles is described. The relation between alkoxysilane surfactant chain length, reactant molar ratios and the uptake of dye, sample morphology, photophysical properties, and the ability of the silicate matrix to protect the encapsulated dye was examined. The synthesis can easily be adapted for the encapsulation of other hydrophobic and thermolabile substances, and used in the development of nanostructured optically active coatings, films and monoliths.     

Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007     

Synthesis and application as polymer electrolyte of hyperbranched polyether made by cationic ring‐opening polymerization of 3‐{2‐[2‐(2‐hydroxyethoxy)ethoxy]ethoxymethyl}‐3′‐methyl‐oxetane

A novel cyclic ether monomer 3‐{2‐[2‐(2‐hydroxyethoxy)ethoxy]ethoxy‐methyl}‐3′‐methyloxetane (HEMO) was prepared from the reaction of 3‐hydroxymethyl‐3′‐methyloxetane tosylate with triethylene glycol. The corresponding hyperbranched polyether (PHEMO) was synthesized using BF₃·Et₂O as initiator through cationic ring‐opening polymerization. The evidence from ¹H and ¹³C NMR analyses revealed that the hyperbranched structure is constructed by the competition between two chain propagation mechanisms, i.e. active chain end and activated monomer mechanism. The terminal structure of PHEMO with a cyclic fragment was definitely detected by MALDI‐TOF measurement. A DSC test implied that the resulting polyether has excellent segment motion performance potentially beneficial for the ion transport of polymer electrolytes. Moreover, a TGA assay showed that this hyperbranched polymer possesses high thermostability as compared to its liquid counterpart. The ion conductivity was measured to reach 5.6 × 10^?5 S/cm at room temperature and 6.3 × 10^?4 S/cm at 80 °C after doped with LiTFSI at a ratio of Li:O = 0.05, presenting the promise to meet the practical requirement of lithium ion batteries for polymer electrolytes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3650–3665, 2006     

LF λ-subgroup Generated by LF Subset

In this paper .an important property layer-preserving of LF group and an concept LF λ-subgroup generated by LF subset will be introduced. On the height of LF group theory ,we recognize the concept generated subgroup more clearly.     

微波常压法合成水杨酸酯

在浓硫酸催化下，采用微波常压法由水杨酸分别与正丁醇、异丁醇、正戊醇和异戊醇反应合成相应的水杨酸酯。结果表明：当水杨酸：醇：Ｈ２ＳＯ４＝１：５．５：０．３（摩尔比）时，采用５６０Ｗ微波辐射２２ｍｉｎ，水杨酸酯的产率可达８８．７％￣９６．４％，反应速度至少是常规反应的１４倍。