Illumination technique based on integrating sphere with an unequal radius, hyper-uniform luminance and large-field angle

In order to meet the measurement requirements of image sensors’ uniformity of the CCD system with a large-field angle, the design for the form and structure of the integrating sphere, with 600–800 mm and hyper-uniform luminance double hemisphere is presented. LightTools software is used for simulation. The simulation result indicates that the compact structure of the integrating sphere with asymmetric double hemisphere renders both the design values and systematic performance parameters superior to those of the common integrating sphere. The integrating sphere system designed is manufactured and its optical parameters are tested. The test result indicates that at the outlet of the integrating sphere, the variation of illuminance is less than 2.3%, and the variation of luminance on the inner surface is less than 4.4%. Hence, it is concluded that this system can be widely utilized in measuring image sensors’ uniformity of the photoelectric imaging system with a large-field angle.     

Unstable Surface Waves in Running Water

We consider the stability of periodic gravity free-surface water waves traveling downstream at a constant speed over a shear flow of finite depth. In case the free surface is flat, a sharp criterion of linear instability is established for a general class of shear flows with inflection points and the maximal unstable wave number is found. Comparison to the rigid-wall setting testifies that the free surface has a destabilizing effect. For a class of unstable shear flows, the bifurcation of nontrivial periodic traveling waves is demonstrated at all wave numbers. We show the linear instability of small nontrivial waves that appear after bifurcation at an unstable wave number of the background shear flow. The proof uses a new formulation of the linearized water-wave problem and a perturbation argument. An example of the background shear flow of unstable small-amplitude periodic traveling waves is constructed for an arbitrary vorticity strength and for an arbitrary depth, illustrating that vorticity has a subtle influence on the stability of free-surface water waves.     

Gas barrier properties of titanium oxynitride films deposited on polyethylene terephthalate substrates by reactive magnetron sputtering

Titanium oxynitride (TiN_xO_y) films were deposited on polyethylene terephthalate (PET) substrates by means of a reactive radio frequency (RF) magnetron sputtering system in which the power density and substrate bias were the varied parameters. Experimental results show that the deposited TiN_xO_y films exhibited an amorphous or a columnar structure with fine crystalline dependent on power density. The deposition rate increases significantly in conjunction as the power density increases from 2 W/cm² to 7 W/cm². The maximum deposition rate occurs, as the substrate bias is −40 V at a certain power densities chosen in this study. The film's roughness slightly decreases with increasing substrate bias. The TiN_xO_y films deposited at power densities above 4 W/cm² show a steady Ti:N:O ratio of about 1:1:0.8. The water vapor and oxygen transmission rates of the TiN_xO_y films reach values as low as 0.98 g/m²-day-atm and 0.60 cm³/m²-day-atm which are about 6 and 47 times lower than those of the uncoated PET substrate, respectively. These transmission rates are comparable to those of DLC, carbon-based and Al₂O₃ barrier films. Therefore, TiN_xO_y films are potential candidates to be used as a gas permeation barrier for PET substrate.     

小孔等离子体运动实验方法

在间接驱动惯性约束聚变的黑腔中,辐射烧蚀的高Z等离子体的流体力学运动过程对激光注入黑腔的效率、辐射场均匀性和通过诊断口的黑腔辐射温度诊断都有显著影响。为研究诊断口在黑腔辐射场中的等离子体缩口过程,用激光产生X光辐射加热低Z泡沫填充的金黑腔诊断口,以激光辐照钛平面靶产生的2～5 keV高能段窄能区X光作为背光源,用X光分幅相机获得了源靶和小孔靶两种靶型的小孔等离子体运动过程图像,研究了X光烧蚀的小孔等离子体的流体力学运动过程,探索了定量测量小孔等离子体面密度的空间分布与时间演化过程的实验诊断方法,初步给出小孔等离子体的面密度。     

(S)-1-苄基-3-羟基吡咯烷的合成及红外光谱研究

从L-苹果酸出发,经过与苄胺缩合反应得到(S)-1-苄基-3-羟基吡咯烷-2,5-二酮,再通过硼氢化钠-碘体系还原制得重要的医药中间体(S)-1-苄基-3-羟基吡咯烷。采用红外光谱法对原料、中间体及产物进行了测试并对硼氢化钠-碘体系还原酰亚胺的机理进行了研究。通过比较原料、中间体及产物相应特征吸收峰的消失或是出现,可知所得的产物为(S)-1-苄基-3-羟基吡咯烷;还原机理研究表明,硼氢化钠在碘催化下生成的硼烷与酰亚胺中的羰基形成四元环状过渡态,同时另外一分子硼烷与酰亚胺中的氮原子形成N-BH3复合物,然后羰基还原完全,得到(S)-1-苄基-3-羟基吡咯烷-硼烷复合物,最后在甲醇作用下脱去硼烷得到最终产物。     

基于OWDP的IP网络性能实时监测系统设计与实现

针对传统的RTDP（往返时延与丢包协议）网络性能测量方法及ping探测方法的不足，设计并实现了一种基于OWDP（单路时延与丢包协议）的新型单路网络性能测量系统。该系统研究网络流量特点和测试流的发送规律，综合考虑了安全策略因素，最后的实验结果表明，系统具有良好的可扩展性，适合对大规模的网络进行实时监测。     

冰长石的标型特征及其在金矿找矿中的标志作用

通过对新疆石英滩金矿石中冰长石的标型特征的研究表明，冰长石是一种典型的低温热液矿物，它不仅是一种研究矿床成因的标型矿物，而且还是一个寻找低温热液型金矿床的标志物，在金矿找矿中具有重要的标志作用。     

新疆野生黑加仑与马林果实的营养成分分析

通过对新疆野生黑加仑和野生马林的脂肪油，8种微量元素，17种氨基酸以及维生素C的含量进行测定得出：黑加仑脂肪油含量为17．9％，马林的脂肪油含量为22．3％，其中，黑加仑脂肪油中，r－亚麻酸的含量为19．02％，而马林中，其含量为9．40％，黑加仑中K，Na,Ca,Cu,Zn,Fe的含量比马林中的含量高，而Mn,Mg元素的含量却比马林含量低；马林的维生素C含量为16．22mg/g，黑加仑的含量为108mg/g，黑加仑的氨基酸的总量为1．63％，马林为1．14％。     

Percolative effects and giant dielectric tunability of BaTiO3–LuFe2O4 composites

We report on exotic dielectric properties of composite materials consisting of traditional ferroelectric BaTiO₃ and electronic ferroelectric LuFe₂O₄. The composites were synthesized by a simple ceramic processing method with properties that can be tailored by adjusting LuFe₂O₄ concentration. A percolative effect was observed at the volume fraction of ～0.26, which led to an abrupt increase in the dielectric permittivity. For composites with high LuFe₂O₄ fractions, a giant dielectric tunability was observed over a broad temperature interval, which is in strong contrast to traditional ferroelectrics.     

Reel-to-reel fabrication of meter-long YBCO coated conductor

YBa₂Cu₃O_7?δ (YBCO) superconductors were coated on the CeO₂/YSZ/Y₂O₃ buffered Ni-5at%W tapes by a reel-to-reel pulsed laser deposition (PLD). The process of a multi-layer deposition of YBCO film was explored. X-ray diffraction texture measurements showed good both in-plane and out of plane crystalline orientations in YBCO films. The average values calculated at a full width at half maximum (FWHM) of the peaks from phi-scans (φ) and omega (ω) scans for one meter-long YBCO tape were 7.49° and 4.71°, respectively. The critical current (I_c) was over 200 A/cm-width at 77 K and under self-field for meter-long YBCO tape. The critical transition temperature of the YBCO tape was typically as 90.1 K with 0.5 K transition widths.