THE STRUCTURAL BASIS OF THE POOR FIBRIN SPECIFICITY OF UROKINASE(Ⅰ)——KNOWLEDGE-BASED PREDICTION OF KRINGLE STRUCTURES OF UROKINASE AND ITS RELATED PROTEINS

The Kringle-1 structure of plasminogen (PGK-1), the Kringle-2 structure of tissue plasminogen activator (PAK-2) and the Kringle structure of prourokinase (UKK) has been modeled on the basis of the three-dimensional structure of Kringle-1 of prothrombin (PTK-1) at 2.8 resolution. The predicted three-dimensional structure of these Kringles shows that the binding site of PGK-1 is characterized by an apparent dipolar site, the polar parts of which are separated by a hydrophobic region. PAK-2 possesses the anionic center but has not a cationic binding center which might be provided by a guanidinium group from Arg-69 located adjacent to the Arg-71 position. UKK possesses neither the anionic binding center nor the cationic center which are probably the main reason for the poor fibrin specificity of urokinase.     

Analysis of Equilibrium and Kinetics of Chromium-Fluoride Complexation from Spectroscopic Data via Chemometrics Methods

IntroductionStudies on reversible kinetic systems are consi-dered as a hotspot of chemical and biochemical kineticresearches[1,2]. Of late, some researches have been fo-cused on the simultaneous optimization of the obverseand reverse rate constants[3,4].H…     

化学镀钴基合金镀液中钴的快速测定

研究了采用显色剂 苦胺酸偶氮变色酸对化学镀钴基合金镀液中钴含量进行测定的试验条件,在pH11的氨 氯化铵缓冲溶液中,钴与显色剂配合物的最大吸收峰在650nm波长处,钴(Ⅱ)在0～60μg/25ml范围内服从比耳定律,表观摩尔吸光系数为3.1×104L·mol-1·cm-1。该法测定钴的选择性好,在大量镍存在下,也能准确测定,对镀液样品进行了测定,相对标准偏差小于1%,结果满意。     

Synthesis, Structure and Conductivity of the New Charge-transfer Salt (ET)_2(CH_2=CH-CH_2-SO_3)·H_2O

ET is one of the most famous electron-donor molecules, which forms charge-transfer complexes (abbr. CT-complexes) with various types of counterions. These complexes have received intense attention because a wide range of physical properties such as conductivity and superconductivity1, ferromagnetism2-4 and nonlinear optical properties5 was found in these materials. Although the majority of the ET-based CT-complexes were prepared by combining with inorganic counterions, CT-complexes with o…     

LBO晶体超光滑表面抛光机理

胶体SiO2抛光LBO晶体获得无损伤的超光滑表面,结合前人对抛光机理的认识,探讨了超光滑表面抛光的材料去除机理,分析了化学机械抛光中的原子级材料去除机理.在此基础上,对胶体SiO2抛光LBO晶体表面材料去除机理和超光滑表面的形成进行了详细的描述,研究抛光液的pH值与材料去除率和表面粗糙度的关系.LBO晶体超光滑表面抛光的材料去除机理是抛光液与晶体表面的活泼原子层发生化学反应形成过渡的软质层,软质层在磨料和抛光盘的作用下很容易被无损伤的去除.酸性条件下,随抛光液pH值的减小抛光材料的去除率增大;抛光液pH值为4时,获得最好的表面粗糙度.     

碘化铅单晶体生长新方法探索

本文分析了用布里奇曼法生长碘化铅单晶体的结晶过程。发现坩埚下降法生长碘化铅单晶体过程中,碘的蒸发与凝结、铅的分凝与沉淀是影响晶体质量的两个重要因素。提出了采用U型安瓿提拉方式生长碘化铅单晶体的新方法,有效抑制了碘的蒸发并排除了分凝的铅,获得了桔红色半透明的碘化铅晶体。经测试,晶体的结晶性好,红外透过率达45%,电阻率为1.7×1012Ω.cm,为制备性能优异的碘化铅室温核辐射探测器奠定了基础。     

燃烧剂对低温燃烧合成Pr-CeO2粉体结构与性能的影响

以乙酸铵和柠檬酸为燃烧剂,Ce(NO3)3·6H2O和Pr6O11为主要原料,采用低温燃烧法(LCS)制备了Ce0.95Pr0.5O2纳米晶粉体.用DSC、XRD、SEM及色度测试等手段研究了Ce0.95Pr0.5O2纳米晶微粒前驱体的着火温度、产物晶体结构、晶体形貌及色度.结果表明:乙酸铵和柠檬酸作为燃烧剂的反应前驱体着火温度分别在250℃和300℃左右.两种燃烧产物均为单一的萤石型固溶体.与柠檬酸相比,乙酸铵作为燃烧剂得到的燃烧产物结晶程度更完善、Pr离子进入CeO2晶格的含量更多、呈色更好,且颗粒的团聚程度变小.根据Scherrer公式计算,用两种燃烧剂制备产物的平均晶粒尺寸分别为20～30 nm和10～15 nm,为纳米晶颗粒.最后得到Ce0.95Pr0.5O2粉体的颗粒尺寸则在200～300 nm之间.乙酸铵与硝酸铈的最佳摩尔配比为2:1,柠檬酸与硝酸铈的最佳摩尔配比为3:1.     

非稳态油膜力作用下偏角不对中碰摩转子系统振动特性分析

建立了非稳态油膜力、碰摩力作用下,偏角不对中轴系的横向振动模型,将Jeffcott转子模型推广至约束条件下的轴系振动模型,通过引入转子间的位移约束,由Lagrange方程导出了不对中轴系系统的振动方程.仿真研究表明:由于不对中的存在,轴系横向振动是强非线性、非定常、同时含有自激励、参数激励和外激励的三自由度振动系统;由于从动轴与主动轴的不对中,导致了转轴间的运动约束,使轴系横向振动系统比Jeffcott转子动力学模型所描述的振动系统少了一个自由度.随着偏角不对中量、转轴质量比的变化,系统出现周期、概周期、混沌运动特征.不对中轴系处于概周期运动时,呈现出自激振动特征.其结果可为旋转机械故障诊断、轴系对中及设备的安全运行提供更为准确的理论参考.     

Structural Stabilities of Ordered Arrays of Nb4 Clusters on NaCI（IO0） Surface

Adsorption of ordered （2 × 2） arrays of Nb4 clusters on the insulating surface of NaCI（100） is studied by the first-principles calculations within the density functional theory. The calculations on the relaxed geometries and cohesive energies show that both the tetrahedron and quadrangle-Nb4 can be stably adsorbed on this substrate, which may have important applications. The adsorption of quadrangle-Nb4 on the NaCl（100） surface is more stable than that of tetrahedron-Nb4. Both the Nb4 clusters studied and a single Nb atom prefer the top site of the Cl atom in the NaCl（100） surface. Electronic structure analysis suggests that the interactions between the Nb4 clusters and the substrate are weak.     

基于孔口出流模型的实验研究及理论分析

基于孔口出流模型对底部有小孔的圆柱体容器中液体液面高度随时间的变化规律进行了实验研究,并通过计入液体表面张力引起的孔口收缩和流体黏滞力导致的能量损失对实验结果进行了理论分析,与实验结果一致.