Organophosphine/phosphite‐stabilized silver(I) complexes bearing N‐acetylbenzamide ligand: synthesis,characterization and potential application in metal organic chemical vapor deposition

New N‐silver(I) acetylbenzamide complexes of type L_n?AgNC₉H₈O₂ (L = PPh₃; n = 1, 2a; n = 2, 2b; n = 3, 2c; L = P(OEt)₃; n = 1, 2d; n = 2, 2e; n = 3, 2f) were prepared. These complexes were obtained in high yields and characterized by elemental analysis, ¹H NMR, ¹³C{H} NMR, ³¹P{H} NMR and IR spectroscopy, respectively. The molecular structure of 2b has been determined by X‐ray single‐crystal analysis in which the silver atom is in a distorted tetrahedral geometry and crystallizes as cis–trans. New N‐silver(I) acetylbenzamide complexes have a four‐membered ring, which could influence their chemical and physical properties and modulate volatility. Metal organic chemical vapor deposition experiments were carried out successfully at 400°C and 450°C using 2e as precursor for the deposition of silver films, respectively. The high‐purity silver film obtained at 400°C is dense and homogeneous. Copyright © 2012 John Wiley & Sons, Ltd.     

Anti‐static Agent Containing Zinc Oxide and its Modification for PA6 Fiber

A new anti‐static agent was synthesized from zinc oxide‐adipic acid‐polyethylene glycol and caprolactam by three‐step reactions. The antistatic agent (called poly(ether ester amide zinc oxide) or PEEAZ) was analyzed by IR and DSC. The results showed that zinc oxide existed in the main chain of PEEAZ. The glass temperature and melt temperature of poly(ether ester amide zinc oxide) (referred to as PEEAZ in the following) decreased with increasing poly(ether ester zinc oxide) increasing in PEEAZ. Antistatic PA6 fiber was obtained by adding PEEAZ 2–8% (wt/wt) to PA6 during blend spinning. The specific resistance and the static half‐value period of PA6 fiber was less than 10⁹Ω · cm and 60 sec, respectively. Excellent antistatic property remained after being washed 30 times.     

Electrogenerated Fe(I) Porphyrins: Efficient Electrocatalysts for Reductive Dechlorination of DDT in N,N′‐Dimethylformamide

Two iron(I) porphyrins were electrogenerated and then utilized as catalysts for the reductive dechlorination of 1,1‐bis(4‐chlorophenyl)‐2,2,2‐trichloroethane (DDT) in N,N′‐dimethylformamide. No reaction is observed between DDT and the Fe(III) or Fe(II) forms of the porphyrin, but the electrogenerated Fe(I) porphyrin efficiently catalyzes the electroreduction of DDT to give (1,1‐bis(4‐chlorophenyl)‐2,2‐dichloroethane) DDD, (1,1‐bis(4‐chlorophenyl)‐2,2‐dichloroethylene) DDE and (1,1‐bis(4‐chlorophenyl)‐2‐dichloroethane) DDMU as determined by GC‐MS analysis. The reductive dechlorination was monitored by electrochemistry, controlled potential electrolysis and spectroelectrochemistry and a mechanism for the reaction involving the reduced porphyrins and DDT is proposed. Comparisons are also made between the catalytic properties of metalloporphyrins containing iron, cobalt and manganese central metal ions under the same solution conditions.     

Coagulation behaviors and in-situ flocs characteristics of composite coagulants in cyanide-containing wastewater: Role of cationic polyelectrolyte

In this paper,composite coagulants(PFS,PFSC05,PFSC1 and PFSC5),prepared by mixing polyferric sulfate(PFS)and cationic polyelectrolyte(CP)coagulants with different weight percent(Wp)of CP(Wp=0%,0.5%,1%and 5%,respectively),were adopted to treat cyanide-containing wastewater.PFSC5 exhibited superior coagulation performances at optimal conditions:the removal of total cyanide(TCN)and chemical oxygen demand(COD)was 95%–97%and 50%–55%,respectively.The effects of CP on the properties and structure of flocs were investigated by laser diffraction instrument and small-angle laser light scattering(SALLS),respectively.The results show that the flocs of PFSC5 have higher growth rate,higher strength factor and lower recovery factor than other flocs.They are also much denser and more uniform owing to the higher fractal dimension(Df)and less microflocs(10–100 m).Furthermore,the dense structure of the PFSC5 flocs can be restored after shear and is more resistant to hydraulic conditions.Particularly,detailed morphology evolution of the flocs was in-situ detected by on-line particle imaging.Due to strong ionic strength in wastewater,the CP in PFSC5 plays a significant role of adsorption,while the main mechanism of CP is electrostatic patch aggregation during the PFSC05 systems.     

Size-Exclusion Chromatography of Asphaltenes: An Experimental Comparison of Commonly Used Approaches

Asphaltenes, the heaviest and most polar fraction of crude oil, are responsible for the clogging of oil pipelines and of underground reservoir rocks. Asphaltenes are defined as a solubility class (toluene- or benzene-soluble, n-alkane insoluble), and a consensus is still lacking on the molar mass (M) averages, distribution, and range of these materials. Size-exclusion chromatography (SEC) is among the most widely employed methods for characterizing the M averages and distributions of both natural and synthetic polymers and, as such, has seen widespread application in the study of asphaltenes. SEC analysis of asphaltenes presents a number of challenges, however, some inherent to all low-M materials and some unique to these particular analytes. Here, we have experimentally compared several of the most commonly used approaches to SEC of asphaltenes, in hope of both demonstrating the influence of experimental conditions upon the results obtained as well as to determine optimal conditions of analysis. In the end, while the former goal was met, the latter one remains an open challenge in the field.     

Practical synthesis of C1–8 fragment of autolytimycin via a chelation-controlled diastereoselective addition of diisopropenylzinc to α-methoxy aldehyde

The C1–8 fragment of autolytimycin was synthesized via a reliable 10-step route capable of delivering 41% overall yield at multi-gram scale. As a key step, a chelation-controlled isopropenylation of α-oxygenated aldehydes was established with a reagent combination of diisopropenylzinc, magnesium halide, and a dichloromethane/toluene mixed solvent. Cram-chelate isopropenylation products dominated for aldehydes with a small α-substituents, such as –OMe and –OBn groups, while the Felkin product could be obtained with a bulky –OTBS group.     

Microfluidic-directed assembly of uniform fluorescent supraballs from CdTe nanocrystals-loaded acrylosilane microemulsion

We report herein a facile approach of fabricating fluorescent supraballs from CdTe nanocrystals (NCs)-loaded acrylosilane microemulsion by a simple microfluidic strategy. Initially, core–shell acrylosilane microemulsion with poly(methylmethacrylate-co-butylacrylate-co-vinyltri(isopropoxy)silane) (poly (MMA-co-BA-co-VPS)) as the core and poly(methylmethacrylate-co-butylacrylate-co-vinyltri(isopropoxy)silane-co-acrylamide) (poly(MMA-co-BA-co-VPS-co-AM)) as the shell were synthesized by differential microemulsion polymerization. Subsequently, CdTe NCs were assembled with these acrylosilane microemulsion particles in the presence of N′-(ethylcarbonimidoyl)-N, N-dimethylpropane-1, 3-diaminemonohydrochloride. Eventually, we fabricated uniformly distributed fluorescent supraballs using the as-prepared CdTe-loaded acrylosilane microemulsion as the discontinuous phase, and methylsilicone oil as the continuous phase by means of a microfluidic device. These fluorescent supraballs display unique colors and favorable fluorescence, which might be useful in optoelectronic applications, such as fluorescent switches, light-emitting diode displays, and illuminations.     

Terbinafine hydrochloride intercalated in montmorillonite: synthesis and characterization

The novel antifungal hybrid of terbinafine hydrochloride (TER-HCl)/montmorillonite was synthesized by the intercalation method under mechanical stirring. Intercalation of TER-HCl in the MMT galleries was characterized by X-ray diffraction (XRD), Fourier transform infrared spectra, elemental analysis (EA). and thermogravimetric analysis (TGA). The results from IR, TGA, and EA showed a difference in chemical composition of the MMT and the TER-HCl/MMT. XRD analysis showed that the basal spacing of montmorillonite significantly expanded from 1.53 to 2.79 nm. TER-HCl was successfully intercalated into the interlayer of MMT, and 28 % of TER-HCl was released after 48 h in 0.9 % (w/v) NaCl aqueous solution (pH 7) at 37 ± 0.5 °C. The antifungal activity of the hybrid against Candida albicans was evaluated using the inhibitory zone method and the minimum inhibitory concentration. The TER-HCl/MMT strongly inhibited C. albicans. These results show that TER-HCl/MMT can be useful in biomedical applications.     

Concise synthesis of aromatic tertiary amines via a double Petasis–borono Mannich reaction of aromatic amines,formaldehyde, and organoboronic acids

A simple and efficient strategy to construct aromatic tertiary amines via a double Petasis–borono Mannich reaction of aromatic amines, formaldehyde, and organoboronic acids has been developed. The transformation provides a useful method for the synthesis of amine derivatives.