Instabilities in free-surface electroosmotic flows

Instability of a thin electrolyte film undergoing a direct current electroosmotic flow has been investigated. The film with a compliant electrolyte–air interface is flowing over a rigid charged substrate. Unlike previous studies, inclusion of the Maxwell stresses in the formulation shows the presence of a new finite wavenumber shear-flow mode of instability, alongside the more frequently observed long-wave interfacial mode. The shear mode is found to be the dominant mode of instability when the electrolyte–solid and electrolyte–air interfaces are of opposite charge or of same charge but have very large zeta-potential at the electrolyte–air interface. The conditions for mode-switch (interfacial to shear) and the direction of the travelling waves are discussed through stability diagrams. Interestingly, the analysis shows that when the interfaces are of nearly same zeta potential, the ‘free’ electrolyte–air interface behaves more like a ‘stationary’ wall because of the ion transport in the reverse direction of the flow.     

氖等电子序列2p^5nl（l=s,d）系列的高激发态结构

本文用本征通道量子亏损理论方法（ＥＱＤＴ方法）计算了氖等电子序列２ｐ＾５ｎｌ（ｌ＝ｓ，ｄ）系列的高激发态结构。得到基本结构参量（ＥＱＤＴ参量）随净电荷数Ｚｃ增大的变化规律，并从静电相互作用下自旋－轨道相互作用之间的竞争角度给出确切的物理解释。以ＮｅＩ为实例，给出其高激发态结构的具体数值结果。     

一种生物柴油代用品在HZSM-5分子筛催化剂上的催化热解

为了深入了解生物柴油在ZSM-5沸石上的催化反应机理,在常压的流动反应器中进行了生物柴油代用品丁酸甲酯在氢型ZSM-5(HZSM-5)催化剂上的热解和催化热解. 热解产物使用气相色谱-质谱法定性和定量测量. 动力学模型和实验表明,气相中氢提取反应是热解过程中丁酸甲酯分解的主要途径,但在HZSM-5上,丁酸甲酯则主要通过解离生成烯酮和甲醇消耗;与无催化反应相比,丁酸甲酯在HZSM-5上的初始分解温度降低了约300 K. 并且通过Arrhenius方程获得了在催化热解和均相热解条件下丁酸甲酯消耗的表观活化能. 明显降低的表观活化能证实了HZSM-5对丁酸甲酯热解的催化性能. 此外催化剂的活化温度对HZSM-5的某些催化性能具有一定的影响. 该研究对进一步的实际生物柴油燃料的催化燃烧具有一定的指导意义.     

结构—饱和土壤相互作用的固结有限元分析

讨论了结构与饱和土壤相互作用的固结分析问题.对于结构利用多重子结构分析技术实现向饱和土交界面上的凝聚.从而建立了结构与饱和土壤相互作用的固结控制方程.文中给出了问题求解的一次性算法方案,采取压力主从关系的手段处理边界上的不排水条件.文末给出数值算例.本文工作为大型结构与土体相互作用固结分析研究工作的深入创造了条件.     

关于矩阵分解为稳定矩阵之和的讨论

要解决的问题是一个矩阵是否可以分解为若干稳定 (连续时间意义下 )矩阵的和 .通过推广Ito,Hattori and Maeda在文献 [2 ]中使用的方法并运用其中的成果 ,我们得到了更为准确的相关结论 .     

均匀聚焦磁场中束晕-混沌的孤子控制

采用粒子.束核模型,对均匀聚焦磁场中满足K-V分布的离子束进行模拟研究.观察到束晕.混沌现象,基于束晕.混沌的非线性控制策略,提出控制束晕.混沌的孤子函数控制器,并给出具体的实施方案.模拟研究表明,运用这种方法可以消除束晕及其再生现象,达到对束晕.混沌的有效控制.     

纤维素热解过程中活性纤维素的生成研究

热重分析发现活性纤维素的生成始于530 K左右,对应于失重图上的肩部及SDTA曲线中强烈的放热峰.在辐射加热闪速热裂解试验台上获取了一种可溶于水、高温下易分解、室温下呈固态且稳定存在的黄色中间产物.扫描电镜图片证明在热裂解初期纤维素经历了一个熔化和相互粘结的状态,产物的红外谱图证实了大量的羰基和羧基官能团的生成.高效液相色谱分析证明其主要成分是一系列聚合度不同的低聚糖,推断该低聚糖即为活性纤维素.     

A sagittally focusing double‐multilayer monochromator for ultrafast X‐ray imaging applications

The development of a sagittally focusing double‐multilayer monochromator is reported, which produces a spatially extended wide‐bandpass X‐ray beam from an intense synchrotron bending‐magnet source at the Advanced Photon Source, for ultrafast X‐ray radiography and tomography applications. This monochromator consists of two W/B₄C multilayers with a 25 Å period coated on Si single‐crystal substrates. The second multilayer is mounted on a sagittally focusing bender, which can dynamically change the bending radius of the multilayer in order to condense and focus the beam to various points along the beamline. With this new apparatus, it becomes possible to adjust the X‐ray beam size to best match the area detector size and the object size to facilitate more efficient data collection using ultrafast X‐ray radiography and tomography.     

Composite viscoelasticity in glassy,transitional and molten states

As part of a study of viscous and elastic behaviors, over a range of temperatures from below the glass transition up to the hot melt, we here report steady-shear viscosities at 0.007 to 13 s^?1 and at 160 to 220 °C of polystyrene containing 0 to 60% by mass of 0.18-micron diameter titanium dioxide particles. The materials were shearthinning without a yield stress, with a constant activation energy at constant stress, but having a shear-dependent activation energy at constant shear rate — proportional to the volume fraction of the polymer matrix. Superposition of the flow curves at different temperatures for the unfilled and filled systems was possible. All the data were represented by one equation with four parameters: 1) a shear stress coefficient (units Pa · s²); 2) a characteristic stress level for non-Newtonian behavior, independent of temperature and composition; 3) an activation energy at constant stress; and 4) an Einstein coefficient (or intrinsic viscosity of the filler). Other equations also fitted the data, but the others diverged widely when extrapolated.     

Magnetic transition and large reversible magnetocaloric effect in EuCu1.75P2 compound

The magnetocaloric effect(MCE) in EuCu1.75P2 compound is studied by the magnetization and heat capacity measurements.Magnetization and modified Arrott plots indicate that the compound undergoes a second-order phase transition at TC ～ 51 K.A large reversible MCE is observed around TC.The values of maximum magnetic entropy change(-△SxMma) reach 5.6 J·kg-1·K-1 and 13.3 J·kg-1·K-1 for the field change of 2 T and 7 T,respectively,with no obvious hysteresis loss in the vicinity of Curie temperature.The corresponding maximum adiabatic temperature changes(△Tadmax) are evaluated to be 2.1 K and 5.0 K.The magnetic transition and the origin of large MCE in EuCu1.75P2 are also discussed.