用3-巯基丙酸修饰的CdTe量子点作为荧光探针对镉离子的荧光光度测定

对水热合成CdTe量子点的方法加以改进,并合成了用3-巯基丙酸(MPA)修饰的CdTe量子点(MPA-CdTe QD′s)。该量子点具有荧光特性,激发、发射波长分别为320,558nm。试验了17种常见金属离子对此量子点荧光强度的影响,结果发现只有Cd(Ⅱ)离子对其荧光有增强作用;Hg(Ⅱ)、Cu(Ⅱ)、Ag(Ⅰ)则对其荧光有猝灭作用,加入适量抗坏血酸和碘化钾可消除这3种金属离子的荧光猝灭作用。试验在pH 6的缓冲介质中,以20μL MPA-CdTe QD′s作为荧光探针,加入不同浓度的Cd(Ⅱ)离子并在反应6min后,体系的荧光增强程度与Cd(Ⅱ)离子浓度在5.0×10-7~3.9×10-5 mol·L-1范围内呈线性关系,检出限(3s/k)为4.8×10-7 mol·L-1。     

PW_(11)O_(39)Co(Ⅱ)(H_2O)~(5-)的均相及异相体系可见光催化性能研究

以模型污染物罗丹明B(RhB)的光降解为探针,评估了Keggin型钴取代杂多阴离子PW11O39Co髤(H2O)5-(PW11Co)及其异相体系PW11Co/D301R的可见光催化活性,提出了光催化反应的机理,同时考察了催化剂用量、溶液酸度以及溶液中PW11Co和RhB的相互作用对RhB可见光催化降解速率的影响。实验结果表明,PW11Co均相体系及其异相体系PW11Co/D301R对RhB的可见光降解均有较高的光催化活性,但PW11Co/D301R的光催化活性更高。导致RhB降解的主要是羟基自由基。与PW11Co均相体系相比,在PW11Co/D301R异相体系中由于PW11Co与RhB的配位作用大为减弱,同时D301R对RhB具有富集作用,因而大大提高了RhB的光催化降解速率。     

十三氟辛基修饰的疏水有机-无机杂化二氧化硅膜孔结构、氢气分离及水热稳定性

采用1,2-双(三乙氧基硅基)乙烷(BTESE)和十三氟辛基三乙氧基硅烷(PFOTES)为前驱体,在酸性条件下通过溶胶-凝胶法制备了十三氟辛基修饰的有机-无机杂化SiO2膜材料。利用接触角测量、红外光谱、动态光散射和N2吸附等测试技术分别对膜材料的疏水性、溶胶粒径和孔结构进行表征,并深入研究有支撑膜材料的氢气渗透、分离性能以及长期水热稳定性。结果表明,十三氟辛基修饰后的膜材料由亲水性变成了疏水性,当nPFOTES/nBTESE=0.6时膜材料对水的接触角达到(110.4±0.4)°,膜材料还保持微孔结构,孔径分布在0.5~0.8 nm。氢气在修饰后的膜材料中的输运遵循微孔扩散机理,在300℃时,氢气的渗透率达到8.5×10-7mol·m-2·s-1·Pa-1,H2/CO2,H2/CO和H2/SF6的理想分离系数分别为5.49,5.90和18.36,均高于相应的Knudsen扩散分离因子。在250℃且水蒸气物质的量分数为5%水热环境下陈化250 h,氢气渗透率和H2/CO2的理想分离系数基本保持不变,膜材料具有良好的水热稳定性。     

Preparation of P(MBA‐co‐MAA)/Zr(OH)4/P(EGDMA‐co‐MAA)/TiO2 Tetra‐layer Hybrid Microspheres and the Corresponding ZrO2/TiO2 Double‐shelled Hollow Microspheres

Double‐shelled zirconia/titania (ZrO₂/TiO₂) hollow microspheres were prepared by the selective removal of the polymer components via the calcination of the corresponding tetra‐layer poly(N,N′‐methylenebisacryl amide‐co‐methacrylic acid) (P(MBA‐co‐MAA))/Zr(OH)₄/poly(ethyleneglycol dimethacrylate‐co‐methacrylic acid) (P(EGDMA‐co‐MAA))/TiO₂ hybrid microspheres. These tetra‐layer microspheres were synthesized by the combination of the distillation copolymerization of N,N(‐methylenebisacryl amide‐co‐methacrylic acid (MBA) or ethyleneglycol dimethacrylate (EGDMA) crosslinker and methacrylic acid (MAA) for the preparation of polymer core and third‐layer as well as the controlled sol‐gel hydrolysis of inorganic precursors for the construction of zirconium hydroxide (Zr(OH)₄) and titania (TiO₂) layers. The thicknesses of zirconia and titania shell‐layers were conveniently controlled via varying the feed of zirconium n‐butoxide (Zr(OBu)₄) and titanium tetrabutoxide (TBOT) during the sol‐gel hydrolysis, while the sizes of polymer layers were tuned through a multi‐stage distillation precipitation copolymerization. The structure and morphology of the resultant microspheres were characterized by transmission electron microscopy (TEM), X‐ray diffractometer (XRD), X‐ray photoelectronic spectroscopy (XPS), and thermogrametric analysis (TGA).     

Design and Synthesis of Polyoxazole‐based Macrocycles Tethered with a Phosphonate Group

We present the design and synthesis of polyoxazole‐based macrocycles containing a phosphonate group. A reliable route was established that allows for convenient and versatile incorporation of various phosphonate functionalities such as phosphonate ester, acid, and salt at the macrocyclic ring periphery. Such unprecedented macrocyclic compounds are anticipated to be appealing candidates as telomerase inhibitors.     

吸附树脂分离纯化枇杷花总黄酮的研究

比较了D-101、D-160、AB-8、NKA-9和聚酰胺等5种吸附树脂对枇杷花总黄酮的吸附及解吸附性能。在静态吸附和动态吸附实验基础上,筛选出效果较好的AB-8树脂进行动态吸附参数的研究。考察了样品液pH值、样品液浓度、洗脱液浓度、上样速度、洗脱速度等对AB-8树脂吸附和解吸效果的影响,确定了AB-8树脂动态吸附枇杷花总黄酮的最佳条件。获得的最佳纯化条件如下,样品液pH值为5.5,样品液浓度为12mg/mL,洗脱液为30%的乙醇水溶液,上样速度为2BV/h,洗脱速度为1BV/h。纯化后样品总黄酮含量达86.7%,比纯化前总黄酮含量高5~6倍。实验结果表明,AB-8树脂可用于分离纯化枇杷花总黄酮。     

Ring Opening of N‐Sulfonyl Aziridines by Amines in Silica‐Water

Ring opening reactions of N‐sulfonyl aziridines by primary and secondary amines in silica gel (SG)‐water system were achieved, which provided a mild, practical and environmentally benign method to synthesize mono‐ and bis‐sulfonyl substituted amines. When primary and secondary amines were used in excess, they reacted with N‐sulfonyl aziridines smoothly at room temperature, mainly affording 1:1 ring opening products. Reactions of primary amines with 2 equiv. of aziridines produced 2:1 ring opening products. Some 1:1 products can be cyclized with CS₂ to synthesize N‐sulfonyl cyclothioureas also in water.     

Turn-on fluorescence sensing of cyanide ions in aqueous solution简

A sensitive fluorescent probe, 2,2＇-bisbenzimidazole （L）, for CN has been developed. This structurally simple receptor displays great selectivity for the cyanide anion over other common inorganic anions in an aqueous environment. In addition, further study demonstrates the lower detection of the fluorescence response of the sensor to CN is in 10 9 mol/L range. Thus, the present probe should be applicable as a practical system for the monitoring of cyanide concentrations in aqueous samples.     

Perfluorinated compounds in blood of textile workers and barbers

12 perfluorinated compounds（PFCs） in human blood from workers in a textile mill in Shandong province and several barbershops in Tianjin were analyzed in this study. It was found that perfluorooctanesulfonate（PFOS） and perfluorooctanoate（PFOA） were the most prominent PFCs, with average concentrations of 5.73 mg/L and 5.46 mg/L for textile workers, and 2.55 mg/L and 2.84 mg/L for barbers.PFOS and perfluorohexanesulfonate（PFHxS） concentrations revealed a positive correlation in blood samples（p 〈 0.01）, and concentrations among PFOS, perfluorononanoic acid（PFNA） and perfluorodecanoic acid（PFDA） also revealed positive correlations（p 〈 0.01）. The influence of gender and age on PFC concentration in blood was also investigated, and the results showed that there was no statistically significant difference between the male and female samples, as well as in samples from people with different ages. Generally speaking, the textile workers     

A novel method for the synthesis of sulfur substituted-cyclopyrophosphate of cADPR analogs

A facile and efficient protocol for the synthesis of sulfur substituted-cyclopyrophosphate of cIDPRE(P_S~1-cIDPRE) was developed.The key step was the cyclization process which was completed by the sulfur substituted cyclization precursor 1b via the one-pot phosphoramidite strategy.