铅锌矿中硫的相态分析

建立了铅锌矿中硫的相态分析的方法,包括自然状态硫、硫酸根态硫和全硫的分析方法。采用非连续浸提的方法用Na2SO3溶液将自然硫浸出,Na2CO3溶液将SO2-4浸出,并分别用碘量法和BaSO4重量法进行测定,总硫以碳硫分析仪定量测定,还原态硫由差减法得到。对选用的铅锌矿中的硫进行了形态分析,通过加标回收考察方法的准确度,各形态硫的加标回收率均在95%左右,符合常量和痕量分析的要求。     

深圳南山托幼机构状况调查

报道了深圳市南山区开展社区卫生保健以来，对三所托幼机构状况的全面调查，调查内容包括：托幼机构性质及各类结构，落实执行卫生保健隔离消毒制度，儿童户内外活动面积和膳食进餐等情况，指出所存在的问题。     

Study of low momentum track reconstruction for the BESⅢ main drift chamber

In order to overcome the difficulty brought by the circling charged tracks with transverse momentum less than 120 MeV in the BESⅢ Main Drift Chamber(MDC),a specialized method called TCurlFinder was developed.This tracking method focuses on the charged track reconstruction under 120 MeV and possesses a special mechanism to reject background noise hits.The performance of the package has been carefully checked and tuned by both Monte Carlo data and real data.The study shows that this tracking method could obviously enhance the reconstruction efficiency in the low transverse momentum region,providing physics analysis with more and reliable data.     

Robustness of Cooperation on Highly Clustered Scale-Free Networks

We study the effect of mutation on the evolutionary prisoner＇s dilemma in highly clustered scale-free networks. It is found that cooperation is more sensitive and vulnerable to strategy mutation in more highly clustered networks. For small mutation rates, high clustering coefficient promotes cooperation. For medium mutation rates, high clustering coefficient inhibits the emergence of cooperation. For large mutation rates, cooperation is insensitive to clustering property. We provide explanations for the effects of clustering on cooperation with varied mutation rates.     

氯醚橡胶的合成催化剂体系及应用的研究进展

氯醚橡胶的问世较早,由于其具有优异的性能使其迅速的发展,已经在汽车、电子及航空航天等领域得到广泛应用。近几年,其独特的导电性在办公自动化机器上的广泛应用而成为研究热点。本文从氯醚橡胶的分子结构入手,分析了各种类型氯醚橡胶的结构性能与应用状况并简单解释了橡胶导电的机理;综述了氯醚橡胶的研究现状,着重分析比较了合成氯醚橡胶的各种催化体系的组成、特点及研究进展,并在此基础上对氯醚橡胶发展前景进行了展望。     

层次分析中混合最小二乘法的收敛性迭代算法

混合最小二乘法是层次 的一种排序方法，它是由陈宝廉在文[1]中提出的。西文给出了此排序方法的一个收敛性迭代算法，并进行了算例分析。     

离子液体增塑生物基聚丁内酰胺的热分解机理

采用疏水性1-丁基-3-甲基咪唑六氟磷酸盐([BMIM]PF₆)和亲水性1-丁基-3-甲基咪唑四氟硼酸盐 ([BMIM]BF₄)两种咪唑类离子液体(IL)增塑聚丁内酰胺(PBL), 探讨了IL对PBL结晶性能及热性能的影响. 研究发现, 两种IL都会削弱PBL分子间氢键, 并抑制PBL晶体在(200)晶面的生长, 降低PBL结晶度. 当IL添加质量分数为5%时, 增塑膜熔点下降7~8 ℃. 与纯PBL膜相比, [BMIM]BF₄增塑PBL膜热稳定性下降, 而[BMIM]PF₆增塑PBL膜的热稳定性提高. [BMIM]PF₆增塑PBL膜热分解过程的热动力学分析结果表明, 其热分解反应活化能为46.68 kJ/mol, 反应级数为1, 热分解最概然机理函数模型符合Mampel单行法则(一级), 即PBL受到热刺激后, 在聚合物和分解产物界面无规律成核, 反应核心具备反应活性, 随后反应逐步扩大, 直至结束.     

Functionalized Hierarchical ZSM-5 Zeolites for the Viscosity Reduction of Heavy Oil at Low Temperature

Herein, we propose a novel approach to reduce the viscosity of heavy oil by functional hierarchical CTMS-ZSM-5-PTMS zeolites. CTMS-ZSM-5-PTMS zeolites synthesized by asymmetric modification and selective alkali etching can reduce the viscosity of heavy oil through adsorbing asphaltenes. This method can reduce the viscosity of heavy oil from hundreds of thousands mPa·s to about ten thousand mPa·s. The work provides an economical and environmentally friendly candidate for heavy oil viscosity reduction under low-temperature conditions.     

A Two-dimensional Covalent Organic Framework for Iodine Adsorption

Radioactive iodine is a notorious pollutant in gas radioactive nuclear waste due to its radiation hazard, volatility, chemical toxicity, and high mobility. Therefore, developing a material with high efficiency-specific iodine capture is significant. Covalent organic framework(COF) has attracted significant attention as a new crystalline porous organic material. Due to its large specific surface and high chemical stability, it is an excellent alternative to adsorbents. Herein, we report a chemically stable two-dimensional COF(termed JUC-609) with specific adsorption of iodine. Adsorption experiments show that JUC-609 has an excellent iodine adsorption capacity as high as 5.9 g/g under 353 K and normal pressure condition, and iodine adsorption after multiple cycles is still maintained. Our study thus promotes the potential application of COFs in the field of environment-related applications.     

铀元素的激光诱导击穿光谱测量分析

为促进LIBS技术在微量重金属元素检测以及核污染检测领域的应用,提高检测灵敏度和准确性,采用了激光双脉冲LIBS技术和光电双脉冲LIBS技术,分别对土壤和二氧化硅中的铀元素进行分析。首先,对激光脉冲能量、电压和采集延时等参数进行优化,提高铀元素特征谱线的强度和信噪比;然后在优化实验参数条件下,对含不同浓度铀元素的土壤样品和二氧化硅样品进行激发;选取UII 367.01 nm、 UII 454.36 nm两条铀元素的特征谱线作为分析线,通过铀元素浓度与特征谱线强度的线性关系,建立定标曲线。双脉冲激光激发条件为：激光脉冲1作为预脉冲,主要参数为1 064 nm, 90 mJ, 9.2 ns,激光脉冲2作为再加热脉冲,主要参数为355 nm, 50 mJ, 8 ns,两个脉冲的时间间隔800 ns,光谱采集相对第二个脉冲延时1μs,得到铀元素在土壤和二氧化硅两种样品中的浓度检测下限分别为572和110 mg·kg^-1,拟合优度值R²分别为0.958和0.999。在光电双脉冲激发条件下,激光脉冲作为预脉冲,主要参数为355 nm, 50 mJ, 8 ...