Studies on the extraction behaviour of plutonium(IV) from mixed aqueous-organic media with sulphoxides

Extraction behaviour of plutonium (IV) from nitric acid media by two long-chain aliphatic sulphoxides, namely, di-n-hexylsulphoxide and di-n-octylsulphoxide has been investigated in the presence of several water-miscible organic solvents to study their possible synergistic effect on metal ion extraction. Methanol, ethanol, n-and iso-propanol, dioxane, acetone as well as as acetonitrile were used as the organic component of the mixed (polar) phase. These additives affected the extraction to varying degrees. Thus, extractability of Pu increases 2–3 fold with increasing concentration (upto 20%) of acetonitrile, acetone, methanol and ethanol while it decreases with increasing concentration of n-and isopropanol. At high concentration of the former, synergism changes into antagonism. Possible reasons for such behaviour are briefly discussed. Among these organic additives, maximum enhancement in the extraction of Pu(IV) was observed in the presence of acetonitrile. The relative increase in extraction was found to be more at lower sulphoxide concentrations.     

Facilitated phosphatidylserine flip-flop across vesicle and cell membranes using urea-derived synthetic translocases

Tris(2-aminoethyl)amine derivatives with appended urea and sulfonamide groups are shown to facilitate the translocation of fluorescent phospholipid probes and endogenous phosphatidylserine across vesicle and erythrocyte cell membranes. The synthetic translocases appear to operate by binding to the phospholipid head groups and forming lipophilic supramolecular complexes which diffuse through the non-polar interior of the bilayer membrane.     

Aqueous polymerization of methacrylamide

The aqueous polymerization of methacrylamide (I) initiated by KBrO₃–thioglycolic acid (TGA) has been studied at 30 ± 0.2°C in nitrogen. The rate is given by K[M]^1.19 [thioglycolic acid]¹ [KBrO₃]^0.53 for 10–15% conversion. Activation energy was found to be 53.96 kJ/mole (12.92 kcal/mole) in the investigated range of temperature 30–45°C. The role of addition of a series of aliphatic alcohols and some salts was also determined. The kinetics of polymerization was followed iodometrically.     

Studies on polymerization of vinyl acetate using ylide as an initiator and degradative transfer agent

Polymerization of vinyl acetate initiated by β-picolinium p-chlorophenacylide was carried out at 30, 35, and 40°C, using conventional dilatometric technique. The initiator and the monomer exponent values were 0.80 ± 0.15 and unity, respectively. The polymerization was inhibited in the presence of hydroquinone, but was favored by nonpolar solvent and polymerization temperature. The energy of activation was 90.3 KJ mol^?1. An average value of k/k_t for the present system was found to be 0.37 × 10^?2. The results are explained in terms of a radical mode of polymerization with degradative initiator transfer; the principal mode of termination, however, was bimolecular.     

A convenient synthesis of linear pyranocoumarins. Xanthyletin and 3-Phenylxanthyletin

A convenient synthesis of linear pyranocoumarins, viz., 8,8-dimethyl-2H,8H-benzo[1,2-b; 5,4-b]dipyran-2-one (xanthyletin,1) and 8,8-dimethyl-3-phenyl-2H,8H-benzo[1,2-b; 5,4-b]dipyran-2-one (3-phenylxanthyletin,2) is described. The key steps are blocking the 8-position of appropriate 7-hydroxy-2H-1-benzopyran-2-one derivatives with iodine and 1,1-dimethyl-2-propynylation followed by cyclisation.

---

Ein einfacher Syntheseweg zu linearen Pyranocumarinen. Xanthyletin und 3-Phenylxanthyletin

Zusammenfassung Es wird ein vorteilhafter Weg zur Synthese von linearen Pyranocumarinen am Beispiel von Xanthyletin und 3-Phenylxanthyletin gezeigt. Das Syntheseprinzip besteht in einer Blockierung der 8-Position des entsprechenden 7-Hydroxy-2H-1-benzopyran-2-ons mit Jod und einer 1,1-Dimethyl-2-propinylierung mit nachfolgender Cyclisierung.

     

Is collision-induced dissociation of low-energy carbonyl sulfide cations adversely affected by asymmetry?

We have measured relative abundances of fragment ions resulting from collision-induced dissociation of OCS(+) ions in collision with xenon neutrals as a function of ion kinetic energy and scattering angle. The lowest energy dissociation product, S(+), dominates at all energies up to 53 eV kinetic energy studied here. Surprisingly, the second most abundant dissociation channel is CS(+) and not CO(+) even though the thermochemical threshold for CO(+) is lower than that for CS(+) and CO(+) is more abundant than CS(+) in the normal mass spectrum of OCS. We do not observe any significant abundance of CO(+) in this energy range, suggesting that collision-induced excitation and dissociation of OCS(+) is significantly different to that of symmetric triatomic ions. A possible role of asymmetry in the molecular ion's collisional activation via neutral collision is suggested for the different behavior.     

A Two‐Dimensional Coordination Compound as a Zinc Ion Selective Luminescent Probe for Biological Applications

A 2D coordination compound {[Cu₂(HL)(N₃)]?ClO₄}_∞ ( 1 ; H₃L=2,6‐bis(hydroxyethyliminoethyl)‐4‐methyl phenol) was synthesized and characterized by single‐crystal X‐ray diffraction to be a polymer in the crystalline state. Each [Cu₂(HL)(N₃)]⁺ species is connected to its adjacent unit by a bridging alkoxide oxygen atom of the ligand to form a helical propagation along the crystallographic a axis. The adjacent helical frameworks are connected by a ligand alcoholic oxygen atom along the crystallographic b axis to produce pleated 2D sheets. In solution, 1 dissociates into [Cu₂(HL)₂(H₃L)]?2H₂O ( 2 ); the monomer displays high selectivity for Zn²⁺ and can be used in HEPES buffer (pH 7.4) as a zinc ion selective luminescent probe for biological application. The system shows a nearly 19‐fold Zn²⁺‐selective chelation‐enhanced fluorescence response in the working buffer. Application of 2 to cultured living cells (B16F10 mouse melanoma and A375 human melanoma) and rat hippocampal slices was also studied by fluorescence microscopy.     

Importance of micellar kinetics in relation to technological processes

The association of many classes of surface-active molecules into micellar aggregates is a well-known phenomenon. Micelles are in dynamic equilibrium, constantly disintegrating and reforming. This relaxation process is characterized by the slow micellar relaxation time constant, tau(2), which is directly related to the micellar stability. Theories of the kinetics of micelle formation and disintegration have been discussed to identify the gaps in our complete understanding of this kinetic process. The micellar stability of sodium dodecyl sulfate micelles has been shown to significantly influence technological processes involving a rapid increase in interfacial area, such as foaming, wetting, emulsification, solubilization, and detergency. First, the available monomers adsorb onto the freshly created interface. Then, additional monomers must be provided by the breakup of micelles. Especially when the free monomer concentration is low, which is the case for many nonionic surfactant solutions, the micellar breakup time is a rate-limiting step in the supply of monomers. The Center for Surface Science & Engineering at the University of Florida has developed methods using stopped flow and pressure jump with optical detection to determine the slow relaxation time of micelles of nonionic surfactants. The results showed that the ionic surfactants such as SDS exhibit slow relaxation times in the range from milliseconds to seconds, whereas nonionic surfactants exhibit slow relaxation times in the range from seconds (for Triton X-100) to minutes (for polyoxyethylene alkyl ethers). The slow relaxation times are much longer for nonionic surfactants than for ionic surfactants, because of the absence of ionic repulsion between the head groups. The observed relaxation times showed a direct correlation with dynamic surface tension and foaming experiments. In conclusion, relaxation time data of surfactant solutions correlate with the dynamic properties of the micellar solutions. Moreover, the results suggest that appropriate micelles with specific stability or tau(2) can be designed by controlling the surfactant structure, concentration, and physicochemical conditions (e.g., salt concentration, temperature, and pressure). One can also tailor micelles by mixing anionic/cationic or ionic/nonionic surfactants for a desired stability to control various technological processes.     

Diffusion behavior of pharmaceutical O/W microemulsions studied by dynamic light scattering

Dynamic light scattering experiments have been performed at various concentrations, of pharmaceutical oil-in-water microemulsions consisting of Eutanol G as oil, a blend of a high (Tagat O2) and a low (Poloxamer 331) hydrophilic–lipophilic balance surfactant, and a hydrophilic phase (propylene glycol/water). We probe the dynamics of these microemulsions by dynamic light scattering. In the measured concentration range, two modes of relaxation were observed. The faster decaying mode is ascribed classically to the collective diffusion D _c (total droplet number density fluctuation). We show that the slow mode is also diffusive and suggest that its possible origin is the relaxation of polydispersity fluctuations. The diffusion coefficient associated with this mode is then the self-diffusion D _s of the droplets. It was found that D _c and D _s had opposite volume fractions of oil plus surfactants (ϕ) dependence and a common limiting value D ₀ for ϕ=0. Average hydrodynamic radius (R _h=10.5 nm) of droplets was calculated from D ₀. R _h is supposed to compose the inner core, a surfactant film including possible solvent molecules, which migrate with the droplet. The concentration dependence of diffusion coefficients reflects the effect of hard sphere and the supplementary repulsive interactions which arises due to loss of entropy, when absorbed chains of surfactant intermingle on the close approach of the two droplets. This mechanism could also explain the observed stability of our systems. The estimated extent of polydispersity is 0.22 from the amplitude of slower decaying mode. The polydispersity in microemulsion systems is dynamic in origin. Results indicate that the time scale for local polydispersity fluctuations is at least three orders of magnitude longer than the estimated time between droplet collisions.     

Biligand metal chelates of 1,10-phenanthroline and several salicyclic acid derivatives in solution

Summary Mixed ligand complexes of copper(II), zinc(II), nickel(II) and cobalt(II) ions involving 1,10-phenanthroline (phen) as primary and 3,5-dinitrosalicylic acid (dnsa), 5-nitrosalicylic acid (nsa), 5-chlorosalicylic acid (csa) and 3,5-dibromosalicylic acid (dbsa) as secondary ligands in solution have been investigated potentiometrically [25°, µ = 0.1 M [NaClO₄], medium 50% v: v aqueous ethanol]. The stability order of mixed ligand complexes with respect to the metal ions obeys the natural order: cobalt(II) < nickel(II) < copper(II) > zinc(II). The stabilities of the heterometal chelates have been compared with the corresponding homometal chelates of the secondary ligands and have been interpreted in terms of metal-ligand effects and coulombic interactions between various ligand anion species present.