Two new marine sediment standard reference materials (SRMs) for the determination of organic contaminants

Two new marine sediment standard reference materials (SRMs), SRM 1941b Organics in Marine Sediment and SRM 1944 New York/New Jersey Waterway Sediment, have been recently issued by the National Institute of Standards and Technology (NIST) for the determination of organic contaminants including polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyl (PCB) congeners, and chlorinated pesticides. Both sediment SRMs were analyzed using multiple analytical methods including gas chromatography/mass spectrometry (GC/MS) on columns with different selectivity, reversed-phase liquid chromatography with fluorescence detection (for PAHs only), and GC with electron capture detection (for PCBs and pesticides only). SRM 1941b has certified concentrations for 24 PAHs, 29 PCB congeners, and 7 pesticides, and SRM 1944 has certified concentrations for 24 PAHs, 29 PCB congeners, and 4 pesticides. Reference concentrations are also provided for an additional 58 (SRM 1941b) and 39 (SRM 1944) PAHs, PCB congeners, and pesticides. SRM 1944, which was collected from multiple sites within New York/New Jersey coastal waterways, has contaminant concentrations that are generally a factor of 10–20 greater than SRM 1941b, which was collected in the Baltimore (Maryland) harbor. These two SRMs represent the most extensively characterized marine sediment certified reference materials available for the determination of organic contaminants.Electronic Supplementary Material Supplementary material is available in the online version of this article at . A link in the frame on the left on that page takes you directly to the supplementary material.     

Symmetric inertial-confinement-fusion-capsule implosions in a double-z-pinch-driven hohlraum

An inertial-confinement-fusion (ICF) concept using two 60-MA Z pinches to drive a cylindrical hohlraum to 220 eV has been recently proposed. The first capsule implosions relevant to this concept have been performed at the same physical scale with a lower 20-MA current, yielding a 70+/-5 eV capsule drive. The capsule shell shape implies a polar radiation symmetry, the first high-accuracy measurement of this type in a pulsed-power-driven ICF configuration, within a factor of 1.6-4 of that required for scaling to ignition. The convergence ratio of 14-21 is to date the highest in any pulsed-power ICF system.     

Broken symmetries and pattern formation in two-frequency forced faraday waves

We exploit the approximate (broken) symmetries of time translation, time reversal, and Hamiltonian structure to obtain general scaling laws governing the process of pattern formation in weakly damped Faraday waves. Using explicit parameter symmetries we determine, for the case of two-frequency forcing, how the strength of observed three-wave interactions depends on the frequency ratio and on the relative phase of the two driving terms. These symmetry-based predictions are verified for numerically calculated coefficients, and help explain the results of recent experiments.     

A numerical method for acoustic normal modes for shear flows

The normal modes and their propagation numbers for acoustic propagation in wave guides with flow are the eigenvectors and eigenvalues of a boundary value problem for a non-standard Sturm-Liouville problem. It is non-standard because it depends non-linearly on the eigenvalue parameter. (In the classical problem for ducts with no flow, the problem depends linearly on the eigenvalue parameter.) In this paper a method is presented for the fast numerical solution of this problem. It is a generalization of a method that was developed for the classical problem. A finite difference method is employed that combines well known numerical techniques and a generalization of the Sturm sequence method to solve the resulting algebraic eigenvalue problem. Then a modified Richardson extrapolation method is used that dramatically increases the accuracy of the computed eigenvalues. The method is then applied to two problems. They correspond to acoustic propagation in the ocean in the presence of a current, and to acoustic propagation in shear layers over flat plates.     

Excited states in the photochemistry of chromium(III) complexes

Experimental data for chromium(III) complex ions on the spectroscopic properties, photoreactions, and intermolecular energy transfer are analyzed in terms of the primary photophysical and photochemical processes. It is suggested that the lowest excited quartet state,⁴T_2g inO _h symmetry, is the immediate precursor to photoaquation and that the lowest doublet state,²E, is substitution inert except via the⁴ T _2g state reached by back intersystem crossing.

---

Zusammenfassung Experimentelle Daten von Chrom-(III)-Komplex-Ionen in bezug auf spektroskopische Eigenschaften, Photoreaktionen und intermolekularen Energieübertragung wurden mit dem Begriffssystem der photophysikalischen und photochemischen Primärprozesse analysiert. Und zwar wird vorgeschlagen, daß der tiefste angeregte Quartettzustand,⁴ T _2g inO _h -Symmetrie, der unmittelbare Vorläufer der Photoaquatisierung ist und daß der tiefste Doublettzustand,²E, inert gegenüber Substitutionen ist, außer über den⁴ T _2g Zustand, wenn er durch Re-intersystem crossing erreicht wird.

---

---

Dedicated to the memory of Professor Hans-Ludwig Schläfer.     

Steady-state and dynamic rheology of poly(1-olefin) melts

The steady-state and dynamic melt rheology for a series of poly(1-olefins) has been investigated. The series includes poly(1-butene), poly(1-hexene), poly(1-heptene), poly(1-octene), Poly(1-undecene), poly(1-tridecene), poly(1-hexadecene), and poly(1-octadecene). The flow behavior was investigated by use of a Weissenberg rheogoniometer. Measurements on poly(1-butene) were also made using an Instron capillary rheometer. The empirical relationship developed by Cox and Merz was obeyed for the entire series of poly(1-olefins) at all temperatures investigated. Graessley's theory was used to calculate the flow curves for the poly(1-olefins) from the measured molecular weight distributions. The purpose was to investigate the effect of polymer composition on the shear rate dependence of viscosity. It was found that all experimental flow curves except those for poly(1-hexene) can be fitted with the calculated curves from the individual molecular weight distributions. The conclusion is made that flow curves of poly(1-olefins) depend predominately on molecular weight distribution and are essentially independent of side-chain length even for poly(1-olefins) with pendant groups as long as 16 carbon atoms. The low-shear limiting Newtonian viscosity η₀ for all poly(1-olefins) was expressed by, η₀ = KM? or by η₀ = K′P? where M?_w is the weight-average molecular weight and P?_w is the weight-average degree of polymerization. The K and K′ values obtained decrease systematically as the side chain is increased.     

The effect of anhydrous ammonia on the crystalline-state deformation of nylons 6 and 6,6

The aliphatic polyamides nylon 6 and 6,6 have been cold drawn by using the new concept of reversible plasticization with NH₃. Two aspects were investigated: the effect of NH₃ plasticization on the stress-strain behavior of nylon 6,6, and the extent of NH₃ absorption as determined by x-ray analysis for the structurally simpler nylon 6. X-ray analysis shows that ammonia is absorbed preferentially by the amorphous phase and that the plasticization has a significant effect on the unit-cell orientation, the small-angle void scattering, and the interplanar spacings between sheets of hydrogen-bonded chains. The effect of plasticization was seen in the lower yield stress, the higher draw ratio (up to 8X) and tensile modulus (10 GPa) not attainable with unplasticized specimens.