Modelling the surface free energy parameters of polyurethane coats—part 2. Waterborne coats obtained from cationomer polyurethanes

Polyurethane cationomer coats were synthesised on the basis of typical diisocyanates, properly selected polyether polyols, HO-tertiary amines and HCOOH as quaternisation reagents. The values of their surface free energy (SFE) parameters were obtained by the van Oss-Good method, with the use of the contact angle values which had been found by the goniometric method. Based on the obtained findings, empirical models were developed which made it possible to anticipate the effects of the raw material types on the SFE values of the produced coats. The possibility was noted to adjust the SFE values within 25–50 mJ/m² by selecting carefully suitable parent substances. The principal consequences for the formation of improved hydrophobicity coats, applicable inter alia specialised protective coatings, were found to come not only from diisocyanate and polyol types but also from the alkylammonium cation structure which results from the use of different tertiary amines. The fundamental SFE lowering effect was noted when tertiary amines with 0–15 % of the 2,2,3,3-tetrafluoro-1,4-butanediol as a fluorinated chain extender was incorporated into polymer chains.     

SIMS accurate determination of matrix composition of topological crystalline insulator material Pb1 − xSnxSe

Substitutional alloy Pb_1 − xSn_xSe is a new class of electronic materials called topological crystalline insulators, which at the temperature range from 0 K to 300 K exhibit topological state at compositions in the range 0.18 < x < 0.40 (in the rock-salt structure). In this report, we present a secondary ion mass spectrometry (SIMS) analysis technique to provide accurate Pb and Sn composition based on the measurement of PbCs⁺ and SnCs⁺ cluster ions intensities. Studies of Pb_1 − xSn_xSe bulk samples with various values of x show that x/(1 − x) is linear in relation to the intensity ratio of PbCs⁺/SnCs⁺ over the range from x = 0.15 to x = 0.41. This technique allows us to obtain an accurate Sn content for multilayered heterostructures, quantum wells containing Pb_1 − xSn_xSe with different x values for each layer.     

The Identification of Cotton Fibers Dyed with Reactive Dyes for Forensic Purposes

Some of the most common microtraces that are currently collected at crime scenes are fragments of single fibers. The perpetrator leaves them at a crime scene or takes them away, for example, on their clothing or body. In turn, the microscopic dimensions of such traces mean that the perpetrator does not notice them and therefore usually does not take action to remove them. Cotton and polyester fibers dyed by reactive and dispersion dyes, respectively, are very popular within clothing products, and they are hidden among microtraces at the scene of a crime. In our recently published review paper, we summarized the possibilities for the identification of disperse dyes of polyester fibers for forensic purposes. In this review, we are concerned with cotton fibers dyed with reactive dyes. Cotton fibers are natural ones that cannot easily be distinguished on the basis of morphological features. Consequently, their color and consequently the dye composition are often their only characteristics. The presented methods for the identification of reactive dyes could be very interesting not only for forensic laboratories, but also for scientists working in food, cosmetics or pharmaceutical/medical sciences.     

The Effect of the Modification of Carbon Spheres with ZnCl2 on the Adsorption Properties towards CO2

Zinc chloride and potassium oxalate are often applied as activating agents for carbon materials. In this work, we present the preparation of ZnO/carbon spheres composites using resorcinol-formaldehyde resin as a carbon source in a solvothermal reactor heated with microwaves. Zinc chloride as a zinc oxide source and potassium oxalate as an activating agent were applied. The effect of their addition and preparation conditions on the adsorption properties towards carbon dioxide at 0 °C and 25 °C were investigated. Additionally, for all tested sorbents, the CO₂ sorption tests at 40 °C, carried out utilizing a thermobalance, confirmed the trend of sorption capacity measured at 0 and 25 °C. Furthermore, the sample activated using potassium oxalate and modified using zinc chloride (a carbon-to-zinc ratio equal to 10:1) displayed not only a high CO₂ adsorption capacity (2.69 mmol CO₂/g at 40 °C) but also exhibited a stable performance during the consecutive multicycle adsorption–desorption process.     

Tungsten and Molybdenum Heteropolyanions with Different Central Ions—Correlation between Theory and Experiment

Density functional theory calculations were carried out to investigate the electronic structures of Keggin-typed [XMo₁₂O₄₀]ⁿ⁻ and [XW₁₂O₄₀]ⁿ⁻ anions with different heteroatoms (X = Zn²⁺, B³⁺, Al³⁺, Ga³⁺, Si⁴⁺, Ge⁴⁺, P⁵⁺, As⁵⁺, and S⁶⁺). The influence of solvent on redox properties of heteropolyanions was discussed. For [XW₁₂O₄₀]ⁿ⁻ systems two linear correlation: first, between the experimental redox potential and energies of LUMO orbital; and second, between the experimental redox potential and total energy interaction (calculated between internal tetrahedron (XO₄ⁿ⁻), and rest of Kegging anion skeleton, (W₁₂O₃₆)) were designated. Taking into account the similarity of XW₁₂O₄₀ⁿ⁻ and XMo₁₂O₄₀ⁿ⁻ systems (in geometry and electronic structure), the estimated redox potential of molybdenum heteropolyanions (with X being p block elements) in different solvent were proposed.     

Stereochemistry of the reaction of ribonucleoside cyclic 3′,5′-phosphorothioates with oxiranes

The stereochemical course of the epoxide-induced oxidative rearrangement of ribonucleoside cyclic 3′,5′-phosphorothioates into the corresponding 2′,3′-phosphates has been determined using styrene [¹⁸O] oxide and (S_p)-uridine cyclic 3′,5′-phosphorothioate. The evidence of full stereoselectivity of this reaction is presented and mechanistic implications of the presence of the nucleoside 2′-hydroxyl group are discussed in terms of a classical Hamer Mechanism.     

Barrier Dispersion-Based Coatings Containing Natural and Paraffin Waxes

Petroleum, synthetic, and natural waxes have been used as hydrophobic bases for dispersions intended for use as barrier coatings for packaging paper. Oil-in-water dispersions with alkaline pH were prepared by a two-step homogenization procedure containing paraffin wax, with various characteristics, the Fischer–Tropsch synthesis product or beeswax. The size of the dispersed particles determined by dynamic light scattering depended on the type of hydrophobic base used and was in the range of 350–440 nm. The ability of dispersion particles in aggregation driven by electrostatic attraction, evaluated by Zeta potential analysis by electrophoretic light scattering, was from −26 to −50 mV. Static multiply light scattering was used for 30 days of stability assessment and helped to select the dispersion with a Sarawax SX70 wax base as the most stable. Dispersions were further used for coating the backing of kraft paper by the Meyer rod method. Coated paper with an applied coating of 6 g/m² had very good hydrophobic properties (Cobb60 < 4 g/m²), sufficient strength properties, and air permeation, which enabled its application as a packaging material. The dispersions based on Sarawax SX70 wax were evaluated as the best coating for Mondi ProVantage Kraftliner 125 g/m² backing paper. Good hydrophobic properties and strength properties indicate the possibility of using the SX70-based wax dispersion coating as a replacement for PFAS coatings in some applications.     

Anionic polymerization of β-lactones initiated with potassium hydride. A convenient route to polyester macromonomers

The anionic polymerization of 2-oxetanone and 4-methyl-2-oxetanone initiated with the potassium hydride/18-crown-6 complex was investigated. The α-proton abstraction of the monomer was found to proceed at the initiation step of this polymerization. The salt of the unsaturated carboxylic acid formed initiates further propagation, leading to functionalized polyesters with unsaturated, dead end-groups.