Comparative efficacy of Eucalyptus globulus (Labill) hydrodistilled essential oil and temephos as mosquito larvicide

Abstract

In this study Eucalyptus globulus essential oil was tested on major mosquito species and toxicity was compared with temephos. Mortality was calculated after 24?h and 48?h post treatment. In 24?h treatment essential oil show strong larvicidal activity with LC₅₀ and LC₉₀ values were 30.198ppm, 103.389ppm for Anopheles stephensi, 13.578ppm, 106.755ppm for Aedes aegypti; and, 7.469ppm, 32.454ppm for Culex quinquefasciatus and 48?h post treatment LC₅₀ and LC₉₀ values were, 12.576, 49.380ppm for Anopheles stephensi, 7.926, 34.470ppm for Aedes aegypti and 4.408, 21.048ppm for Culex quinquefasciatus. Chemical composition of essential oil using GC-MS and FT-IR analysis shows the presence of 1,8-cineol, (71.7%); α-pinene, (9.14%) as a major compounds. Our findings suggest that essential oil from Eucalyptus globulus leaves can be used for control of mosquito larvae.     

金催化的环化反应与钯催化的炔醇偶联/环化反应相结合用于合成多取代呋喃衍生物:串联反应的应用范围(英文)

开发了一种由金和钯催化π-活化由炔醇合成呋喃衍生物的集成方法.该合成策略是最显著的特点适用于带环辛基的底物,其适用范围比之前报道的有很大扩展.在Sonogashira反应条件下,由相应底物可直接得到环辛基呋喃.Pd在这些反应中起到2个重要作用:底物发生偶联反应的关键催化剂;通过π-活化促进炔醇中间体成环反应.该方法在一步合成3-碘呋喃反应中作用很突出,使通过偶联法进一步官能团化成为可能.我们还将AuBr_3用于多米诺成环/C-H键活化反应和无环前体的成环反应.本文结果表明,在该类成环反应中金和钯催化剂相辅相成.     

Experimental and Theoretical Insights into the Optical Properties and Intermolecular Interactions in Push-Pull Bromide Salts

Experimental and theoretical insights into the nature of intermolecular interactions and their effect on optical properties of 1-allyl-4-(1-cyano-2-(4-dialkylaminophenyl)vinyl)pyridin-1-ium bromide salts ( I and II ) are reported. A comparison of optical properties in solution and in the solid-state of the salts ( I and II ) with their precursors ( Ia and IIa ) is made. The experimental absorption maxima (λ_max) in CHCl₃ is at 528 nm for I and at 542 nm for II , and a strong bathochromic shift of ∼110 nm is observed for salts I and II compared with their precursors. The absorption bands in solid-state at ∼627 nm for I and at ∼615 nm for II that are assigned to charge transfer (CT) effect. The optical properties and single crystal structural features of I and II are explored by experimental and computational tools. The calculated λ_max and the CT are in good agreement with the experimental results. The intermolecular interactions existing in the crystal structures and their energies are quantified for various dimers by PIXEL, QTAIM and DFT approaches. Three types of interactions, (i) the cation⋅⋅⋅cation interactions, (ii) cation⋅⋅⋅anion interactions and (iii) anion⋅⋅⋅anion interactions are observed. The cationic moiety is mainly destabilized by C−H⋅⋅⋅N/π and π⋅⋅⋅π interactions whereas the cation and anion moiety is predominantly stabilized by strong C−H⋅⋅⋅Br⁻ interactions in both structures. The existence of charge transfer between cation and anion moieties in these structures is established through NBO analysis.     

NO2 sensing properties of YSZ-based sensor using NiO and Cr-doped NiO sensing electrodes at high temperature

Nickel oxide and chromium-doped nickel oxide (Ni_0.95Cr_0.03O_1−δ ) were prepared by thermal decomposition of nitrates. The obtained NiO and Ni_0.95Cr_0.03O_1−δ samples were utilized as sensing electrodes (SEs) in yttria-stabilized zirconia (YSZ)-based sensors for detection of NO₂ at 800 °C under wet condition (5 vol.% H₂O). While the mixed-potential-type planar sensor attached with NiO-SE gave rather large NO₂ sensitivity, the sensor attached with Ni_0.95Cr_0.03O_1−δ -SE exhibited fast recovery rate with an acceptable sensitivity. The Δemf (electromotive force) of the sensors varied linearly with NO₂ concentration in the examined range of 50–400 ppm on a logarithmic scale. Based on the results of measurements for polarization, complex impedance and gas phase catalysis, the fast recovery was attributable to the high rate for the anodic reaction of O₂ at the Ni_0.95Cr_0.03O_1−δ /YSZ interface, and the lower NO₂ sensitivity was caused by both the high rate for the anodic reaction of O₂ and the high degree for the gas phase conversion of NO₂ to NO.     

Synthesis and evaluation of ketophosph(on)ates as beta-lactamase inhibitors

A series of amidoketophosph(on)ates of general structure PhCH2OCONHCH(R)COCHR'(CH2)n(O)P(O2-)(O)R' (R = H, CH3; R' = H, CH3; n = 0, 1; R' = H, CH3, Et, Ph) have been prepared as a potential source of beta-lactamase inhibitors. The phosphonates (n = 0) were obtained by means of the Arbuzov reaction while most of the phosphates were achieved from reaction of phosph(or/on)ic acids with the appropriate diazoketone PhCH2OCONHCH(R)COCR'N2. The electrophilicity of the carbonyl group in the resulting phosph(on)ates was assessed by the degree of hydration in aqueous solution, determined from NMR spectra. These compounds inhibited typical class C and class D beta-lactamases, particularly the latter group, but showed no activity against class A enzymes. To enhance the carbonyl electrophilicity, an alpha-difluorinated analogue (R = H, CHR' = CF2, n = 0, R' = Et) was also prepared, but no enhanced inhibitory activity was observed. All evidence suggested that these compounds inhibited in the carbonyl form rather than by formation of tetrahedral adducts at the beta-lactamase active site. They show promise as leads to specific class D beta-lactamase inhibitors.     

Synthesis of novel indole based cyclophanes and cylindrical cyclophanes by tandem alkylation methodology using NaH

Treatment of 1 equiv of 1,3-bis(bromomethyl)benzene and 2,6-bis(bromomethyl)pyridine with 1 equiv of indole in the presence of NaH in THF afforded the symmetrical cyclophanes 1 and 2. Using similar methodology, cylindrical cyclophanes 3 and 4 were obtained from 2 equiv of 1,3,5-trimethyl-2,4,6-tris(bromomethyl)benzene and 1,3,5-tris(bromomethyl)benzene with 3 equiv of indole.     

Photonic crystal with epsilon negative and double negative materials as an optical sensor

Two ternary photonic crystals are proposed for sensing applications. The first one is composed of an air layer as an analyte sandwiched between two double negative material (DNM) layers whereas the second one consists of an air layer sandwiched between two epsilon negative material (ENM) layers. The transmission spectrum is studied for two different values of the refractive index of the analyte layer with ?n = 0.01. A specific peak in the transmission spectrum is observed and the wavelength at which the peak occurs is determined. The wavelength shift due to any change in the index of the analyte layer is also determined. The effect of varying the parameters of the DNM and ENM on the sensitivity of the sensor is discussed. It is found that the sensitivity of the structure ENM/air/ENM is much greater than that of the structure DNM/air/DNM and it is estimated as 26 times of the sensitivity of the latter structure.     

Characterization of pure and urea-doped γ-glycine single crystals grown by solution method

Pure and urea-doped gamma-glycine (γ-glycine) single crystals were grown by solution method with slow evaporation technique. When urea was added as dopant, morphological alterations were noticed in γ-glycine crystals. Structural characterization of the grown crystals was carried out by single and powder X-ray diffraction (XRD) methods and it is observed that the samples crystallize in non-centrosymmetric space groups. UV-visible transmittance studies were performed to analyse optical transparency of pure and urea-doped γ-glycine crystals and found that the crystals were transparent in the entire visible-NIR region. Density and melting point of the grown crystals were measured. Second harmonic generation (SHG) for the grown crystals of this work was confirmed using Nd:YAG laser. Thermogravimetric and differential thermal analyses (TG/DTA) thermograms reveal that the materials have good thermal stability. From Microhardness studies, it is observed that urea-doped γ-glycine crystal is harder than pure (undoped) sample.