基于三维静电势参数研究C60溶解性的构效关系

在量子化学从头算基础上,对一系列溶剂化合物分子进行了结构优化和三维静电势参数计算,运用多元线性回归分析和神经网络方法对C60在121种不同溶剂的溶解性与计算的结构参数进行了构效关系研究.用建立起来的QSPR 关系式对15种不同结构类型溶剂进行了预测,并阐述了C60溶质与不同溶剂之间的相互作用,获得了满意的结果.     

Effect of the sixth axial ligand in CS-ligated iron(II)octaethylporphyrinates: structural and Mössbauer studies

The effect of a sixth ligand in a series of low-spin thiocarbonyl-ligated iron(II)octaethylporphyrinates has been investigated. Six-coordinate complexes have been synthesized and characterized by M?ssbauer and infrared spectroscopy and single-crystal X-ray structure determinations. The results are compared with the five-coordinate parent complex. The crystal structures of [Fe(OEP)(CS)(1-MeIm)] and [Fe(OEP)(CS)(Py)] are reported and discussed. The 1-methylimidazole and pyridine derivatives exhibit Fe-C(CS) bond distances of 1.703(4) and 1.706(2) A that are significantly longer than the 1.662(3) A reported for five-coordinate [Fe(OEP)(CS)] (Scheidt, W. R.; Geiger, D. K. Inorg. Chem. 1982, 21, 1208). The trans Fe-N(ligand) distances of 2.112(3) and 2.1550(15) A observed for the 1-methylimidazole and pyridine complex are approximately 0.13 A longer than those observed for analogous bis-ligated complexes and are consistent with a significant structural trans effect for the CS ligand. M?ssbauer investigations carried out for five- and six-coordinate thiocarbonyl derivatives with several different sixth axial ligands reveal interesting features. All derivatives exhibit very small isomer shift values, consistent with a very strong interaction between iron and CS. The five-coordinate derivative has delta(Fe) = 0.08 mm/s, and the six-coordinate complexes exhibit delta(Fe) = 0.14 to 0.19 mm/s at 4.2 K. The five-coordinate complex shows a large quadrupole splitting (DeltaE(q) = 1.93 mm/s at 4.2 K) which is reduced on coordination of the sixth ligand (DeltaE(q) = 0.42-0.80 mm/s at 4.2 K). Addition of a sixth ligand also leads to a small decrease in the value of nu(CS). Correlations in structural, IR, and M?ssbauer results suggest that the sixth ligand effect is primarily induced by changes in sigma-bonding. The structure of [Fe(OEP)(CS)(CH(3)OH)] is briefly reported. Crystal data: [Fe(OEP)(CS)(1-MeIm)] crystallizes in the monoclinic system, space group P2(1)/n, Z = 4, a = 9.5906(5) A, b = 16.704(4) A, c = 23.1417(6) A, beta = 100.453(7) degrees. [Fe(OEP)(CS)(Py)] crystallizes in the triclinic system, space group P1, Z = 5, a = 13.9073(6) A, b = 16.2624(7) A, c = 22.0709(9) A, alpha = 70.586(1) degrees, beta = 77.242(1) degrees, gamma = 77.959(1) degrees. [Fe(OEP)(CS)(CH(3)OH)] crystallizes in the triclinic system, space group P1, Z = 1, a = 9.0599(5) A, b = 9.4389(5) A, c = 11.0676(6) A, alpha = 90.261(1) degrees, beta = 100.362(1) degrees, gamma = 114.664(1) degrees.     

A novel neutral receptor for selective recognition of H2PO 4 −

A new urea-based receptor was designed to selectively recognize H₂PO₄⁻ among other anions (such as F^-, Cl^-, Br^-, I^-, OH^-, AcO^-) in organic solvent (DMSO) through intermolecular hydrogen bonding. Addition of anions to the receptor caused changes in UV–vis spectrum which provided the first indication of its anion binding ability. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

磺化嵌段型共聚物在质子交换膜燃料电池中的应用

燃料电池是以碳氢化合物为燃料的一种新型、清洁的发电装置,而其中的质子交换膜燃料电池由于具有可快速启动的优点而可应用于机动车等领域。所用的质子交换膜需要具有高的质子传导性、低的甲醇/水渗透性、好的机械和热稳定性以及合适的价格等特点,但目前已经工业化的Nafion膜并未能全部满足上述要求。为了解决这些问题,目前已经开发了多种新的质子交换膜。本文对其中的磺化嵌段型聚醚砜、磺化嵌段型聚酰亚胺和苯乙烯基嵌段共聚物在质子交换膜燃料电池中的应用进行了综述,并与Nafion膜和相应的无规共聚物的性能进行了比较。最后展望了嵌段共聚物在质子交换膜领域的发展趋势。     

原子吸收光谱法测定茶叶中铅和镉时消解方法的优化

采用多种方法对同一种茶叶进行消解,用原子吸收光谱法测定不同方法消解的茶叶中有害微量元素铅和镉的含量并进行对比,探索了茶叶中微量元素铅和镉低损耗的最佳消解条件.实验结果表明,不同的消解方式对茶叶中微量元素的测定结果影响很大.测定茶叶中铅和镉元素时,采用硝酸-高氯酸加盖浸泡过夜方法较为理想.     

Co-Production of Dimethyl Carbonate,Dimethoxymethane and Dimethyl Ether from Methanol: Process Design and Exergy Analysis

Dimethyl carbonate is an important green chemical that has been widely used in the chemical industry. In the production of dimethyl carbonate, methanol oxidative carbonylation has been studied, but the conversion ratio of dimethyl carbonate using this method is too low, and the subsequent separation requires a large amount of energy due to methanol and dimethyl carbonate being azeotrope. In this paper, the strategy of “reaction instead of separation” is proposed. Based on this strategy, a novel process is developed to combine the production of DMC with that of dimethoxymethane (DMM) and dimethyl ether (DME). The co-production process was simulated using Aspen Plus software, and the product purity was up to 99.9%. The exergy analysis of the co-production process and the existing process was carried out. The exergy destruction and exergy efficiency were compared with those of the existing production processes. The results show that the exergy destruction of the co-production process is about 276% less than that of the single-production processes, and the exergy efficiencies in the developed co-production process are significantly improved. The utility loads of the co-production process are significantly lower than that of the single-production process. The developed co-production process increases the methanol conversion ratio to 95%, with a reduced energy requirement. It is proved that the developed co-production process can provide an advantageous option over the existing processes with improved energy efficiency and material savings. The strategy of “reaction instead of separation” is feasible. A new strategy is proposed for azeotrope separation.     

DA-LSTM-VAE: Dual-Stage Attention-Based LSTM-VAE for KPI Anomaly Detection

To ensure the normal operation of the system, the enterprise’s operations engineer will monitor the system through the KPI (key performance indicator). For example, web page visits, server memory utilization, etc. KPI anomaly detection is a core technology, which is of great significance for rapid fault detection and repair. This paper proposes a novel dual-stage attention-based LSTM-VAE (DA-LSTM-VAE) model for KPI anomaly detection. Firstly, in order to capture time correlation in KPI data, long–short-term memory (LSTM) units are used to replace traditional neurons in the variational autoencoder (VAE). Then, in order to improve the effect of KPI anomaly detection, an attention mechanism is introduced into the input stage of the encoder and decoder, respectively. During the input stage of the encoder, a time attention mechanism is adopted to assign different weights to different time points, which can adaptively select important input sequences to avoid the influence of noise in the data. During the input stage of the decoder, a feature attention mechanism is adopted to adaptively select important latent variable representations, which can capture the long-term dependence of time series better. In addition, this paper proposes an adaptive threshold method based on anomaly scores measured by reconstruction probability, which can minimize false positives and false negatives and avoid adjustment of the threshold manually. Experimental results in a public dataset show that the proposed method in this paper outperforms other baseline methods.     

The Anisotropic Chemical Reaction Mechanism of 1,3,3-trinitroazetidine (TNAZ) under Different Shock Wave Directions by ReaxFF Reactive Molecular Dynamics Simulations

1,3,3-Trinitroazetidine (TNAZ) has good thermal stability and low shock sensitivity, among other properties, and it has broad prospects in insensitive ammunition applications. In this study, a molecular dynamics calculation based on the ReaxFF-lg force field and multiscale shock technique (MSST) was used to simulate the shock-induced chemical reaction of TNAZ with different shock wave directions. The results showed that the shock sensitivity of TNAZ was in the order of [100] > [010] > [001]. There were significant differences in molecular arrangements in different shock directions, which affected the reaction rate and reaction path in different directions. The molecular arrangement in the [010] and [001] directions formed a “buffer” effect. The formation and cleavage of bonds, formation of small molecules and growth of clusters were analyzed to show the effect of the “buffer”. The polymerization reactions in the [010] and [001] directions appeared later than that in the [100] direction, and the cluster growth in the [010] and [001] directions was slower than that in the [100] direction. In different shock loading directions, the formation and cleavage mechanisms of the N-O bonds of the TNAZ molecules were different, which resulted in differences in the initial reaction path and reaction rate in the three directions     

Radical-Induced Cascade Annulation/Hydrocarbonylation for Construction of 2-Aryl-4H-chromen-4-ones

A robust metal- and solvent-free cascade radical-induced C-N cleavage/intramolecular 6-endo-dig annulation/hydrocarbonylation for the synthesis of the valuable 2-aryl-4H-chromen-4-ones is described. This practical synthesis strategy utilizes propargylamines and air as the oxygen source and green carbonylation reagent, in which propargylamines are activated by the inexpensive and available dimethyl 2,2′-azobis(2-methylpropionate) (AIBME) and (PhSe)₂ as the radical initiators. This simple and green protocol features wide substrate adaptability, good functional group tolerance, and amenability to scaling up and derivatizations.     

基于能量变化的微尺度金属应变突变准则研究

微尺度金属在塑性变形过程中呈现出显著的应变突变特性.论文以力加载条件下单晶Ni微米柱体和位移加载下Au纳米柱体为对象,探讨应变突变的判定准则与不同特征阶段的判别条件.首先从经典塑性理论Hill稳定性条件出发,分析微柱体变形过程中的动能变化,提出了应变突变发生与结束的判定准则.进一步分析柱体变形过程中的内能变化,结合动能变化的分析结果,给出了微尺度金属不同变形阶段的判别条件.通过与文献中实验与理论结果对比发现,基于动能变化的应变突变判定准则能够判断应变突变的发生与结束,基于能量变化的判别条件可以有效区分微柱体的不同变形阶段.最后对新理论准则的可靠性与适用性进行了讨论.