The Synthesis and Structure of Selected Methyl (3,4-Di-O-acetyl-2-deoxy-2-hydroxyimino-d-arabino-hexopyranosid)urontes

Abstract

Dimeric methyl (3,4-di-O-acetyl-2-deoxy-2-nitroso-α-d-glucopyranosyl chloride)uronate (1) reacts with nucleophiles such as: ethanol, pyrazole, methyl N-tert-butyloxycarbonyl-L-serinate to give corresponding glycosides. The stereospecifity of the glycosidation reaction depends mainly on the employed nucleophile. The configuration and conformation of the obtained glycosides were established on the basis of ¹H NMR and polarimetric data, and additionally the structure of 1-(methyl 3,4-di-O-acetyl-2-deoxy-2-(Z)-hydroxyimino-α-d-arabino-hexopyranosyluronate)pyrazole (6), was supported by X-ray diffraction data.     

Simple micellar electrokinetic chromatography method for the determination of hydrogen sulfide in hen tissues

A new method for the determination of hydrogen sulfide in hen tissues has been developed and validated. For estimation of hydrogen sulfide content, a sample (0.1 g) of hen tissue was treated according to the procedure consisted of some essential steps: simultaneous homogenization of a tissue and derivatization of hydrogen sulfide to its S‐quinolinium derivative with 2‐chloro‐1‐methylquinolinium tetrafluoroborate, separation of so‐formed derivative by micellar electrokinetic chromatography with sweeping, and detection and quantitation with the use of UV detector set to measure analytical signals at 375 nm. Effective electrophoretic separation was achieved using fused silica capillary (effective length 41.5 cm, 75 μm id) and 0.05 mol/L, pH 8 phosphate buffer with the addition of 0.04 mol/L SDS and 26% ACN. The lower limit of quantification was 0.12 μmol hydrogen sulfide in 1 g of tissue. The calibration curve prepared in tissue homogenate for hydrogen sulfide showed linearity in the range from 0.15 to 2.0 μmol/g, with the coefficient of correlation 0.9978. The relative standard deviation of the points of the calibration curve varied from 8.3 to 3.2% RSD.     

Monosaccharides as internal probes for the determination of the absolute configuration of 2-butanol

D-Glucose, D-mannose and L-rhamnose were reacted with a racemic mixture of 2-butanol, and the resulting alpha-glycosides were analyzed by 1H NMR with COSY and NOESY experiments. Conformational analysis of alpha-glycosidic bonds performed with molecular modeling and appropriate heteronuclear long-range coupling measurements and combined with analysis of dipolar couplings observed in NOESY spectra allowed the assignment of absolute configuration in the aglycones of elucidated alpha-glycosides.     

Anodic oxidation of the Ti–13Nb–13Zr alloy

This work presents the results of the investigations on the electropolishing and anodic oxidation of the Ti–13Nb–13Zr titanium alloy. Electropolishing was conducted in the solution containing ammonium fluoride and sulfuric acid, whereas the solution of phosphoric acid was used for anodic oxidation of the alloy. The influence of electropolishing and anodization process parameters on the texture (scanning electron microscopy (SEM)) and chemical composition (X-ray photoelectron spectroscopy (XPS)) of the surface layer was established. Electrochemical impedance spectroscopy in 5 % NaCl solution was used for the determination of the corrosion resistance of the alloy.     

Polyurethane anionomers synthesised with aromatic, aliphatic or cycloaliphatic diisocyanates, polyoxyethylene glycol and 2,2-bis-(hydroxymethyl)propionic acid. Part 3. Electrical properties of polyurethane coatings

The following electrical properties were found for polymer coatings obtained from polyurethane anionomers synthesised with the use of various diisocyanates: volume resistivity, permittivity and dielectric dissipation factor. The effects were discussed from the molecular structures and phase structures of those anionomers on the value of their ionic conductivity and polarizability. The anionomer prepared from the aliphatic diisocyanate was found to offer ionic conductivity; hence, that material can be considered to be a solid electrolyte, which exhibits a considerable susceptibility to structural modifications in the alternating electric field.     

Properties of the halogen-hydride interaction: an ab initio and "atoms in molecules" analysis

X-Cl...H-Y interactions are analyzed by applying ab initio methods as well as the Bader theory. All calculations were performed using Pople's basis sets (6-311++G(2df,2pd) and 6-311++G(3df,3pd)) as well as the Dunning-type bases (aug-cc-pVDZ and aug-cc-pVTZ) within the MP2 method. For the complexes analyzed here, X-Cl and H-Y may be treated as a Lewis acid and a Lewis base, respectively. The Cl...H interactions are rather weak or at most moderate since, for the strongest interaction of the F3...HLi complex, the binding energy calculated at the MP2/6-311++G(3df,3pd) level of approximation amounts to -3.4 kcal/mol, and the H...Cl distance is equal to 2.65 A, less than the corresponding sum of van der Waals radii. These interactions may be classified as halogen-hydride interactions. However, some of the complexes analyzed, especially F3SiCl...HBeF and F3SiCl...HBeF, are very weakly bound, probably by typical van der Waals interactions.     

Insights into electrocatalytic activity of epitaxial graphene on SiC from cyclic voltammetry and ac impedance spectroscopy

Electrocatalytic activity of graphene grown epitaxially on SiC is studied using cyclic voltammetry and electrochemical impedance spectroscopy. AFM images show step-like topography of SiC-graphene. For ferri-/ferrocyanide redox couple, no voltammetric response is observed at the pristine graphene. Basal planes of graphite are electrochemically inactive as well. After electrochemical oxidation, apparent redox peaks appear at both the graphene and graphite electrode. However, more intensive redox peaks are observed at graphene, where simultaneous redox reaction with the adsorbed and the diffused ferri-/ferrocyanide ions occurs. Electrochemical impedance measurements show that the graphene electrode behaves like an array of microelectrodes. We used the partially blocked electrode model to fit impedance data. Using the fitting parameters, a size of microelectrodes was found to be 23.8?±?2.1 μm and the active surface of graphene was estimated to be 21 %. A value of the standard electron transfer rate constant found for the anodized epitaxial graphene (2.16?±?0.32)?×?10^??3cm???s^??1) is by one order of magnitude lower than the standard rate constant estimated for the anodized graphite basal planes (～5?×?10^??2cm???s^??1). Electrochemical reduction causes total disappearance of electrochemical responses at the graphene electrode, whereas only slight decrease of the peak currents is observed at the reduced graphene. Such behavior proves that different activation mechanisms occur at the graphene and graphite electrodes.     

Application of polypyrrole nanowires for the development of a tyrosinase biosensor

Polypyrrole nanowires (PPyNWs) were fabricated and examined as a structural component of amperometric biosensor matrix. An enzyme, tyrosinase (TYR), was immobilized onto PPyNWs using glutaraldehyde (GA). Matrix composite morphology was investigated using scanning electron microscopy. Electrochemical behavior of the prepared PPyNWs/GA/TYR biosensor towards catechol was studied and the assessment of its analytical characteristics was carried out taking into account linear range, sensitivity, repeatability, reproducibility and operational stability.     

Energetic heterogeneity of the surface of a molecularly imprinted polymer studied by high-performance liquid chromatography

A sequential combination of reversed-phase liquid chromatography–mass spectrometry (LC–MS) and capillary electrophoresis (CE) has been explored in order to perform separation and characterization of a multicomponent peptide mixture from the synthesis of leuprolide. The mixture was first analyzed and fractionated by LC–MS, and the collected fractions were subsequently separated by CE. Unambiguous identification of the electrophoretic peaks was achieved by injecting the collected fractions separately and spiking the leuprolide crude mixture. Furthermore, structural information about the components of the mixture provided by several semi-empirical migration models has been used to check the accuracy of the structures previously proposed by LC–MS. Combination of the two orthogonal techniques results in an enhancement of their individual selectivity characteristics.     

Simple generation of cationic aluminum alkyls and alkoxides based on the pendant arm tridentate schiff base

The prepared in situ methyl(chloro)aluminum complex (2) from Me2AlCl and the pendant arm tridentate Schiff base (H-SchNMe2) was used to generate the methylaluminum cationic species [(SchNMe2)AlMe]+ in further reaction with 1 equiv of AlCl3 or NaBPh4 as the chloride abstracting reagents. The exposure of the resulting methylaluminum cationic species to an excess of dry dioxygen at 0 degrees C afforded the alkoxyaluminum cationic species, [(SchNMe2)AlOMe]+ or [(SchNMe2)AlOPh]+. The alkoxylaluminum cations proved to be a very efficient catalyst in the polymerization of epsilon-caprolactone.