Application of a contactless conductometric detector for the simultaneous determination of small anions and cations by capillary electrophoresis with dual-opposite end injection

A contactless conductometric detection (CCD) system for capillary electrophoresis (CE) with a flexible detection cell was applied for the simultaneous determination of small anions and/or cations in rain, surface and drainage water samples. The applied frequency, the amplitude of the input signal, the electrolyte conductivity and electrode distance were found to be the most significant factors affecting the detection sensitivity. 2-(N-Morpholino)ethanesulfonic acid/histidine-based (MES/His) electrolytes were used for direct conductivity detection of anions and cations, while ammonium acetate was selected for indirect conductivity determination of alkylammonium salts. For the simultaneous separation procedure, involving dual-opposite end injection, an electrolyte consisting of 20 mM MES/His, 1.5 mM 18-crown-6 and 20 microM cetyltrimethylammonium bromide provided baseline separation of 13 anions and cations in less than 6 min. The detection limits achieved were 7-30 micrograms/l for direct conductometric detection of various common inorganic cations and anions, excluding F- (62 micrograms/l) and H2PO4- (250 micrograms/l), and 35-178 micrograms/l for indirect conductometric detection of alkyl ammonium cations. The developed electrophoretic method with conductometric detection was compared to ion chromatography.     

Multi-element characterization of silicon nitride powders by atomic and mass spectrometric solution methods

A sample pretreatment technique for silicon nitride involving digestion and matrix/traces separation was developed by means of radiotracers and applied to analysis of this material by inductively coupled plasma atomic emission spectrometry, inductively coupled plasma mass spectrometry and graphite furnace atomic absorption spectrometry. The results obtained for a high purity silicon nitride material by these methods are compared each with the other and with those obtained by neutron activation analysis. The limits of detection and the capabilities of the methods are compared and discussed.     

Interaction of porphyrins with a dendrimer template: self-aggregation controlled by pH

The interaction between self-aggregated porphyrins such as 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin (TPPS) and 5,10,15,20-tetrakis(4-phosphonatophenyl)porphyrin (TPPP), and a generation 5 (G5) PAMAM dendrimer template is governed by minute differences of porphyrin acido-basic properties. While at neutral pH both monomeric TPPS and TPPP form complexes with G5, decreasing pH did not lead to porphyrin ring protonation (pK(a) approximately 5) but rather to the preferential formation of H-aggregates (probably H-dimers), most likely due to protonation of the G5. Upon further acidification of the solution, this face-to-face orientation of the porphyrin units is being converted to edge-to-edge aligned J-aggregates with a tightly defined structure. This process starts by protonation of the porphyrin ring at pH below 2.3 and 2.8 for TPPS and TPPP, respectively. The AFM imaging of porphyrin/G5 nanostructures obtained at pH 0.7 shows the formation of long nanorods of TPPS with partially aggregated G5 and small aggregates of TPPP connected to individual G5 molecules.     

High-throughput capillary electrophoretic method for determination of total aminothiols in plasma and urine.

Increased interest in the analysis of aminothiols in body fluids during the last years results in a request for high-throughput analytical methods for their determination. We report here a novel, high-throughput method for the determination of total concentrations of biogenous aminothiols - homocysteine, cysteine, glutathione, cysteinylglycine, gamma-glutamylcysteine, and of penicilamine, mercaptopropionylglycine, and cysteamine, three compounds used to treat disorders of aminothiol metabolism in plasma and urine. Samples were reduced with tris(carboxyethyl)phosphine and labeled with 5-(bromomethyl)fluorescein. Capillary electrophoretic separations were performed in 60 mmol/L borate - 15 mmol/L sodium dodecyl sulfate - 2-amino-2-methyl-1-propanol, pH 10.0, with laser-induced fluorescence detection. Analysis time was less than 2 min. The assay is linear (r > 0.999) up to 500 micromol/L. Reproducibilities of migration times (coefficient of variation, CV) were < 0.5%. Interassay repeatabilities (CV, n = 10) were 5.08% and 6.09% for 5 micromol/L addition of homocysteine and 0.60% and 3.78% for 100 micromol/L addition of cysteine in plasma and urine, respectively. Recovery values were within 94-106% and sensitivity was better than 0.19 micromol/L for all analyzed compounds. Results agreed well with a standard high-performance liquid chromatography (HPLC) method. The diagnostic usefulness of the method has been proven on 79 samples of cystinuric patients and 12 samples of homocystinuric patients. We report here a novel method for the determination of aminothiols in body fluids by capillary electrophoresis (CE). Determination is fast and sensitive enough for diagnostic purposes.     

Fast ion chromatography of inorganic anions and cations on a lysine bonded porous silica monolith

A 0.46 cm x 10.0 cm silica monolith column was modified through the in situ covalent attachment of lysine (2,6-diaminohexanoic acid) groups. Due to the zwitterionic nature of the resultant stationary phase, the modified monolithic column contained both cation and anion exchange capacity. In the case of cation exchange, the capacity was found to be relatively low at between 5 and 6.5 micromoles Me2+ per column. However, as expected, the lysine monolith exhibited a higher anion exchange capacity at 12-13 micromoles A- per column (at pH 3.0), which was found to be dependent upon column pH, due to the dissociation of the weak acid carboxylic acid groups. High-performance separations of transition metal cations and inorganic anions were achieved using the modified monolith, with the effects of eluent concentration, pH and flow rate evaluated. Using elevated flow rates of up to 5 mL/min the separation of nitrite, bromate, bromide, nitrate, iodide and thiocyanate was possible in approximately 100 s with peak efficiencies of between 50 and 100,000 N/m and retention time %RSD of under 0.3%.     

Ion-chromatographic determination of chromium (VI)

Summary A simple ion-chromatographic method has been developed for the selective determination of chromium (VI) using UV-photometric detection. The anion exchanger was based on a matrix of a 2-hydroxyethyl-methacrylate copolymer; the mobile phase consisted of phosphate buffer and sodium perchlorate. The relative standard deviation was 2.26%. Application was made to waste waters of the metallurgical industry.     

Concrete quantum logics with covering properties

LetL be a concrete (=set-representable) quantum logic. Letn be a natural number (or, more generally, a cardinal). We say thatL admits intrinsic coverings of the ordern, and writeL C _n , if for any pairA, BL we can find a collection {C _i iI}, where cardI<n andC _i L for anyiI, such thatA B= _il C _i . Thus, in a certain sense, ifLC _n , then the rate of noncompatibility of an arbitrary pairA,BL is less than a given numbern. In this paper we first consider general and combinatorial properties of logics ofC _n and exhibit typical examples. In particular, for a givenn we construct examples ofL C _n+1\C _n . Further, we discuss the relation of the classesC _n to other classes of logics important within the quantum theories (e.g., we discover the interesting relation to the class of logics which have an abundance of Jauch-Piron states). We then consider conditions on which a class of concrete logics reduce to Boolean algebras. We conclude with some open questions.     

The first tetranuclear vanadium(V) peroxo complex: Preparation, vibrational spectra and X-ray crystal structure of K6[V4O4(O2)8(PO4)]·9H2O

The vanadium(V) peroxo phosphato complex K₇[V₄O₄(O₂)₈(PO₄)]·9H₂O has been obtained from the KVO₃---KH₂PO₄---KOH---H₂O₂---H₂O---C₂H₅OH system. The X-ray structural analysis revealed a tetranuclear anionic structure in which two dinuclear [V₂O₂(O)₂)₂(μ-η¹ : η²-O₂)₂] units are connected by the μ₄-PO₄ group.     

Correlation between Small-Angle X-ray Scattering spectra and apparent diffusion coefficients in the study of structure and interaction of sodium taurodeoxycholate micelles

Small-Angle X-ray Scattering (SAXS) and Dynamic Light Scattering (DLS) measurements were carried out on aqueous micellar solutions of the ionic biological detergent sodium taurodeoxycholate (NaTDC). Apparent diffusion coefficients (D(app)) and SAXS spectra of NaTDC 0.1 M solutions at different ionic strengths (0.1-0.3 M NaCl) were reported. A comparative analysis of SAXS spectra and D(app) data was performed to infer information on particle structure and interaction potential. Uniform particles with a spherical, an oblate, and a prolate symmetry were used to model the micelles in the data interpretation. A hard-core interaction shell of suitable thickness and a screened Coulomb potential of the electric double layer (EDL potential) were alternatively used to represent the long-range repulsive tail of the interaction potential. The Percus Yevick and the Rescaled Mean Spherical Approximation were applied. To compare the data of the two techniques, for each sample, a D(app) was calculated from the SAXS best-fitting geometrical parameters and interparticle structure factor of the micelles. Hence, a fitting procedure involving both the scattering and D(app) data was performed. The interpretation of SAXS spectra does not allow the discrimination between the oblate and the prolate symmetries of the aggregates. On the other hand, the comparison of calculated and experimental D(app) values indicates that the prolate ellipsoid is better suited to represent the micelle shape. Moreover, the agreement between calculated and experimental D(app) values is sensitively better at the lowest NaCl concentration when the EDL potential is used. A rodlike micellar growth and a progressive screening of the electrostatic interactions is testified by the trends of best-fitting parameters as a function of the added electrolyte.     

RP-HPLC analysis of phenolic compounds and flavonoids in beverages and plant extracts using a CoulArray detector

Methods were developed for the analysis of natural antioxidants including phenolic compounds and flavonoids in beverages and plant extracts using gradient HPLC with multi-channel electrochemical coulometric detection. Suitability of various reversed-phase columns for this purpose was compared; pH and mobile phase gradients were optimized with respect to the separation selectivity and sensitivity of detection. Because of different target compounds in various sample types, the overlapping resolution maps and the normalized resolution product approaches described earlier were used to select optimum columns and gradients to suit the analysis of the individual sample types. The methods were applied to the analysis of phenolic compounds and flavonoids in beer, wine, tea, and yacon extracts. 32 phenolic compounds were identified and determined, including derivatives of benzoic and cinnamic acids, flavones, and a few related glycosides. Eight-channel CoulArray detection offers high selectivity and sensitivity with limits of detection in the low microg L(-1) range, at least an order of magnitude lower than single-channel coulometric detection using the Coulochem detector. No special sample pretreatment is necessary and, because of the compatibility of the CoulArray detector with gradient elution, phenolic antioxidants of different polarities can be determined in a single run. In addition to the retention times, the ratios of the areas of the pre-dominant and post-dominant peaks to the area of the dominant peak can be used for improved identification of natural antioxidants.