Theoretical analysis of all-optical clocked D flip-flop using a single SOA assisted symmetric MZI

A novel scheme for an all-optical clocked D flip-flop, with very low complexity, is proposed and numerically demonstrated. This new flip-flop configuration is based on a semiconductor optical amplifier — Mach–Zehnder interferometer (SOA-MZI), with a feedback loop, and presents two stable states determined by the phase shift between the two MZI arms.     

Hybrid EuIII Coordination Luminophore Standing on Two Legs on Silica Nanoparticles for Enhanced Luminescence

In this study, we have demonstrated a two-legged, upright molecular design method for monochromatic and bright red luminescent Ln^III-silica nanomaterials. A novel Eu^III-silica hybrid nanoparticle was developed by using a doubly binding TPPO−Si(OEt)₃ (TPPO: triphenyl phosphine oxide) linker. The TPPO−Si(OEt)₃ was confirmed by ¹H, ³¹P, ²⁹Si NMR spectroscopy and single-crystal X-ray analysis. Luminescent Eu(hfa)₃ and Eu(tfc)₃ moieties (hfa: hexafluoroacetylacetonate, tfc: 3-(trifluoromethylhydroxymethylene)camphorate) were fixed onto TPPO−Si(OEt)₃-modified silica nanoparticles, producing Eu(hfa)₃(TPPO−Si)₂-SiO₂ and Eu(tfc)₃(TPPO−Si)₂-SiO₂, respectively. Eu(hfa)₃(TPPO−Si)₂−SiO₂ exhibited the higher intrinsic luminescence quantum yield (93 %) and longer emission lifetime (0.98 ms), which is much larger than those of previously reported Eu^III-based hybrid materials. Eu(tfc)₃(TPPO−Si)₂−SiO₂ showed an extra-large intrinsic emission quantum yield (54 %), although the emission quantum yield for the precursor Eu(tfc)₃(TPPO−Si(OEt)₃)₂ was found to be 39 %. These results confirmed that the TPPO−Si(OEt)₃ linker is a promising candidate for development of Eu^III-based luminescent materials.     

Synchronization and Non-Smooth Dynamical Systems

In this article we establish an interaction between non-smooth systems, geometric singular perturbation theory and synchronization phenomena. We find conditions for a non-smooth vector fields be locally synchronized. Moreover its regularization provide a singular perturbation problem with attracting critical manifold. We also state a result about the synchronization which occurs in the regularization of the fold-fold case. We restrict ourselves to the 3-dimensional systems (ℓ = 3) and consider the case known as a T-singularity.     

Hydroxyl Radical Generation and DNA Nuclease Activity: A Mechanistic Study Based on a Surface‐Immobilized Copper Thioether Clip‐Phen Derivative

Coordination compounds of copper have been invoked as major actors in processes involving the reduction of molecular oxygen, mostly with the generation of radical species the assignment for which has, so far, not been fully addressed. In the present work, we have carried out studies in solution and on surfaces to gain insights into the nature of the radical oxygen species (ROS) generated by a copper(II) coordination compound containing a thioether clip‐phen derivative, 1,3‐bis(1,10‐phenanthrolin‐2‐yloxy)‐N‐(4‐(methylthio)benzylidene)propan‐2‐amine (2CP‐Bz‐SMe), enabling its adsorption/immobilization to gold surfaces. Whereas surface plasmon resonance (SPR) and electrochemistry of the adsorbed complex indicated the formation of a dimeric Cu^I intermediate containing molecular oxygen as a bridging ligand, scanning electrochemical microscopy (SECM) and nuclease assays pointed to the generation of a ROS species. Electron paramagnetic resonance (EPR) data reinforced such conclusions, indicating that radical production was dependent on the amount of oxygen and H₂O₂, thus pointing to a mechanism involving a Fenton‐like reaction that results in the production of OH^..     

Applicability of Microaerobic Technology to Enhance BTEX Removal from Contaminated Waters

As the addition of low concentrations of oxygen can favor the initial degradation of benzene, toluene, ethylbenzene, and xylenes (BTEX) compounds, this work verified the applicability of the microaerobic technology to enhance BTEX removal in an anaerobic bioreactor supplemented with high and low co-substrate (ethanol) concentrations. Additionally, structural alterations on the bioreactor microbiota were assessed throughout the experiment. The bioreactor was fed with a synthetic BTEX-contaminated water (~ 3 mg L^?1 of each compound) and operated at a hydraulic retention time of 48 h. The addition of low concentrations of oxygen (1.0 mL min^?1 of atmospheric air at 27 °C and 1 atm) assured high removal efficiencies (> 80%) for all compounds under microaerobic conditions. In fact, the applicability of this technology showed to be viable to enhance BTEX removal from contaminated waters, especially concerning benzene (with a 30% removal increase), which is a very recalcitrant compound under anaerobic conditions. However, high concentrations of ethanol adversely affected BTEX removal, especially benzene, under anaerobic and microaerobic conditions. Finally, although bacterial community richness decreased at low concentrations of ethanol, in general, the bioreactor microbiota could deal with the different operational conditions and preserved its functionality during the whole experiment.     

Advances in positron and electron scattering*

The topical issue on Advances in Positron and Electron Scattering” combines contributionsfrom POSMOL 2015 together with others devoted to celebrate the unprecedented scientificcareers of our loyal colleagues and trusted friends Steve Buckman (Australian NationalUniversity, Australia) and Michael Allan (University of Fribourg, Switzerland) on theoccasion of their retirements. POSMOL 2015, the XVIII International Workshop on Low-EnergyPositron and Positronium Physics and the XIX International Symposium on Electron-MoleculeCollisions and Swarms, was held at Universidade NOVA de Lisboa, Lisboa, Portugal, from17–20 July 2015. The international workshop and symposium allowed to achieve a veryprivileged forum of sharing and developing our scientific expertise on current aspects ofpositron, positronium and antiproton interactions with electrons, atoms, molecules andsolid surfaces, and related topics, as well as electron interactions with molecules inboth gaseous and condensed phases. Particular topics include studies of electroninteractions with biomolecules, electron induced surface chemistry and the study of plasmaprocesses. Recent developments in the study of swarms are also fully addressed.     

Enantiodivergence in the reduction of α-methyl and α-halomethyl enones by microorganisms

Enones (Z)-3-methyl-(Z)-3-chloromethyl- and (Z)-3-bromomethyl-4-R-3-buten-2-one (R = n-pentyl, phenyl, 2′- and 4′-chlorophenyl, 3′- and 4′-nitrophenyl, 4′-methoxyphenyl) were synthesized and subjected to reduction by the microorganisms Saccharomyces cerevisiae andGeotrichum candidum. Whereas the bioreduction of 3-methy-4-R-3-buten-2-ones afforded the corresponding (S)-4-R-3-methybutan-2-ones, the bioreduction of 3-chloromethyl- and 3-bromomethyl-4-R-3-buten-2-ones afforded the corresponding (R)-4-R-3-methybutan-2-ones.     

Kinematics of layered reinforced-concrete planar beam finite elements with embedded transversal cracking

In this work crack formation and development is addressed and implemented in a planar layered reinforced-concrete beam element. The crack initiation and growth is described using the strength criterion in conjunction with exact kinematics of the interlayer connection. In this way a novel embedded-discontinuity beam finite element is derived in which the tensile stresses in concrete at the crack position reaching the tensile strength will trigger a crack to open. Since the element is multi-layered, in this way the crack is allowed to propagate through the depth of the beam. The cracked layer(s) will involve discontinuity in the cross-sectional rotation equal to the crack-profile angle, as well as a discontinuity in the position vector of the layer’s reference line. A bond–slip relationship is superimposed onto this model in a kinematically consistent manner with reinforcement being treated as an additional layer of zero thickness with its own material parameters and a constitutive law implemented in the multi-layered beam element.