Growth of Chlorella vulgaris on Sugarcane Vinasse: The Effect of Anaerobic Digestion Pretreatment

Microalgae farming has been identified as the most eco-sustainable solution for producing biodiesel. However, the operation of full-scale plants is still limited by costs and the utilization of industrial and/or domestic wastes can significantly improve economic profits. Several waste effluents are valuable sources of nutrients for the cultivation of microalgae. Ethanol production from sugarcane, for instance, generates significant amounts of organically rich effluent, the vinasse. After anaerobic digestion treatment, nutrient remaining in such an effluent can be used to grow microalgae. This research aimed to testing the potential of the anaerobic treated vinasse as an alternative source of nutrients for culturing microalgae with the goal of supplying the biodiesel industrial chain with algal biomass and oil. The anaerobic process treating vinasse reached a steady state at about 17 batch cycles of 24 h producing about 0.116 m³CH₄ kgCOD_vinasse ^?1. The highest productivity of Chlorella vulgaris biomass (70 mg l^?1 day^?1) was observed when using medium prepared with the anaerobic digester effluent. Lipid productivity varied from 0.5 to 17 mg l^?1 day^?1. Thus, the results show that it is possible to integrate the culturing of microalgae with the sugarcane industry by means of anaerobic digestion of the vinasse. There is also the advantageous possibility of using by-products of the anaerobic digestion such as methane and CO₂ for sustaining the system with energy and carbon source, respectively.     

Selenides and diselenides containing oxadiazoles: a new class of functionalised materials

A simple and efficient procedure for the synthesis of a new class of organoselenium liquid crystal compounds was developed. The coupling of aryl bromides with elemental selenium was catalysed using copper oxide nanopowder in the presence of potassium hydroxide employing dimethyl sulfoxide as the solvent. This is the first report of the synthesis and characterisation of liquid crystal-based diselenides. Their mesophases were characterised by polarising optical microscopy and differential scanning calorimetry. Compounds 1, 2 and 4b exhibited the smectic A phase. In addition, these compounds showed weak blue fluorescence in solution (λ_{max. em.} 350–405 nm) and a Stokes shift of around 90 nm.     

Analysis of PCBs in soils and sediments by microwave-assisted extraction,headspace-SPME and high resolution gas chromatography with ion-trap tandem mass spectrometry

A procedure for the determination of seven indicator PCBs in soils and sediments using microwave-assisted extraction (MAE) and headspace solid-phase microextraction (HS-SPME) prior to GC-MS/MS is described. Optimization of the HS-SPME was carried out for the most important parameters such as extraction time, sample volume and temperature. The adopted methodology has reduced consumption of organic solvents and analysis runtime. Under the optimized conditions, the method detection limit ranged from 0.6 to 1?ng/g when 5?g of sample was extracted, the precision on real samples ranged from 4 to 21% and the recovery from 69 to 104%. The proposed method, which included the analysis of a certified reference material in its validation procedure, can be extended to several other PCBs and used in the monitoring of soil or sediments for the presence of PCBs.     

Development and validation of a rapid RP‐HPLC method for analysis of (−)‐copalic acid in copaíba oleoresin

The Copaifera species (Leguminoseae) are popularly known as ‘copaíba’ or ‘copaíva’ and are grown in the states of Amazonas, Pará and Ceará in northern Brazil. The oleoresins obtained from these species have been extensively used owing to their pharmacological potential and their application in cosmetic and pharmaceutical preparations. In the present study, the development and validation of a novel, rapid and efficient RP‐HPLC methodology for the analysis of the diterpene (?)‐copalic acid (CA), pointed out as the only chemical marker of the Copaifera genus, are described. The regression equation (Y = 26,707x ? 29,498) was obtained with good linearity (r² = 0.9993) and the limits of quantification and detection were 9.182 and 3.032 µg/mL, respectively. The precision and the accuracy of the method were adequate (lower than 4%). Finally, the validation parameters evaluated were satisfactorily met, so the developed method represents a suitable tool for application in the quality control of such natural products. Further studies aiming to develop analytical methodologies for each Copaifera species using a more representative number of chemical markers should be performed. Copyright © 2012 John Wiley & Sons, Ltd.     

Methylation of Chitosan with Iodomethane: Effect of Reaction Conditions on Chemoselectivity and Degree of Substitution

N,N,N‐trimethylchitosan (TMC) was prepared by reacting purified chitosan with iodomethane, in the presence of sodium hydroxide, water and sodium iodide, at room temperature. The reaction medium was N‐methyl‐2‐pyrrolidone. Different samples of TMC were obtained by adding to the reaction medium a fixed volume (5.5 mL) of aqueous NaOH solutions at different concentrations (15, 20, 30 and 40 wt.‐%) and carrying out the reactions for 9 or 24 h. The features observed in the ¹H and ¹³C NMR spectra of these chitosan derivatives, in respect of the chemical shift, number and relative intensity of the signals, depended strongly on the excess of NaOH and H₃CI added to the reaction medium, but when the lowest excess was employed, the characteristics of the derivative were not affected by the reaction time to the same extent. The average degree of quaternization of these N‐methylated derivatives of chitosan ranged from 10.5% to 44.8%, according to the reaction conditions. Increasing the excess of NaOH, in reactions carried out for 9 h, resulted in TMC samples with progressively higher content of trimethylated sites however, the reaction yields were correspondingly lower and O‐alkylation was favored in these cases.

¹H NMR spectrum of sample [A_X]^24h dissolved in D₂O (C_p = 10 g/L).     

Characterization and adsorption capacity of Brazilian kaolin

Journal of Radioanalytical and Nuclear Chemistry - This study has evaluated chemical, radiological composition and determined the cation exchange capacity (CEC) for three commercially available...     

Novel extracellular polymeric substances produced by Cupriavidus necator IPT 027 grown on glucose and crude glycerol originated from biodiesel

The aim of this study was to evaluate the production and properties of novel extracellular polymeric substances (EPS) from glucose (EPS 1) and crude glycerol (CG) from castor beans oil (EPS 2). Cupriavidus necator IPT 027 cultivated with glucose and CG (35 °C, 150 rpm, 72 hr, pH 7, shaker) produced approximately 1.60 ± 0.01 and 2.83 ± 0.02 g l^?1 EPS, respectively, with high‐molecular weight (3.89 × 10⁵ and 1.89 × 10⁷ Da) and constituted of different functional groups such as uronic acid, monosaccharides (glucose, mannose, arabinose, and fucose) and primary amine group. The composition of the fermentable substrate influenced the melting temperature (221.11 and 230.18 °C), crystallinity (34.36% and 37.11%), degradation temperature (255.06 and 296.62 °C) and morphology. EPS showed pseudoplastic non‐Newtonian fluid behavior in the aqueous solutions, presenting potential applicability biotechnological and industrial mainly in food industry as emulsifiers and biosurfactants. This is the first study on the production and characterization of EPS obtained by C. necator IPT 027 in culture with glucose and CG. Copyright © 2016 John Wiley & Sons, Ltd.     

An efficient microwave assisted synthesis of N′-aryl/(alkyl)-substituted N-(4-hydroxy-6-phenylpyrimidin-2-yl)guanidines: Scope and limitations

Treatment of N-[(4-hydroxy-6-phenyl)pyrimidin-2-yl]cyanamide with 1° alkyl or arylamines in isopropyl alcohol for only 10 min at 110–120 °C under microwave conditions gave the corresponding N′-alkyl(aryl)guanidine derivatives in excellent yields (65–84%). Isolated yields were greatest when >1.0 equiv. of amines were employed, but excellent results were also obtained when aryl and alkylamines were reacted with a more atom-economical loading (1.0 equiv.; 70% and 72% ave. yields, respectively). Arylamines with either highly electron withdrawing substituents (e.g. CO₂H) or pi-deficient heterocycles (e.g. variously substituted aminopyridines) did not work well under these conditions, and reaction with ureas and/or amino acids did not give detectable products. Work-up was exceedingly simple, and involved simple collection and washing of product on a sintered glass funnel. Products were obtained in analytically pure form and required approximately 1 h to prepare, start to finish.     

On the High Viscosity of Aqueous Solution of Lysozyme Induced by Some Organic Solvents

A remarkably high viscosity has been induced in protein aqueous solutions by the addition of certain structurally related organic solvents. The effect has been observed for lysozyme aqueous solutions containing tetramethylurea (TMU), dimethylsulfoxide (DMSO), dimethylformamide, and hexamethylphosphortriamide. The effect has also been induced in ferrocytochrome c aqueous solutions by TMU. Critical concentrations for both the protein and organic solvent were verified for the onset of the viscosity increase. A common feature of the solvents which were able to induce the effect is a dipolar moiety (C=O, S → O and P → O) and a nonpolar region represented by the methyl groups. The resulting fluids show an extremely restricted flow and a typical non-Newtonian, pseudoplastic behavior. Use was made of¹H nuclear magnetic resonance (NMR) and Raman spectroscopy to characterize protein structural modifications and of¹³C NMR to investigate changes in relaxation times and chemical shifts in the solvent/water solutions. A systematic rheological characterization of the systems was undertaken for some of the solvents, and unusual patterns of viscous effects were identified for the solvent/water systems both with and without protein. The process was found to be at least partially reversible, as concluded from the recovered original solution rheological characteristics and the original protein¹H NMR spectrum, after eliminating the organic solvent by ultrafiltration. The whole process was characterized as consisting of two mutually independent stages. The first involves an extensive conformational transition of the polypeptide backbone, from a predominantly α-helical to increased random coiled and β-sheet structures, with the occurrence of nonorthodox protein secondary structures at regions above the solvent critical point. The second stage consists of short-lived interchain contacts leading to an entanglement of the macromolecular system as a whole. A microphase reversion in the organic solvent/water mixture, supported by¹³C NMR and rheological results, is proposed as the driving force causing the observed behavior.     

Potentiometric, luminescence and NMR study of the interaction of Eu with glyceryl phosphates

Complexation of europium(III) with glyceryl-1- and -2-phosphates has been studied by metal ion luminescence, ¹H and ¹³C NMR spectroscopy and potentiometry. From the luminescence and NMR studies, the formation of a 1:1 inner-sphere complex, in which the glyceryl phosphate is directly bound to the metal, is confirmed. Similar apparent binding constants at pH 2 were obtained by the three methods. Values obtained by NMR at pH 2 are 53 M⁻¹ and 12 M⁻¹ for glyceryl-1- and -2-phosphate, respectively. By comparison with literature data on related systems it is suggested that the ligands bind through the phosphate group. To obtain structural information from the NMR data, complexation has also been studied with the lanthanide ions Dy(III), Er(III) and Gd(III) using both chemical shift and relaxation data. From this, metal-proton distance ratios have been calculated. Comparison of ¹H and ¹³C NMR spectral data in the presence of paramagnetic lanthanides suggests conformational equilibria in the solutions. From the potentiometric studies, global formation constants have been determined, and speciation diagrams obtained over the pH range 1.5pH7.0 for ligand/metal ratios of 1 and 30. Implications of these results on lanthanide induced fusion of phospholipid membranes are discussed.