Sur les dérivés de la fluorénone. IX. La (pyridyl-2)-3-fluorénone,la méthyl-2-(pyridyl-2)-3-fluorénone et la méthyl-3-(pyridyl-2)-3-fluorénone

Fluorenone Derivatives. IX. 3-(Pyrid-2-yl)-fluorenone, 2-methyl-3-(pyrid-2-yl)-fluorenone, and 2-(3-methyl-pyrid-2-yl)fluorenone Unsuccessful attempts to synthesize an aza-cis-fluorenacene system starting from 2-aza-chalcone or 6-methyl-2-aza-chalcone led to the title compounds.     

Characterization of synthesized titanium oxide nanoclusters by MALDI-TOF mass spectrometry

Titania represents an important material that has wide applications. The bactericidal efficiency of TiO(2) has been shown to be dependent on the size of the nanoparticles, so it is important to be able to reliably estimate their dimensions. In this study, a stable TiO(2) cluster suspension is produced by the thermal solvent process, and ultrasmall clusters (<1 nm) with different sizes are obtained by size-selection treatment. MALDI-TOF-MS and LDI-TOF-MS are shown to be useful for characterization of these ultrasmall nanoparticles. Peak maxima are found to correlate with nanoparticle size, and the possibility of using these mass spectrometry-based approaches to estimate nanoparticle size is affirmed. The size distributions of TiO(2) nanoparticles obtained from MALDI- and LDI-TOF-MS are in good agreement with parallel TEM observations. Finally, PSD analysis of inorganic nanomaterials is performed and valuable information about the structure of analytes has been obtained.     

Preparation and characterization of p-tert-butylcalix[8]arene bonded capillaries for open-tubular capillary electrochromatography

p-tert-Butylcalix[8]arene bonded capillaries for open-tubular capillary electrochromatography were prepared with γ-glycidoxypropyltrimethoxysilane as a bridge. The bonded capillary displayed low and steady electroosmotic flow (EOF) values over the pH range from 4 to 9. Detection limits for direct spectrophotometric detection at 277 nm for benzenediols (at a signal to noise ratio of 2) were 0.96 mg l⁻¹ for the unbonded capillary and 1.48 mg l⁻¹ for the bonded capillary, showing that the bonded layer did not show significant absorbance and hence decreased sensitivity. The bonded capillaries showed good separation selectivity for o-, m- and p-benzenediols, α- and β-naphthols, and α- and β-naphthylamines. This selectivity was attributed to significant interactions between the analytes and the bonded p-tert-butylcalix[8]arene, which contributed to the electrochromatographic separation mechanism. The bonded capillaries gave high stability and reproducibility.     

Picosecond transient photoreflectance measurements of ion-implanted GaAs

We have used picosecond transient reflectance techniques to measure the near-surface characteristics of ion-implanted GaAs. These non-destructive laser-based diagnostic techniques allow measurement of the modification of near-surface properties at relatively low implant fluences. Photothermal phenomena dominate these results and yield important information concerning the extent of implant-induced materials modification.     

An analysis for the DIIS acceleration method used in quantum chemistry calculations

This work features an analysis for the acceleration technique DIIS that is standardly used in most of the important quantum chemistry codes, e.g. in DFT and Hartree–Fock calculations and in the Coupled Cluster method. Taking up results from Harrison (J Comput Chem 25:328, 2003), we show that for the general nonlinear case, DIIS corresponds to a projected quasi-Newton/secant method. For linear systems, we establish connections to the well-known GMRES solver and transfer according (positive as well as negative) convergence results to DIIS. In particular, we discuss the circumstances under which DIIS exhibits superlinear convergence behaviour. For the general nonlinear case, we then use these results to show that a DIIS step can be interpreted as step of a quasi-Newton method in which the Jacobian used in the Newton step is approximated by finite differences and in which the according linear system is solved by a GMRES procedure, and give according convergence estimates.     

Cadmium sulfide and cadmium phosphide thin films from a single cadmium compound

Aerosol-assisted chemical vapor deposition of Cd[(SP(i)Pr(2))(2)N](2) leads to the growth of cadmium sulfide and/or phosphide thin films on glass. Decomposition of the precursor has been studied by pyrolysis-gas chromatography/mass spectrometry and modeled by density functional theory.     

Small camera as a handheld colorimetric tool in the analytical chemistry

Recently, there is an effort to introduce new types of analytical procedures and handheld assays to provide simple and reliable equipment for the field and household analyses. Development of diagnostic tools for self-diagnosis is another challenge in analytical chemistry. Digital cameras are widely available and cheap, hence they could be the sensor platform for construction of analytical and diagnostic methods. In general, good availability of cameras integrated into smartphones can be easily converted into an analytical tool. This review relates to the use of digital camera in analytical chemistry and there are introduced the facts how digital data can be processed and what the limits of digital photography are. Recent papers in this issue and discussion of development in camera based assays is also provided here.     

Design of a steering control law for an autonomous underwater vehicle using nonlinear $$\mathscr {H}_{\infty }$$ state feedback technique

This paper proposes a new robust nonlinear \(\mathscr {H}_{\infty }\) state feedback (NHSF) controller for an autonomous underwater vehicle (AUV) in steering plane. A three-degree-of-freedom nonlinear model of an AUV has considered for developing a steering control law. In this, the energy dissipative theory is used which leads to form a Hamilton–Jacobi–Isaacs (HJI) inequality. The nonlinear \(\mathscr {H}_{\infty }\) control algorithm has been developed by solving HJI equation such that the AUV tracks the desired yaw angle accurately. Furthermore, a path following control has been implemented using the NHSF control algorithm for various paths in steering plane. Simulation studies have been carried out using MATLAB/Simulink environment to verify the efficacies of the proposed control algorithm for AUV. From the results obtained, it is concluded that the proposed robust control algorithm exhibits a good tracking performance ensuring internal stability and significant disturbance attenuation.     

Three-dimensional free vibration analysis of functionally graded piezoelectric annular plates on elastic foundations

Three-dimensional free vibration analysis of functionally graded piezoelectric (FGPM) annular plates resting on Pasternak foundations with different boundary conditions is presented. The material properties are assumed to have an exponent-law variation along the thickness. A semi-analytical approach which makes use of state-space method in thickness direction and one-dimensional differential quadrature method in radial direction is utilized to obtain the influences of the Winkler and shearing layer elastic coefficients of the foundations on the non-dimensional natural frequencies of functionally graded piezoelectric annular plates. The analytical solution in the thickness direction can be acquired using the state-space method and approximate solution in the radial direction can be obtained using the one-dimensional differential quadrature method. Numerical results are given to demonstrate the convergency and accuracy of the present method. The influences of the material property graded index, circumferential wave number and thickness of the annular plate on the dynamic behavior are also investigated. Since three-dimensional free vibration analysis of FGPM annular plates on elastic foundations has not been implemented before, the new results can be used as benchmark solutions for future researches.     

Crosslinked polydiacetylene and its two- and three-component interpenetrating polymer networks (IPNs)

The synthesis of crosslinked polydiacetylene [poly4ECMU (a polydiacetylene with ethoxy carbonyl methylene urethane substitution): where R = ? (CH₂)₄OCONHCH₂COOCH₂CH₃] was carried out utilizing its polar and flexible substituent groups. Polydiacetylene was crosslinked by the formation of allophanate linkages utilizing urethane groups in the substituent groups of the polydiacetylene. Two-component IPNs of polydiacetylene [poly4BCMU (a polydiacetylene with butoxy carbonyl methylene urethane substitution): where R = ? (CH₂)₄OCONHCH₂COO(CH₂)₃CH₃] and an epoxy resin (diglycidyl ether of Bisphenol A) were synthesized. Two-component IPNs of poly4ECMU with the above epoxy resin were also synthesized. For the first time, two-component stiff-backbone IPNs of two different kinds of polydiacetylene (poly4BCMU and polyECMU) and a three-component IPN of poly4BCMU, poly4ECMU, and the epoxy resin were synthesized. IPNs with fewer allophanate linkages were also made in order to examine morphological differences between them. The glass transition behavior of these networks was studied using differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) by means of a Rheovibron.