Anion selectivity in zwitterionic amide-functionalised metal salt extractants

Amide-functionalised salen ligands capable of extracting metal salts have been synthesised and characterised. Single-crystal X-ray structure determinations of complexes of NiSO4, [Ni(L)(SO4)], confirm that the ionophores are in a zwitterionic form with Ni(II) bound in the deprotonated salen moiety and the SO4(2-) ion associated with protonated pendant N'-amidopiperazine groups. Treatment of [Ni(L)(SO4)] with base removes the protons from the pendant amido-amine group resulting in loss of the SO4(2-) ion and formation of metal-only complexes of type [Ni(L-2H)], which have been characterized by single-crystal X-ray diffraction. Three of the ligands with solubilities suitable for solvent extraction studies show loading and stripping pH-profiles that are suitable for the recovery of CuSO4 or CuCl2 from industrial leach solutions. The copper-only complexes, [Cu(L-2H)], are selective for Cl- over SO4(2-) in both solvent extraction and bulk liquid membrane transport experiments and were found to bind Cl- in two steps via the formation of a 1:1:1 [Cu(L-H)Cl] assembly, followed by a 1:1:2 [Cu(L)Cl2] assembly as the pH of the aqueous phase is lowered. The anion transport selectivity was evaluated for a number of other mono-charged anions and interestingly the ligands were found to display a preference for the Br- ion. To probe the influence of the Hofmeister bias on the selectivity of anion complexation, single-phase potentiometric titration experiments were employed to investigate the binding of SO4(2-) and Cl- by one of the copper only complexes, [Cu(L-2H)] in 95 %/5 % MeOH/water. Under these conditions selectivity was reversed (SO4(2-)>Cl-) confirming that the Hofmeister bias, which reflects the relative hydration energies of the anions, dominates the selectivity of anion extraction from aqueous media into CHCl3.     

Thalassospiramides A and B, immunosuppressive peptides from the marine bacterium Thalassospira sp

[structure: see text] Two new cyclic peptides, thalassospiramides A and B (1 and 2), were isolated from a new member of the marine alpha-proteobacterium Thalassospira. The thalassospiramides, the structures of which were assigned by combined spectral and chemical methods, bear unusual gamma-amino acids and show immunosuppressive activity in an interleukin-5 production inhibition assay (IC50 = 5 muM for thalassospiramide B).     

Insight into the nonlinear absorbance of two related series of two-photon absorbing chromophores

A comprehensive photophysical study of the linear and nonlinear absorption properties has been carried out on two series of two-photon absorbing dyes to gain insight into how structure-property relationships influence observed nonlinear absorption. The materials studied consist of an electron accepting benzothiazole group connected to an electron donating diphenylamine via a fluorene bridging group. Two series differ from each other by the addition of one phenyl group and for each series one-arm (dipolar, AF240 and AF270), two-arm (quadrupolar, AF287 and AF295), and three-arm (octupolar, AF350 and AF380) versions were studied. Overall the AF240 series exhibits higher intrinsic two-photon absorption (TPA) cross-sections than the AF270 series as well as enhanced nanosecond nonlinear absorption, with an increase with number of branches. The enhanced nanosecond nonlinearity is understood by taking into account the contribution from the singlet and triplet excited states and was verified by a two-photon assisted excited-state absorption model that satisfactorily predicts the nonlinear absorption of the chromophores.     

On-chip generation of microbubbles as a practical technology for manufacturing contrast agents for ultrasonic imaging

This paper presents a new manufacturing method to generate monodisperse microbubble contrast agents with polydispersity index (sigma) values of <2% through microfluidic flow-focusing. Micron-sized lipid shell-based perfluorocarbon (PFC) gas microbubbles for use as ultrasound contrast agents were produced using this method. The poly(dimethylsiloxane) (PDMS)-based devices feature expanding nozzle geometry with a 7 microm orifice width, and are robust enough for consistent production of microbubbles with runtimes lasting several hours. With high-speed imaging, we characterized relationships between channel geometry, liquid flow rate Q, and gas pressure P in controlling bubble sizes. By a simple optimization of the channel geometry and Q and P, bubbles with a mean diameter of <5 microm can be obtained, ideal for various ultrasonic imaging applications. This method demonstrates the potential of microfluidics as an efficient means for custom-designing ultrasound contrast agents with precise size distributions, different gas compositions and new shell materials for stabilization, and for future targeted imaging and therapeutic applications.     

High-throughput screening of enzyme inhibition using an inhibitor gradient generated in a microchannel

A new rapid microfluidic method for measuring enzyme inhibition is presented. The assay relies upon the creation of a uniform concentration of substrate and a microfluidically generated concentration gradient of inhibitor using a single microchannel and a single initial inhibitor concentration. The IC(50) values of two enzyme inhibitors were determined using the new technique and validated using a conventional microtiter plate assay. Using both experimental and computational simulation techniques, the assay was shown to be sensitive to inhibitor potency and the distribution of inhibitor in the system. The method has the potential to be more accurate than conventional methods because of the comparatively large amount of data that may be collected. Recommendations for use of the assay are provided, including its use for high-throughput screening in drug discovery and general use in measurement of enzyme inhibition.     

Effect of capillary condensation on friction force and adhesion

Friction force measurements have been conducted with a colloid probe on mica and silica (both hydrophilic and hydrophobized) after long (24 h) exposure to high-humidity air. Adhesion and friction measurements have also been performed on cellulose substrates. The long exposure to high humidity led to a large hysteresis between loading and unloading in the friction measurements with separation occurring at large negative applied loads. The large hysteresis in the friction-load relationship is attributed to a contact area hysteresis of the capillary condensate which built up during loading and did not evaporate during the unloading regime. The magnitude of the friction force varied dramatically between substrates and was lowest on the mica substrate and highest on the hydrophilic silica substrate, with the hydrophobized silica and cellulose being intermediate. The adhesion due to capillary forces on cellulose was small compared to that on the other substrates, due to the greater roughness of these surfaces.     

Osmotically induced morphological changes of extruded dioctadecyldimethylammonium chloride (DODAC) dispersions

Extruded vesicles, which are often used as models for living cells, can change their morphology when they are diluted into a hyperosmotic medium. Different morphological changes were observed with extruded dioctadecyldimethylammonium chloride (DODAC) vesicles after dilution with a nonionic (sucrose) and ionic (CaCl2) osmotic agent above and below the gel-to-liquid crystalline transition temperature. By means of turbidimetry, dynamic light scattering, and cryo-transmission electron microscopy, it was seen that the vesicles only deflated when they were in the gel state, whereas in the liquid crystalline state, an ionic osmotic agent could induce twinning of the vesicles, reminiscent to endocytosis. The latter could occur as a result of the combined effects of reduced repulsion, local dehydration, and reduced bending rigidity induced by the ionic agent.     

Development and application of an ultratrace method for speciation of organotin compounds in cryogenically archived and homogenized biological materials

An accurate, ultra-sensitive and robust method for speciation of mono, di, and tributyltin (MBT, DBT, and TBT) by speciated isotope-dilution gas chromatography-inductively coupled plasma-mass spectrometry (SID-GC-ICPMS) has been developed for quantification of butyltin concentrations in cryogenic biological materials maintained in an uninterrupted cryo-chain from storage conditions through homogenization and bottling. The method significantly reduces the detection limits, to the low pg g(-1) level (as Sn), and was validated by using the European reference material (ERM) CE477, mussel tissue, produced by the Institute for Reference Materials and Measurements. It was applied to three different cryogenic biological materials-a fresh-frozen mussel tissue (SRM 1974b) together with complex materials, a protein-rich material (whale liver control material, QC03LH03), and a lipid-rich material (whale blubber, SRM 1945) containing up to 72% lipids. The commutability between frozen and freeze-dried materials with regard to spike equilibration/interaction, extraction efficiency, and the absence of detectable transformations was carefully investigated by applying complementary methods and by varying extraction conditions and spiking strategies. The inter-method results enabled assignment of reference concentrations of butyltins in cryogenic SRMs and control materials for the first time. The reference concentrations of MBT, DBT, and TBT in SRM 1974b were 0.92 +/- 0.06, 2.7 +/- 0.4, and 6.58 +/- 0.19 ng g(-1) as Sn (wet-mass), respectively; in SRM 1945 they were 0.38 +/- 0.06, 1.19 +/- 0.26, and 3.55 +/- 0.44 ng g(-1), respectively, as Sn (wet-mass). In QC03LH03, DBT and TBT concentrations were 30.0 +/- 2.7 and 2.26 +/- 0.38 ng g(-1) as Sn (wet-mass). The concentration range of butyltins in these materials is one to three orders of magnitude lower than in ERM CE477. This study demonstrated that cryogenically processed and stored biological materials are a promising alternative to conventional freeze-dried materials for organotin speciation analysis, because these are, at present, the best conditions for minimizing degradation of thermolabile species and for long-term archival. Finally, the potential of the analytical method was illustrated by analysis of polar bear (Ursus maritimus) and beluga whale (Delphinapterus leuca) liver samples that had been collected in the Arctic and archived at the Marine Environmental Specimen Bank. Significant concentrations of butyltin compounds were found in the samples and provide the first evidence of the presence of this class of contaminant in the Arctic marine ecosystem. Figure Eye catch image.     

Forward and backward pericyclic photochemical reactions have intermediates in common, yet cyclobutenes break the rules.

Photochemical pericyclic reactions are believed to proceed via a so-called pericyclic minimum on the lowest excited potential surface (S(1)), which is common to both the forward and backward reactions. Such a common intermediate has never been directly detected. The photointerconversion of 1,3-butadiene and cyclobutene is the prevailing prototype for such reactions, yet only diene ring closure proceeds with the stereospecificity that the Woodward-Hoffmann rules predict. This contrast seems to exclude a common intermediate. Using ultrafast spectroscopy, we show that the excited states of two cyclobutene/diene isomeric pairs are linked by not one, but by two common minima, p* and ct*. Starting from the diene side (cyclohepta-1,3-diene and cycloocta-1,3-diene), electrocyclic ring closure passes via the pericyclic minimum p*, whereas ct* is mainly responsible for cis-trans isomerization. Starting from the corresponding cyclobutenes (bicyclo[3.2.0]heptene-6 and bicyclo[4.2.0]octene-7), the forbidden isomer is formed from ct*. The path branches at the first (S(2)/S(1)) conical intersection towards p* and ct*. The fact that the energetically unfavorable ct* path can compete is ascribed to a dynamic effect: the momentum in C=C twist direction, acquired--such as in other olefins--in the Franck-Condon region of the cyclobutenes.     

Transitions in structure in oil-in-water emulsions as studied by diffusing wave spectroscopy

Transitions in structure of sodium caseinate stabilized emulsions were studied using conventional rheometry as well as diffusing wave spectroscopy (DWS). Structural differences were induced by different amounts of stabilizer, and transitions in structure were induced by acidification. Special attention was given to the sol-gel transition. In this study the criterion of the sol-gel transition being frequency independent was verified for emulsions using DWS. It was shown that this sol-gel transition did not correspond to the so-called ergodic-nonergodic transition. Differences, as a function of the pH, were found for emulsions containing different amounts of stabilizer. The emulsion droplets in an emulsion without extra stabilizer formed a continuous network upon acidification, while the droplets in emulsions with an excess of stabilizer formed a network of oil droplets at neutral pH. Upon acidification of the latter one, the initial network of oil droplets fell apart, and eventually a network of sodium caseinate, in which the oil droplets were embedded, was formed. This caused the appearance of two sol-gel transitions. The breaking of the initial network as well as the network formation of sodium caseinate in time was observed by DWS.