Novel Copolymers of Styrene. 12. Halogen Ring-Substituted Methyl 2-Cyano-3-Phenyl-2-Propenoates

Electrophilic trisubstituted ethylenes, halogen ring-substituted methyl 2-cyano-3-phenyl-2-propenoates, RPhCH=C(CN)CO₂CH₃ (where R is 3-Br-4-CH₃O, 5-Br-2-CH₃O, 2-F-5-CH₃, 2-F-6-CH₃, 4-F-3-CH₃, 4-F-3-PhO, 2-F-5-I, 2-F-6-I, 2-F₃C, 4-F₃C) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and methyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 2-F-5-CH₃ (6.4) > 4-F-3-PhO (5.6) > 4-F₃C (4.8) > 3-Br-4-CH₃O (3.7) > 2-F-5-I (3.6) > 2-F₃C (2.2) > 2-F-6-I (2.1) > 5-Br-2-CH₃O (1.9) > 4-F-3-CH₃ (1.8) > 2-F-6-CH₃ (1.2). Relatively high T _g of the copolymers in comparison with that of polystyrene indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200-500°C range with residue (2–21% wt), which then decomposed in the 500–800°C range.     

Comparison of Three Analytical Methods for the Determination of Quinolones in Pig Muscle Samples

This work presents a comparison between three analytical methods developed for the simultaneous determination of eight quinolones regulated by the European Union (marbofloxacin, ciprofloxacin, danofloxacin, enrofloxacin, difloxacin, sarafloxacin, oxolinic acid and flumequine) in pig muscle, using liquid chromatography with fluorescence detection (LC–FD), liquid chromatography–mass spectrometry (LC–MS) and liquid chromatography-tandem mass spectrometry (LC–MS/MS). The procedures involve an extraction of the quinolones from the tissues, a step for clean–up and preconcentration of the analytes by solid-phase extraction and a subsequent liquid chromatographic analysis. The limits of detection of the methods ranged from 0.1 to 2.1 ng g⁻¹ using LC–FD, from 0.3 to 1.8 using LC–MS and from 0.2 to 0.3 using LC–MS/MS, while inter- and intra-day variability was under 15 % in all cases. Most of those data are notably lower than the maximum residue limits established by the European Union for quinolones in pig tissues. The methods have been applied for the determination of quinolones in six different commercial pig muscle samples purchased in different supermarkets located in the city of Granada (south-east Spain).

     

Selenides and diselenides containing oxadiazoles: a new class of functionalised materials

A simple and efficient procedure for the synthesis of a new class of organoselenium liquid crystal compounds was developed. The coupling of aryl bromides with elemental selenium was catalysed using copper oxide nanopowder in the presence of potassium hydroxide employing dimethyl sulfoxide as the solvent. This is the first report of the synthesis and characterisation of liquid crystal-based diselenides. Their mesophases were characterised by polarising optical microscopy and differential scanning calorimetry. Compounds 1, 2 and 4b exhibited the smectic A phase. In addition, these compounds showed weak blue fluorescence in solution (λ_{max. em.} 350–405 nm) and a Stokes shift of around 90 nm.     

Pyrrolic Tripodal Receptors for the Molecular Recognition of Carbohydrates: Ditopic Receptors for Dimannosides

Synthetic ditopic receptors, designed for the molecular recognition of dimannosides, have been prepared by bridging two monotopic units effectively recognizing mannosides with linkers of the appropriate size and flexibility, endowed with hydrogen‐bonding groups. Affinities toward the α and β glycosides of the biologically relevant Manα(1–2)Man disaccharide were measured by NMR spectroscopy and isothermal titration calorimetry (ITC) in polar organic media (30–40 % DMF in chloroform). Significant selectivities and affinities in the micromolar range were observed in most cases, with two newly designed receptors being the most effective receptors of the set, together with a distinct preference of the dimannosides for the (S) enantiomer of the receptor in all cases. A 3D view of the recognition mode was elucidated by a combined NMR spectroscopic/molecular modeling approach, showing the dimannoside included in the cleft of the receptor. Compared to the monotopic precursors, the ditopic receptors showed markedly improved recognition properties, proving the efficacy of the modular receptor design for the recognition of disaccharides.     

Regiospecific synthesis of 1-acetamide-5-methoxy-2-oxindoles in two steps: (Ugi-SN2)/xanthate mediated free radical cyclization

A series of twelve novel 1-acetamide-5-methoxy-2-oxindoles were prepared in moderate to good yields (30–88%) by an Ugi-S_N2 one pot process with a xanthate mediated free radical cyclization. Additionally, Density Functional Theory (DFT) based calculations were performed at UB3LYP/6-311G(d) level in order to rationalize the energy profile of the xanthate mediated free radical cyclization because the benzo-fused γ-lactams (ortho products) were obtained as sole regioisomers over the spiro β-lactams (ipso products).     

On‐line solid‐phase extraction for liquid chromatography–mass spectrometry analysis of pesticides

Public concern about pesticides in food and water has increased dramatically in the last two decades. In order to guarantee consumers’ health and safety, analytical methods that could provide fast and reliable answers without compromising accuracy and precision are required. Sample treatment is probably the most tedious and time‐consuming step in many analytical procedures and, despite the significant advances in chromatographic separations and mass spectrometry techniques, sample treatment is still one of the most important parts of the analytical process for achieving good analytical results. Therefore, over the last years, considerable efforts have been made to simplify the stage and to develop fast, accurate, and robust methods that allow the determination of a wide range of pesticides without compromising the integrity of the extraction process. This review article intends to give a short overview of recently developed on‐line solid‐phase extraction, preconcentration, and clean‐up procedures for the determination of pesticides in complex matrices by liquid chromatography–mass spectrometry techniques.     

Characterization and optimization of heroin hapten-BSA conjugates: method development for the synthesis of reproducible hapten-based vaccines

A potential new treatment for drug addiction is immunization with vaccines that induce antibodies that can abrogate the addictive effects of the drug of abuse. One of the challenges in the development of a vaccine against drugs of abuse is the availability of an optimum procedure that gives reproducible and high yielding hapten-protein conjugates. In this study, a heroin/morphine surrogate hapten (MorHap) was coupled to bovine serum albumin (BSA) using maleimide-thiol chemistry. MorHap-BSA conjugates with 3, 5, 10, 15, 22, 28, and 34 haptens were obtained using different linker and hapten ratios. Using this optimized procedure, MorHap-BSA conjugates were synthesized with highly reproducible results and in high yields. The number of haptens attached to BSA was compared by 2,4,6-trinitrobenzenesulfonic acid (TNBS) assay, modified Ellman’s test and matrix assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS). Among the three methods, MALDI-TOF MS discriminated subtle differences in hapten density. The effect of hapten density on enzyme-linked immunosorbent assay (ELISA) performance was evaluated with seven MorHap-BSA conjugates of varying hapten densities, which were used as coating antigens. The highest antibody binding was obtained with MorHap-BSA conjugates containing 3–5 haptens. This is the first report that rigorously analyzes, optimizes and characterizes the conjugation of haptens to proteins that can be used for vaccines against drugs of abuse. The effect of hapten density on the ELISA detection of antibodies against haptens demonstrates the importance of careful characterization of the hapten density by the analytical techniques described.     

Optical Mechanotransduction with Carbazole‐Based Luminescent Liquid Single‐Crystal Elastomers

Carbazole‐based liquid single‐crystal elastomers (LSCEs) are valuable fluorescent flexible materials to perform optical mechanotransduction under ambient conditions. Indeed, the covalent incorporation of carbazole derivatives into nematic LSCEs allows to tune their luminescence on demand under mechanical control in a quick and reversible fashion. Specifically, the fluorescence intensity for these materials can be switched back and forth in less than a second. Moreover, such a process can be performed several times without detecting any sign of fatigue in the system. In addition, these materials show excellent resistance to aging; 2 years after their preparation they exhibit the very same mechanofluorescent behavior as when freshly prepared. In fact, the here reported fluorescent systems are highly sensitive; the application of a force of 70 mN decreases the fluorescence in the elastomeric material by 7%. Thus, mechanical forces are attractive external stimuli to modulate the fluorescence of nematic elastomers rapidly and reversibly enabling thereby mechanotransduction.

     

Synthesis and Antifungal Activity of New Valine-Azole Hybrids

Russian Journal of General Chemistry - Herein, the synthesis of six new derivatives via molecular hybridization of imidazole or triazole and valine methyl ester as a rational design for accessing...     

Iron/multiwalled carbon nanotube (Fe/MWCNT) hybrid materials characterization: thermogravimetric analysis as a powerful characterization technique

Journal of Thermal Analysis and Calorimetry - Nanomaterials and nanocomposites have gained relevance in science and technology due to their excellent properties. Therefore, the characterization of...