Structural, Infrared, and Magnetic Characterization of the Solid Solution Series Sr2−xPbx(VO)(VO4)2; Evidence of the Pb6sLone Pair Stereochemical Effect

The solid solution Sr_2−xPb_xV₃O₉, 0≤x≤2, was prepared by solid state reactions and characterized by X-ray diffraction, IR spectroscopy, and magnetic susceptibility measurements. Single crystals of the pure strontium phase and mixed Sr/Pb compounds were prepared by high temperature treatment of the respective powder compositions. Pb₂V₃O₉crystals could only be obtained by the electrochemical reduction of molten PbV₂O₆. These crystals were always twinned. The previously reported crystal structure of Sr₂V₃O₉was confirmed. It was refined toR=0.050,R_w=0.057, in space group C2/c,a=7.555(1) Å,b=16.275(2) Å,c=6.948(1) Å,β=119.78(1)°. The single crystal structural studies of the Sr_1.02Pb_0.98V₃O₉and Sr_0.67Pb_1.33V₃O₉members of the series show that the introduction of lead gives rise to a progressively complicated splitting of Sr²⁺/Pb²⁺and the tetrahedral vanadium ion crystallographic sites. As a consequence the vanadium framework distorts and beyond the Sr_0.5Pb_1.5V₃O₉composition the crystal symmetry becomes triclinic. This distortion is ascribed to the stereochemical effect of the 6s²lone pair of Pb²⁺. The crystallographic parameters of Pb₂V₃O₉area=7.598(1) Å,b=16.393(3) Å,c=6.972(2) Å,α=91.38(1)°,β=119.35(1)°,γ=90.47(1)°. Pb₂V₃O₉exhibits a more complex IR spectrum than the monoclinic phases. Despite the similarity between the triclinic and monoclinic phases the magnetic susceptibilities indicate differences in the coupling between V⁴⁺ions at low temperatures.     

Model complexes for metallated polythiophenes: gold(I) and palladium(II) complexes of bis(diphenylphosphino)oligothiophenes

The preparations of two new phosphinothiophene ligands, 3,3'-bis(diphenylphosphino)-2,2'-bithiophene (dppbt; 1) and 3,3' "-dihexyl-3',3' '-bis(diphenylphosphino)-2,5':2',2' ':5' ',2' "-quaterthiophene (hdppqt; 2) are reported. Oxidation of 1 gives 3,3'-bis(diphenylphosphine oxide)-2,2'-bithiophene (3), and the crystal structure of this compound was determined. Pd(II) and Au(I) complexes of these ligands have been synthesized and characterized. Crystal structures of [(dppbt)PdCl(2)] (1-Pd), [(hdppqt)PdCl(2)] (2-Pd), [(dppbt)(AuCl)(2)] (1-Au), and [(hdppqt)(AuCl)(2)] (2-Au) were obtained. [(dppbt)(AuCl)(2)] crystallized in two solid-state forms; crystals grown from CH(2)Cl(2)/Et(2)O show a gold-gold interaction of 3.3221(4) A, but from CH(2)Cl(2)/toluene, the molecule crystallizes as a toluene adduct (1-Au-tol) and does not show any gold-gold interaction. All the complexes were characterized via UV-vis spectroscopy and cyclic voltammetry, and the effect of the metal on the energy of the pi-pi transition and oxidation potential was determined. These data are correlated to the interannular torsion angles in the oligothienyl groups from the crystal structure studies.     

FTIR spectroscopy study of CO adsorption on Pt-Na-mordenite

Different carbonyls are formed after CO adsorption at ambient temperature on a Pt-Na-mordenite (Pt-Na-MOR) sample. Pt(3+)(CO)(2) dicarbonyls (nu(s) at 2205 cm(-1) and nu(as) at 2167 cm(-1)) are decomposed without formation of monocarbonyls. The respective mixed-ligand species, Pt(3+)((12)CO)((13)CO), formed after (12)CO-(13)CO coadsorption, display bands at 2192 and 2131 cm(-1), in excellent agreement with the theoretically calculated values. Pt(2+)-CO species absorb at 2145 cm(-1) and are not able to accept a second CO molecule. Pt(+)-CO carbonyls are characterized by a band at 2111 cm(-1). Under CO equilibrium pressure, these species are converted into dicarbonyls (nu(s) at 2135 cm(-1) and nu(as) at 2101 cm(-1)). The respective mixed-ligand species, Pt(+)((12)CO)((13)CO), manifest bands at 2123 and 2069 cm(-1), in good agreement again with the theory. Different carbonyls of metallic platinum are observed below 2100 cm(-)(1). In addition, weakly adsorbed CO was registered as Na(+)-CO complexes (2177 and 2165 cm(-1)) and Na(+)-OC-Na(+) species (2138 cm(-1)). It was found that during desorption of CO platinum was reduced, ultimately to metal. However, heating in a NO + O(2) mixture leads to reoxidation of the metal particles and restoration of the initial state of the sample.     

The crystal and molecular structure of tris[(triphenylstannyl)methyl]methane

The title compound, C₅₈H₅₂Sn₃, belongs to the triclinic space group P$\text{1}$, with a 10.165, b 13.365, c 18.670 Å, α 96.28, β 93.88, γ 103.15°, V = 2443.8 ų, f_w = 1105.1, Z = 2, D_calc 1.501 g cm^?3, m.p. 206.5–208°C, λ(Mo-K_$\text{α}$) 0.71069 Å. The structure was refined on 2684 nonzero reflections to an R factor of 0.044. The crystal contains molecules in which the (SnCH₂)₃CH core possesses an approximate C₃ symmetry. The three SnC(H₂) bonds are gauche to the C(4)-H bond. Repulsive interactions involving the bulky Ph₃Sn substituents lead to large SnC(H₂)C(H) angles (av. 117.3°), whereas the C(H₂)C(H)C(H₂) angles at the tertiary carbon average 111.3°. Little distortion of the Ph₃Sn groups themselves is present, since the PhSnPh angles (av. 109.8°) are almost equal to the C(H₂)SnPh angles (av. 109.9°). The molecule as a whole has no symmetry because the aromatic rings in the three Ph₃Sn groups have different orientations. The phenyl groups create a pocket in the middle of the molecule which encloses and shields the tertiary hydrogen atom. The resulting inaccessibility of this hydrogen accounts in part for the low reactivity of the title compound in redox reactions.     

Structural characterization of phosphatidylcholines by atmospheric pressure photoionization mass spectrometry

The potential of atmospheric pressure photoionization was investigated for the structural analysis of phosphatidylcholine lipids (PCs). [M+H]+ ions of high abundance were obtained, along with several fragment ions. Three of these dissociation products corresponded to quite unusual fragmentation pathways but allowed the determination of both the nature and the position on the glycerol backbone (sn-1 or sn-2) of the fatty acyl chains. The loss of a methyl group from the choline head was also observed. These results suggest a complex ionization mechanism in APPI. However, this method proved to be very powerful for the rapid structural analysis of PC species without using MS/MS experiments.     

A study of background signals in graphite-furnace atomic absorption spectrometry

The non-specific absorption from inorganic and organic molecules between 190 and 400 nm are measured using a graphite furnace and an atomic absorption spectrometer with a deuterium source.The molecular absorption spectra of NaCl, KCl, RbCl and CsCl are very similar, with two maxima at ca. 200 and 250 nm. That of LiCl is very weak, as is that of NaF. The spectra of NaBr, NaI, KBr, KI, CaCl₂, MgCl₂, SrCl₂, FeCl₃, LaCl₃ are also reported.The non-specific absorption spectrum arising from albumin decreases fro 190 to 400 nm, and that for plasma is similar to albumin, although a contribution from inorganic salts can also be seen. To decrease the non-specific absorption from metal chlorides or biological samples of mainly inorganic composition such as urine, addition of HNO₃ is satisfactory. Oxygen introduction during low temperature charring is better for removing contribution from organic molecules.     

Microwave-assisted ring-closing metathesis revisited. On the question of the nonthermal microwave effect

The ring-closing metathesis reactions (RCM) of six standard diene substrates leading to five-, six-, or seven-membered carbo- or heterocycles were investigated under controlled microwave irradiation. RCM protocols were performed with standard Grubbs type II and a cationic ruthenium allenylidene catalyst in neat and ionic liquid-doped methylene chloride under sealed vessel conditions. Very rapid conversions (15 s) were achieved utilizing 0.5 mol % Grubbs II catalyst under microwave conditions. Careful comparison studies indicate that the observed rate enhancements are not the result of a nonthermal microwave effect.     

Synthesis, linear, and quadratic-nonlinear optical properties of octupolar D3 and D2d bipyridyl metal complexes

A series of D3 (Fe(II), Ru(II), Zn(II), Hg(II)) and D2d (Cu(I), Ag(I), Zn(II)) octupolar metal complexes featuring different functionalized bipyridyl ligands has been synthesized, and their thermal, linear (absorption and emission), and nonlinear optical (NLO) properties were determined. Their quadratic NLO susceptibilities were determined by harmonic light scattering at 1.91 microm, and the molecular hyperpolarizability (beta0) values are in the range of 200-657 x 10(-30) esu for octahedral complexes and 70-157 x 10(-30) esu for tetrahedral complexes. The octahedral zinc(II) complex 1 e, which contains a 4,4'-oligophenylenevinylene-functionalized 2,2'-bipyridine, exhibits the highest quadratic hyperpolarizability ever reported for an octupolar derivative (lambdamax=482 nm, beta1.91(1 e)=870 x 10(-30) esu, beta0(1 e)=657 x 10(-30) esu). Herein, we demonstrate that the optical and nonlinear optical (NLO) properties are strongly influenced by the symmetry of the complexes, the nature of the ligands (donor endgroups and pi linkers), and the nature of the metallic centers. For example, the length of the pi-conjugated backbone, the Lewis acidity of the metal ion, and the increase of ligand-to-metal ratio result in a substantial enhancement of beta. The contribution of the metal-to-ligand (MLCT) transition to the molecular hyperpolarizability is also discussed with respect to octahedral d6 complexes (M=Fe, Ru).