Copper(I) hexafluoroantimonate - an example of a compound with Cu in a solely fluorine environment

Yellow-orange single crystals of CuSbF₆, were prepared by reacting Cu wire (∼10 mmol) with SbF₅ (∼3 mmol) in liquid anhydrous hydrogen fluoride (aHF) and by reduction of Cu(SbF₆)₂ with Cu metal in aHF. CuSbF₆ crystallizes rhombohedral at 296 K with the LiSbF₆ structure type, with a = 530.4(4) pm, c = 1453(1) pm and Z = 3, space group R (no. 148). The structure is dominated by isolated layers of regular [SbF₆]⁻ octahedra and Cu⁺ cations.An attempt to prepare CuF by reaction between CuSbF₆ and CsF in aHF at ∼190 K failed. Instead of CuF, a mixture of Cu and CuF₂ was obtained.     

Simultaneous liquid chromatographic determination of seventeen of the major monoamine neurotransmitters, precursors and metabolites. I. Optimization of the mobile phase using factorial designs and a computer program to predict chromatograms

Utilizing reversed-phase high-performance liquid chromatography (HPLC) with electrochemical detection and optimization of the mobile phase using factorial designs and a constructed computer program to predict chromatograms, it has been possible to obtain a satisfactory resolution of seventeen of the major monoamine neurotransmitters, precursors and metabolites. A rapid (less than 25 min) isocratic system for the simultaneous determination of 3,4-dihydroxyphenylalanine, dopamine, dihydroxyphenylacetic acid, 3-methoxytyramine, homovanillic acid, norepinephrine, normetanephrine, 3,4-dihydroxyphenylethylene glycol, 3-methoxy-4-hydroxyphenylethylene glycol, epinephrine, metanephrine, vanillylmandelic acid, 5-hydroxytryptophan, serotonin, 5-hydroxytryptophol and 5-hydroxyindoleacetic acid in addition to the internal standard isoproterenol is presented. The optimization strategy included selection of variables to optimize by a reduced factorial design a detailed study of these variables by a complete factorial design, theoretical predictions of chromatograms by a constructed computer program and test on the HPLC system. This optimization strategy can easily be applied to any problem of solute separation by liquid chromatography.     

Nanostructure evolution studies of bulk polymer materials with synchrotron radiation: progress in method development

The prospects of a modern analysis of nanostructure evolution during the processing of polymer materials by means of scattering from synchrotron radiation are demonstrated in examples. The beam sources have gained stability, shortages are located in beamline setups and in method development for the quantitative analysis of voluminous data sets.By using the proposed multidimensional chord distribution function (CDF) analysis method, nanostructure information from small-angle X-ray scattering (SAXS) data are extracted and visualised. The method can be automated if the beamline setup is able to deliver a full data set with simple constraints. In this case even a simultaneous data evaluation is possible (while one pattern is accumulated, the previous one is analysed). The advantages of the method are demonstrated in a study of the straining of a thermoplastic elastomer. The possibilities of an automated analysis are demonstrated in an investigation of the crystallisation behaviour of high-pressure injection-moulded polyethylene (HPIM-PE). The achievable results of nanostructure analysis of polymer materials are discussed. It is shown that the time-resolved SAXS of polymer materials studied during a transformation and analysed by the CDF method is not just a powerful tool to investigate the relationship between structure and properties of materials; the information that can be gained concerning the processes that control nanostructure evolution is equally important. In the future the enlightenment of such relationships may help to tailor polymer materials with respect to their properties and, beyond that, to improve assessments concerning their aging.     

Stability of Copper(II), Nickel(II) and Zinc(II) Binary and Ternary Complexes of Histidine,Histamine and Glycine in Aqueous Solution

The binary and mixed-ligand complexes formed between ligands (histidine (His), histamine (Him) and glycine (Gly)) and some transition metals (Cu(II), Ni(II) and Zn(II)) were studied potentiometrically in aqueous solution at (25.0 ± 0.1) C and I = 0.10 M KCl in order to determine the protonation constants of the free ligands and stability constants of binary and ternary complexes. The complexation model for each system has been established by the software program BEST from the potentiometric data. The most probable binding mode for each binary species of histidine and for all mixed species was also discussed based upon derived equilibrium constants and stability constants related to the binary species. The ambidentate nature of the histidine ligand, i.e. the ability to coordinate histamine-like, imidazolepropionic acid-like and glycine-like modes was indicated from the results obtained. The stability of ternary complexes was quantitatively compared with their corresponding binary complexes in terms of the parameters, log K, log X and ₁₁₁₀. The concentration distributions of various species formed in solution were also evaluated. In terms of the nature of metal ion, the complex stability follows the trend Cu(II) > Ni(II) > Zn(II), which is in agreement with the Irving-Williams order of metal ions. Thus, the results obtained were compared and evaluated with those in the literature.     

Development and validation of an analytical method for detection of estrogens in water

An analytical procedure enabling routine analysis of four environmental estrogens at concentrations below 1 ng L^–1 in estuarine water samples has been developed and validated. The method includes extraction of water samples using solid-phase extraction discs and detection by gas chromatography (GC) with tandem mass spectrometry (MS–MS) in electron-impact (EI) mode. The targeted estrogens included 17- and 17-estradiol (aE2, bE2), estrone (E1), and 17-ethinylestradiol (EE2), all known environmental endocrine disruptors. Method performance characteristics, for example trueness, recovery, calibration, precision, accuracy, limit of quantification (LOQ), and the stability of the compounds are presented for each of the selected estrogens. Application of the procedure to water samples from the Scheldt estuary (Belgium – The Netherlands), a polluted estuary with reported incidences of environmental endocrine disruption, revealed that E1 was detected most frequently at concentrations up to 7 ng L^–1. aE2 was detected once only and concentrations of bE2 and EE2 were below the LOQ.Presented at the 9th FECS Conference on Chemistry and the Environment, Bordeaux, France, 29 August–1 September 2004     

Thermal degradation of copolymers of styrene with dicarboxylic acids - II: Copolymers obtained by radical copolymerisation of styrene with maleic acid or fumaric acid

Thermal degradation processes in copolymers of styrene with two stereoisomers of 1,2-ethylenedicarboxylic acids (i.e. maleic acid (the cis-isomer) and fumaric acid (the trans-isomer)) have been studied by mass spectrometry, FTIR and TG measurements. The influence of the chemical composition on thermal degradation of copolymers with acid by non-isothermal thermogravimetric analysis (TG) was also studied. The stereo-configuration of carboxyl groups in copolymers was analysed by potentiometric titration. It was found that copolymers degrade in two main complex stages. The initial step in the decomposition involves the formation of cyclic five-membered anhydrides. The presence of trans configuration of carboxyl groups hinders the formation of cyclic anhydrides and shifts the decomposition to higher temperatures, making decarboxylation competitive. At higher temperatures anhydride decomposition takes place and finally the degradation of main chains occurs.     

Thermostability of landscape phage probes

Immunoassays have traditionally relied on antibodies as diagnostic probes. Their use outside of a laboratory, however, may be problematic because antibodies are often unstable in severe environmental conditions. Environmental monitoring requires thermostable probes, such as landscape phage, that carry thousands of foreign peptides on their surfaces, are superior to antibodies, and can operate in non-controlled conditions. While parent wild-type phage are known to be extremely stable in various media at high temperatures, no work has been done to demonstrate the stability of landscape phage probes. We examined the thermostability of a landscape phage probe and a monoclonal antibody specific for -galactosidase in parallel in an enzyme-linked immunosorbent assay (ELISA) format. They were both stable for greater than six months at room temperature, but at higher temperatures the antibody degraded more rapidly than the phage probe. Phage retained detectable binding ability for more than six weeks at 63 °C, and three days at 76 °C. The activation energy of phage degradation was determined to be 1.34×10⁵ J/mol. These results confirm that phage probes are highly thermostable and can function even after exposure to high temperatures during shipping, storage and operation.     

High-performance liquid chromatographic separation of gangliosides, combined with immunological detection and fast atom bombardment mass spectrometric characterization

A complete strategy for the isolation of individual mono- and disialogangliosides has been elaborated. We have used straight-phase silica gel chromatography or partitioning to obtain a crude ganglioside fraction. This fraction was then peracetylated and run through a second silica gel column. After anion-exchange chromatography the gangliosides were separated by straight-phase high-performance liquid chromatography with chloroform-methanol-water mixtures as eluting solvents. The method is suitable for preparative isolation of gangliosides and subsequent structural characterization by thin-layer chromatography-enzyme-linked immunosorbent assay, fast atom bombardment mass spectrometry and/or gas chromatography-mass spectrometry, which is demonstrated by several examples, including the separation of GalNAc-II3NeuAc-GgOse4Cer from GalNAc-isoII3NeuAc-GgOse4Cer.     

Convenient and High-Yielding Preparations of Mono(5-carboxy-2-ethylpentyl) Phthalate and its Ring-Deuterated Isomer – The “Third” Major Metabolite of Bis(2-ethylhexyl) Phthalate

Summary. The synthesis of an oxidative major metabolite of bis(2-ethylhexyl) phthalate is described. The target molecule and its ring-deuterated isomer were obtained via acylation of the appropriate -hydroxy benzyl ester or the corresponding carboxylate with phthalic anhydride or phthalic anhydride-d₄. All transformation steps proceed with high yields.