Development of the Bogolyubov-Mitropol'skii method of integral manifolds

A survey is presented of some results relating to the development of the Bogolyubov-Mitropol'skii method of integral manifolds.Translated from Ukrainskii Matematicheskii Zhurnal, Vol. 44, No. 1, pp. 33–46, January, 1992.     

A Simulation Study of Due-date Assignment Rules in a Dynamic Job Shop

This paper is a report of a simulation study that investigates a dynamic approach to scheduling jobs in a multi-machine job shop. The workload information of a job is used in different forms to evaluate the shop performance based on three measures: mean job lateness, percentage of tardy jobs and lateness variance. Different combinations of due-date assignment methods and sequencing rules are compared based on specific performance criteria. The results indicate that using the cumulative distribution function of workload information can yield a better performance than using a proportional function of workload information or ignoring shop congestion information. A few situations are identified in which workload information is not critical.     

Complexation thermodynamics of free and graft oligomers with complementary polymers

The dilute solution complexation equilibrium between linear macromolecules and smaller complementary oligomers is considered when: (1) the oligomers are free in solution; and (2) the oligomers are covalently attached at one end to the polymer. A general statistical mechanical framework is developed and is illustrated using a simple random walk model for polymer conformation. The statistical mechanical partition functions are formulated using a generating function technique, allowing thermodynamic averages in the complexed state to be calculated. Loops, trains, and tails of all possible length are allowed in the conformation of a complexed oligomer. Simulation results for the free oligomer case are compared with those obtained for oligomers covalently attached to the polymeric molecular. The model provides a theoretical explanation for the experimentally observed enhancement of complexation of oligomers grafted to the complementary polymers.     

Dielectric relaxation of a short molecule in a liquid-crystalline solvent

Dielectric relaxation measurements of 5 mole % 4-n-hexyloxycyanobenzene (I) dissolved in 4-n-pentyloxyphenyl-trans-4-n-octylcyclohexylcarboxylate (II) were carried out from 1 kHz to 10 MHz in the nematic, smectic A and smectic B phases. The relaxation frequency of I parallel to the director is about 05 MHz in the S_Bphase and increases rapidly at the transition from S_B to S_A.     

Evaluation of peroxyoxalate chemiluminescence postcolumn detection of fluphenazine in urine and blood plasma using high performance liquid chromatography

Peroxyoxalate chemiluminescence may be used for sensitive postcolumn detection of phenothiazine analytes separated by high performance liquid chromatography with appropriate optimization of measurement conditions such as solvent, pH and oxalate ester. Detectability of fluorescent analytes by chemical excitation varies greatly, but analytes with low oxidation potentials are generally more readily detected at low levels, as demonstrated for phenothiazines, an important class of fluorescent drugs. Some improvement in detection limits is observed for fluphenazine when chemiluminescence detection is compared to conventional fluorescence detection. Because of the specificity of chemical excitation, fewer interferences from fluorescent impurities in a urine matrix are observed.     

All-fibre optical system for exciting and detecting the vibration of silicon microresonator sensors

An all-fibre optical system for optical interrogation and detection of the vibrations of a silicon microresonator is reported. Metal-coated silicon microresonators are excited by intensity modulated laser light delivered through an optical fibre, while the vibration of the resonators is detected by an optical fibre interferometer. Measurements have shown that an average optical power of 10 μW is sufficient to maintain the flexural vibration of the resonator. When the resonator is used as a pressure sensor, its resonant frequency changes from 62 kHz to 130 kHz as the pressure varies from -0°6 bar to 1 bar (gauge). A silicon resonator with 700 nm aluminium coating functions as a temperature sensor, showing a frequency shift from 262 kHz to 251 kHz when the temperature changes from 25 °C to 80 °C.     

Capabilities and limits of ICP-MS for direct determination of element traces in saline solutions

An ICP-MS method for the determination of ultra-traces of 24 Elements (Li, Be, Mg, Al, Cr, Mn, Co, Zn, Cu, Ga, As, Se, Rb, Sr, Mo, Ag, Cd, Sn, Sb, Ba, Tl, Pb, Bi, U) at ng/L to μg/L levels in highly saline solutions (up to 30 g/L NaCl) was developed. Calculated to the salt content of the samples, limits of detection at the sub-μg/kg level were obtained. This allows the measurement of samples like sea water, or clinical samples like urine, serum and whole blood, with few or without sample preparation and a drastic improvement to the limits of detection. Compared to the determination in solutions of 1 g/L NaCl the limits of detection in the original sample were improved by one order of magnitude. Improvements in instrumental stability are achieved by the use of an additional gas, that is introduced to the aerosol stream and avoids salt deposition in the aerosol tube of the torch, the use of High Matrix Content (HMC) cones, that show no clogging even at NaCl-concentrations up to 50 g/L. With this setup the long term stability for measurements with changing matrix concentrations is < 10% without and < 5% with use of an internal standard for the individual samples. Cleaning up is necessary after 2 days of operation. The direct analysis of the Nearshore Seawater Reference Material NRC-CNRC CASS3 showed a good agreement with the certified and measured concentrations. Elements, that do not suffer from an isobaric overlap of matrix compounds can be determined clearly at ng/L levels. Measurement of different matrix concentrations showed, that acceptable results can be achieved with a single calibration for concentrations from 5 g/L NaCl to 30 g/L NaCl, though matrix matching shows the best results.     

Electronic phase separation in a low-temperature tetragonal phase of lanthanum-strontium cuprates according to 139La NQR data

A nonuniform electron density distribution is observed in La_{1−x− y} Nd_ySr_xCuO₄ and La_1−x−y Eu_ySr_xCuO₄, and long-lived magnetic fluctuations in these compounds are studied. The dynamics of the magnetic fluctuations depends strongly on the magnetic properties of the rare-earth ions, which stabilize the low-temperature tetragonal phase. Pis’ma Zh. éksp. Teor. Fiz. 67, No. 5, 344–349 (10 March 1998)     

Change in the nature of the Ni diffusion mechanism on the Si(111) surface with adsorption of Co atoms

The diffusion of Ni on a Si (111) surface is investigated by LEED and Auger electron spectroscopy. It is found that, in contrast to the process on the initially clean Si (111)−7×7 surface, on Si (111) surfaces with submonolayer Co coverages the nature of the Ni transport mechanism changes at a temperature of about 750 °C, and the Ni surface diffusion coefficients increase sharply below this temperature. Pis’ma Zh. éksp. Teor. Fiz. 66, No. 9, 611–614 (10 November 1997)