Comparative Evaluation of Pumice Stone as an Alternative Immobilization Material for 1,3-Propanediol Production from Waste Glycerol by Immobilized Klebsiella pneumoniae

In this study, pumice stone (PS), which is a vastly available material in Turkey, was evaluated as an alternative immobilization material in comparison to other commercially available immobilization materials such as glass beads and polyurethane foam. All immobilized bioreactors resulted in much better 1,3-propanediol production from waste glycerol in comparison to the suspended cell culture bioreactor. It was also demonstrated that the locally available PS material is as good as the commercially available immobilization material. The maximum volumetric productivity (8.5?g?L^?1?h^?1) was obtained by the PS material, which is 220?% higher than the suspended cell system. Furthermore, the immobilized bioreactor system was much more robust against cell washout even at very low hydraulic retention time values.     

Three-Body Recombination Rates Near a Feshbach Resonance within a Two-Channel Contact Interaction Model

We calculate the three-body recombination rate into a shallow dimer in a gas of cold bosonic atoms near a Feshbach resonance using a two-channel contact interaction model. The two-channel model naturally describes the variation of the scattering length through the Feshbach resonance and has a finite effective range. We confront the theory with the available experimental data and show that the two-channel model is able to quantitatively describe the existing data. The finite effective range leads to a reduction of the scaling factor between the recombination minima from the universal value of 22.7. The reduction is larger for larger effective ranges or, correspondingly, for narrower Feshbach resonances.     

Ripple formation in weakly turbulent flow

The formation of granular ripples under liquid shear flow in an annular channel is studied experimentally. The erodible granular bed is subject to weakly turbulent flows without a defined sharp boundary layer close to the granular bed. The flow field and the degree of turbulence is characterized quantitatively by using a particle image velocimeter and a laser-Doppler velocimeter, respectively. A new range of particle Reynolds numbers at the lower limit of the Shields diagram were explored. Quantitative measurements of the granular flow on the surface reveal that the threshold for particle motion coincides within the order of one percent with the threshold for ripple formation. In fully developed ripples it was found that on the leeward side of the ripples regions of low-velocity gradients exist where granular motion is scarce, indicating that the coupling between the ripples is mainly caused by the flow field of the liquid.     

Film flow over strongly undulated bottom profiles at low Reynolds numbers – Analytical results

Film flows occur in many technical processes (e.g. coating techniques) as well as in nature. In this paper we establish a new analytical method in order to calculate both the velocity field and the surface shape of a two–dimensional gravity driven film flow of a Newtonian fluid down a periodically varying bottom topology. We discuss the special case of a sinusoidal bottom shape.     

A simple model of the classicalZitterbewegung: Photon wave function

We propose a simple classical model of the zitterbewegung. In this model spin is proportional to the velocity of the particle, the component parallel top is constant and the orthogonal components are oscillating with2p frequency. The quantization of the system gives wave equations for spin,0, 1/2, 1, 3/2,…, etc. respectively. These equations are convenient for massless particles. The wave equation of the spin-1, massless free particle is equivalent to the Maxwell equations and the state functions have a probability interpretation and exhibit conserved current densities. The ground state has zero energy.     

Numerical analysis of fluid flow and mass transfer in a channel with a porous bottom wall

The flow of a solution between parallel plates is considered. The bottom plate is porous, while the top one is an impermeable solid. A computer program based on the control volume approach was developed to analyse the flow and concentration fields. The effects of the slip at the porous wall on the velocity and particle concentration distributions were investigated. It was observed that as the slip increases, the concentration on the porous wall decreases and the maximum velocity moves towards the porous wall. The concentration on the porous wall increases in the flow direction. This increase in the particle concentration along the porous wall may cause a reduction of the porosity and hence a variation in the suction rate along the porous wall. In order to take this effect into account, a linearly varying transverse velocity along the porous wall was considered. The results were compared with the data available in the literature.     

FT-IR Spectroscopic Study of M(1,2-Ethanedithiol)Ni(CN)4·Benzene (M=Co,Cd) Clathrates

New Hofmann-ethanedithiol-type clathrates, M(1,2-Ethanedithiol)Ni(CN)₄·Benzene (M=Cd,Co), have been obtained in the powdered form. By vibrational spectroscopy of these two new compounds, it is exhibited that their structures are similar to those of the other Hofmann-type clathrates.     

A study on ester formylhydrazones

A series of ester formylhydrazones 2 were synthesized from the reaction of alkyl imidate hydrochlorides 1 with formylhydrazine. Treatment of 2 with hydrazine hydrate, ethyl carbazate and tert-butyl carbazate led to the formation of 3-alkyl-4-amino-, 3-alkyl-4-ethoxycarbonylamino- and 3-alkyl-4-tert-butoxycar-bonylamino-4H-1,2,4-triazoles 3–5 , respectively. Reaction of compounds 2 with formylhydrazine gave N,N'-diformylhydrazine 6 . Compounds 2 were reacted with 2,5-dimethoxytetrahydrofuran to afford 3-alkyl-4-(1H-pyrrol-1-yl)-4H-1,2,4-triazoles 8 .     

Optimization of ilmenite flotation process in the presence of microwave irradiation

In the present study, the effect of parameters, including microwave irradiation power, pH, dosage of chemical reagents (collector, depressant and activator) were studied by microflotation (in Hallimond tube) process. The mechanical flotation tests were carried out on optimum parameters obtained from microflotation tests. The software based on experimental design method (DX7) with the two-level full factorial design was applied to determine the parameter effects and to optimize the microflotation recovery. The optimum conditions were determined by analysis of variance (ANOVA), indicating that the irradiation power was the most effective parameter. The optimum values of parameters in the microflotation process are as follows: power of microwave (1000 W), pH (6.3), dosage of chemical reagents (sodium oleate 3.65 × 10^-4 M as a collector, acidified sodium silicate 2 g L^–1 as a depressant, and lead(II) nitrate 2.1 × 10^–5 M as an activator). By applying these optimized parameters, a product with ilmenite recovery of 83.26% was predicted by the software. The results of microflotation tests indicated that an ilmenite recovery of 82.35% was achieved being very close to the predicted value. The results of mechanical flotation based on optimized condition showed that the recovery and separation efficiency of irradiated ilmenite were improved up to 86.03% and 48.61%, respectively, indicating the positive effect of irradiation on ilmenite floatability.