Gamma-radiation effects on the reduction of hematite to iron in the graphite-iron(III) oxide system

The effects of⁶⁰Co-gamma radiation and of various sample composition on the reduction of hematite to iron in the graphite-iron(III) oxide system in air were studied using isothermal and dynamic TG techniques. Kinetic analysis of isothermal data were performed according to various theoretical models of heterogeneous reactions and the results showed that the three-dimensional phase boundary model gives the best fit of data. Analysis of dynamic TG data were made using Ozawa integral method, Coats-Redfern method and a composite method based on the modified Coats and redfern equation. The activation parameters were calculated and the results of the different methods were compared and discussed.Radiation apparently did not introduce a change in the reaction model or mechanism. However, there is a decrease in activation energy and frequency factor upon irradiation and a decrease in the half-life time of the reaction which is remarkable at the higher temperatures and higher doses.

---

Zusammenfassung Mittels isothermer und dynamischer TG wurde im Graphit-Eisen(III)oxidsystem in Luft der Einfluß von⁶⁰Co-Gammastrahlung und von verschiedenen Probenzusammensetzungen auf die Reduktion von Hämatit zu Eisen untersucht. Entsprechend verschiedener theoretischer Modelle heterogener Reaktionen wurde eine kinetische Analyse der isothermen Daten durchgeführt und die Ergebnisse zeigten, daß das dreidimensionale Phasengrenzenmodell die beste Übereinstimmung liefert. Die Analyse der dynamischen TG-Daten wurde mittels der Integralmethode von Ozawa, der Coats-Redfem-Methode und einer zusammengesetzten Methode auf der Grundlage der modifizierten Coats und Redfern Gleichung durchgeführt. Die Aktivierungsparameter wurden berechnet und die Ergebnisse der verschiedenen Methoden miteinander verglichen und diskutiert.Strahlung scheint keine Änderung des Reaktionsmodelles oder des Mechanismus hervorzurufen. Durch Bestrahlung gibt es aber ein Absinken der Aktivierungsenergie und des Frequenzfaktors sowie ein Absinken der Halbwertszeit der Reaktion, was bei höheren Temperaturen und höherer Dosis bemerkenswert groß ist.

     

Oscillating repulsive force between macroscopic surfaces as a consequence of the fluctuation of the density in the gap region

We try to explain the short-range repulsive force between surfaces as a consequence of a decrease in the configurational entropy of liquid molecules in the gap region as the width of the gap decreases. A simple model shows that the density has an oscillating variation when the surfaces are pushed towards each other. As a consequence, an oscillating repulsive force appears between the macroscopic surfaces, which is the result of a loss of configurational freedom of the liquid molecules because of their orientation in the gap. Received: 14 August 2000 Accepted: 30 January 2001     

Mechanical and physico-chemical characterization of cyclodextrin finished polyamide fibers

We present the study of the cyclodextrin (CDs) finishing of polyamide fibers (PA) by means of citric acid (CTR) as crosslinking agent. We observed that the mode of grafting happened by the formation of a crosslinked polymer formed between CTR and CDs. This polymer physically adhered to the fibers network and was resistant to hot water washings. Modified fibers were characterized by evaluating the contact angle with a polar liquid and by studying the hysteresis of damping of PA fibers (Cahn balance) with various grafting rates and by studying the absorptivity of grafted fabrics via the technique of the posed drop (Digidrop^® instrument). Then a mechanical characterization of the PA fabrics grafted with various proportions of CDs was accomplished, by traction and tear tests by using a tensile-test bench Lohmergy. Finally a topographic study of PA grafted surfaces was approached by atomic force microscopy (AFM and LFM; contact and non-contact mode) which permitted to evaluate the roughness and the chemical heterogeneity of the grafted surfaces.     

Zirconium(IV)-porphyrins as novel ionophores for fluoride-selective polymeric membrane electrodes

The feasibility of using Zr(IV)-porphyrins as novel ionophores for preparing anion-selective polymeric membrane electrodes is examined. Electrodes constructed using o-nitrophenyl octyl ether plasticized poly(vinyl chloride) membranes containing Zr(IV)-octaethylporphyrin (OEP) dichloride (Zr(IV)[OEP]Cl₂) or Zr(IV)-tetraphenylporphyrin (TPP) dichloride (Zr(IV)[TPP]Cl₂) were found to exhibit enhanced potentiometric selectivity toward fluoride compared to electrodes based on a typical anion-exchanger (e.g. tridodecylmethylammonium chloride). At pH 5.5, the electrodes displayed the following selectivity sequences: ClO₄⁻ > SCN⁻ > I⁻ > F⁻ > NO₃⁻ > Br⁻ > NO₂⁻ > Cl⁻ and F⁻ > ClO₄⁻ > SCN⁻ > I⁻ > NO₂⁻ > NO₃⁻ > Br⁻ > Cl⁻ for membranes doped with Zr(IV)[OEP]Cl₂) and Zr(IV)[TPP]Cl₂, respectively. Both ionophores are shown to operate via a charged carrier mechanism, with 10 mol% of lipophilic tetraphenylborate derivative in the membrane phase required to achieve optimal selectivity. Electrodes prepared with both metalloporphyrin species display super-Nernstian response toward fluoride with slopes typically greater than −100 mV per decade. It is shown, via UV-VIS spectroscopy of the membrane phase, that this behavior occurs due to spontaneous formation of hydroxide ion bridged porphyrin dimers in the membrane in the presence of the lipophilic anionic additive. The dimers are easily converted to monomeric species upon increasing the concentration of fluoride in the sample solution. Decreasing the pH of sample buffer background solution (from pH 5.5 to pH 3) decreases the lower detection limit (DL) of the electrode response toward fluoride (by two-order of magnitude) and improves the electrodes’ selectivity.     

Gibbs functions for transfer of divalent metal cations from water to water + methanol mixtures using potentiometry, polarography and solubility measurements

Gibbs functions for transfer from water to methanol and to a full range of water + methanol mixtures were obtained for Cu²⁺, Cd²⁺, Pb²⁺, Hg²⁺, Zn²⁺, Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ using potentiometric or polarographic measurements in these solvents. In addition, data were obtained from the solubility products of the alkaline-earth iodates. From values obtained by the different methods and literature data, a table of selected values is given.     

Novel species in the electrochemical reduction of a metalmetal bond bridged by a bidentate fluorophosphine

The purple bridged bimetallic complex [CH₃N(PF₂)₂]₃Co₂(CO)₂ undergoes successive chemically and electrochemically reversible one-electron reductions to the corresponding green radical anion and pale-yellow dianion. The radical anion is relatively unreactive towards oxygen and methyl iodide. The dianion is not only reactive towards oxygen and methyl iodide but also captures small positively charged species (e.g. Li⁺ and H⁺) with significant alteration of its chemical properties.     

The use of Omega Chrome Fast Blue 2G in the microdetermination of some metals

Summary Omega Chrome Fast Blue 2G has been found to be a suitable indicator for the detection of the equivalence point of calcium, magnesium and manganese in the presence of cadmium, nickel, and aluminium, when they are masked by the addition of cyanide or triethanolamine. It is also a suitable indicator for the back titration of aluminium using calcium or magnesium as a back titrant.This dye has also been found to be a suitable reagent for the colorimetric determination of calcium, magnesium, manganese and thorium.     

Synthesis of Some Novel 2‐Anilinothiophene, 2,3′‐Bithienyl and Thienylthiopyridine Derivatives Resistance to Penicillium Digitatum Effect the Fruit

Reaction of benzotriazol‐1‐yl acetone 1 with phenyl isothiocyanate followed with α‐chloroacetone or ethyl‐α‐chloroacetate afforded 2‐anilinothiophenes 3 or 4 , respectively. Treatment of 3 with malononitrile at different reaction conditions afforded 6 or 7 . Reaction of 1 with CS₂ in DMF and phenacylbromide afforded S‐alkylated thiophene 10 . Reactions of the latter compound with different active methylene nitriles afforded thienylthiopyridine derivatives 14 and 15 . Condensation of 10 with hydrazine hydrate afforded hydrazon derivative 16 . Reaction of thiophene 17 with formamide in DMF afforded 19 which converted to N‐thienylpyrimidine 20 when treated with malononitrile. The structure of the newly synthesized compounds has been established on the basis of their analytical and spectral data. The compounds were also investigated for antibacterial and antifungal activities.     

Capillary electrochromatography with monolithic stationary phases: 1. Preparation of sulfonated stearyl acrylate monoliths and their electrochromatographic characterization with neutral and charged solutes

A novel monolithic stationary phase having long alkyl chain ligands (C17) was introduced and evaluated in capillary electrochromatography (CEC) of small neutral and charged species. The monolithic stationary phase was prepared by the in situ copolymerization of pentaerythritol diacrylate monostearate (PEDAS) and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) in a ternary porogenic solvent consisting of cyclohexanol/ethylene-glycol/water. While AMPS was meant to support the electroosmotic flow (EOF) necessary for transporting the mobile phase through the monolithic capillary, the PEDAS was introduced to provide the nonpolar sites for chromatographic retention. Monolithic columns at various EOF velocities were readily prepared by conveniently adjusting the amount of AMPS in the polymerization solution as well as the composition of the porogenic solvent. The monolithic stationary phases thus obtained exhibited reversed-phase chromatography behavior toward neutral solutes and yielded a relatively strong EOF. For charged solutes (e.g., dansyl amino acids), nonpolar as well as electrostatic interaction/repulsion with the monoliths were observed in addition to electrophoretic migration. Therefore, for charged solutes, selectivity and migration can be readily manipulated by changing various parameters including the nature of the monolith and the composition of the mobile phase (e.g., pH, ionic strength and organic modifier). Ultrafast separation on the time scale of seconds of 17 different charged and neutral pesticides and metabolites were performed using short capillary columns of 8.5 cm x 100 microm ID.