Particle-macromolecule interactions in aqueous solution Part II: Adsorption and flow studies of polyvinylalcohol/polystyrene latex mixtures

Summary The adsorption characteristics of PvOH on a surfactant free polystyrene latex surface have been determined from adsorption isotherm and zeta potential measurements. The concentration and shear dependence of the flow behaviour of surfactant free polystyrene latex alone, and together with PvOH, have also been obtained. The. data show that the marked increase in viscosity observed in polystyrene dispersions upon the addition of PvOH is satisfactorily accounted for by the excluded volume effect of an adsorbed monolayer of PvOH on the polystyrene surface.

---

Zusammenfassung Das Adsorptionsverhalten von Polyvinylalkohol an einer Tensidfreien Polystyrollatem-Oberfläche wurde aus Adsorptionsisothermen und Zetapotentialmessungen bestimmt. Außerdem wurde die Konzentrationsund Scherabhängigkeit des Fließverhaltens der Polystyrolteilchen mit und ohne adsorbiertem Polyvinylalkohol ermittelt. Die Viskositätzunahme der Dispersion durch Zugabe von PvOH kann durch das Kovolumen einer monomolekularen adsorbierten PvOH-Schicht gedeutet werden.

     

Aspects of the thermal and photostabilisation of high styrene-butadiene copolymer (SBC)

The thermal and photo-oxidative stabilisation of high styrene-butadiene copolymer (SBC) with high styrene content (K-Resin) has been studied using a variety of analytical and spectroscopic methods including yellowness, luminescence and FT-IR spectroscopy coupled with hydroperoxide analysis in order to understand the nature and effectiveness of the processes involved. The next stage of the program was to evaluate the effects of various chemical/solvent treatments on the role of metal ions/residual catalysts and hydroperoxides in the thermal and photostabilisation of SBS as well as combinations of phenolic antioxidants and phosphites/phosphonites. Other additives, such as HALS and a metal deactivator, were also added to the combinations of phenolic and phosphite antioxidants in order to study their behaviour and efficiency. The chemical treatments appeared to stabilise SBS against thermal oxidation to a greater or lesser extent. Phosphoric acid treatment via reflux and zinc dithiocarbamate treatments showed better performances than the rest of the treatments, the latter was particularly effective at inhibiting the discolouration. During photo-oxidation, on the other hand, chemical treatments involving phosphoric acid and pre-thermal effects showed the importance of catalyst effects. The addition of phenolic antioxidants, phosphites/phosphonites, metal deactivator and HALS was found to stabilise the SBS against thermal and photo-oxidation. In thermal oxidation, the combination of Irganox^® 1010/Irgafos^® 168 was found to effectively stabilise the polymer when the finalisation of the polymerisation was with adipic acid. When the same antioxidants were used, but with polymer finalised with BHT, strong yellowing was observed and a higher amount of hydroperoxides and oxidation products. Increasing the amount of antioxidants did not increase the stabilisation efficiency. The stabilisation efficiency of Irganox^® 1010 combined with Alkanox^® P-24 was found to be more effective than when it was combined with Irgafos^® 168. The formulations containing Irgafos^® 168/Irganox^® 1010 and Irgafos^® 168/Irganos^® 1330 were more effective in colour protection and retarding the formation of oxidation products than the combinations of Irgafos^® 168/Irganox^® 3114 and Irgafos^® 168/Lowinox^® 1790. The effect of the addition of HALS, such as Tinuvin^® 770, Tinuvin^® 622 and Chimassorb^® 944, and a metal deactivator, such as Irganox^® MD 1024, to the combination of Irgafos^® 168/Irganox^® 1010 was found to be antagonistic. In photo-oxidation, a combination of Irganox^® 1010/Irgafos^® 168 protected the polymer efficiently, when the polymerisation of the polymer was finalised with adipic acid. When the polymerisation was finalised with BHT, a higher amount of hydroperoxides and oxidation products was found. An increase in the amount of antioxidants did not enhance the stability of the polymer. The addition of Alkanox^® P-24 exhibited an opposite effect to that seen in thermal oxidation, as the stabilisation efficiency was less effective than with Irgafos^® 168. The formulation containing Irgafos^® 168/Irganox^® 1010 was found to be the most efficient compared with the other phenolic antioxidants. The addition of Tinuvin^® 770 to the formulation Irgafos^® 168/Irganox^® 1010 was found to have a synergistic effect. The addition of polymeric HALS or Irganox^® MD 1024, a metal deactivator, had an antagonistic effect on the stabilisation of the polymer. Disruption of the excimer sites in the styrenic phase also correlated with stabilisation effects.     

Tris(1,9‐diethyl­adeninium) triiodide diiodide

X‐ray analysis of the title compound reveals three crystallographically distinct cations of 1,9‐diethyl­adeninium, two iodide anions and one triiodide anion in the asymmetric unit, giving six residues and the formula 3C₉H₁₄N₅⁺·I₃⁻·2I⁻. Standard purine nomenclature is used to identify the atoms of each adenine moiety. Hydrogen bonding is observed between atoms N6 and N7 of a pair of cations [N⋯N = 2.885 (4)/2.902 (3) and 2.854 (3)/2.854 (3) Å], with additional hydrogen bonding to I⁻ anions via the other N6 H atom [N⋯I = 3.708 (3), 3.738 (3) and 3.638 (3) Å]. The triiodide anion is not involved in hydrogen bonding. The bond lengths and angles of the 1,9‐diethyl­adeninium cations are compared with literature values and confirm the formation of the imine tautomer.     

First-principles analyses and predictions on the reactivity of barrier layers of Ta and TaN toward organometallic precursors for deposition of copper films

We present theoretical studies based on first-principles density functional theory calculations on the mechanisms of chemical vapor deposition of Cu-hexafluoracetylacetonato-trimethylvinylsilane (Cu(hfac)(tmvs)) on tantalum surfaces. This process has been used in the past to grow copper films via a disproportionation reaction and was found to exhibit adhesion problems. We show that the Ta surfaces are highly reactive and that the organic ligands in a copper precursor would undergo spontaneous decomposition upon contact with the Ta substrates. This may lead to contamination of the metal surfaces caused by the formation of carbide, fluoride, oxide species, or other fragments of the copper precursor on the barrier layer. We propose a practical solution for these adhesion problems caused by the CVD process by passivating the metal surfaces with N(2) to reduce their activity toward the precursor. Our extensive first-principles molecular dynamics simulations under typical deposition conditions predict that, for properly passivated TaN surfaces, only the copper atoms are firmly adsorbed on the surface, with loose Cu-ligand bonds. The ligands are sufficiently stable on these passivated surfaces, remaining slightly above the surface due to the repulsion between the electron-rich N-layer and the electron-rich ligand groups, and subsequently liberated upon the disproportionation reaction.     

Viscosity increase with temperature in cationic surfactant solutions due to the growth of wormlike micelles

Wormlike micellar solutions based on ionic surfactants typically show an exponential decrease in viscosity upon heating. Here, we report the unusual observation of an increasing viscosity with temperature in certain cationic wormlike micellar solutions. The solutions contain a cationic surfactant with an erucyl (C22, mono-unsaturated) tail and an organic salt, sodium hydroxynaphthalene carboxylate (SHNC). When these solutions are heated, their zero-shear viscosity increases over a range of temperatures. In some cases, the viscosity reaches a peak at a certain temperature and then decreases with further heating. The magnitude of the viscosity increase, the onset of this increase, and the peak temperature can all be tuned by varying the SHNC concentration. Small-angle neutron scattering is used to study the origin of this unusual rheological behavior. The data reveal that the contour length of the micelles increases with temperature, in tandem with the rise in viscosity. A possible explanation for the contour length increase, based on a temperature-dependent counterion binding, is discussed.     

Structural investigations of poly(amido amine) dendrimers in methanol using molecular dynamics

The molecular structure of poly(amido amine) dendrimers is investigated with molecular dynamics simulations using the Amber 7 modeling package. A method for defining residues for complex molecules is developed, and it enables the study of the effects of protonation of the primary and tertiary amines. The effects of implicit solvents versus explicit solvents as well as the pH of the solution on the molecular structure are calculated. Good agreement with experimental results for the radius of gyration measured in methanol by X‐ray scattering is observed for simulations with an explicit solvent and protonation of the primary amines. Calculations of the intramolecular atomistic pair correlation function show a dense core, as well as the presence of voids filled with the solvent inside the molecule. The primary amines (end groups) are shown to access the molecular interior by backfolding. Comparisons with experiments and other reported simulation results highlight the advantages of the approach developed here. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3062–3077, 2006     

Novel cytotoxic 1H-cyclopenta[b]benzofuran lignans from Aglaia elliptica

Bioassay-guided fractionation of the stems and fruits of Aglaia elliptica using human oral epidermoid carcinoma (KB) cells, led to the isolation of five cyclopenta[b]benzofurans, constituted by methyl rocaglate (1) and four novel compounds (2–5), along with three known dammarane triterpenoids. Compound 5 possesses an unusual formyl ester substituent at the C-1 position. The structures of the novel compounds were established on the basis of spectroscopic methods. Compounds 1–5 were found to be very potent cytotoxic substances when evaluated against a panel of human cancer cell lines.     

Catalytic thermal oxidation of phenolic antioxidants by hindered piperidine compounds

The interactions of two hindered piperidine compounds, bis(2,2,6,6,-tetramethyl-4-piperidinyl) sebacate and 4-hydroxy-2,2,6,6-tetramethylpiperidine-N-oxy, with various phenolic antioxidants, during the thermal processing of polypropylene have been examined using ultraviolet-visible absorption, infra-red and ESR techniques. Evidence is presented to show that the stable N-oxy radical generated during thermal processing catalytically oxidises phenolic antioxidants to their corresponding quinone forms. The implications of this interaction, particularly with regard to its effect on light stability, are discussed.     

Propionaldehyde: ab initio and semi-empirical calculations

The internal rotation of propionaldehyde about the 1–2 bond has been studied by means of ab initio calculations. The most stable conformer has methyl and carbonyl eclipsed. Increasing the 1–2 dihedral angle to 60°, 120°, and 180° gives energies of 1.7, 0.4, and 0.7 Kcal/mol, respectively. The agreement with force field calculations and with experiment is reasonable.     

EFFECTIVENESS OF PHOTOFRIN II IN ACIWATION OF MACROPHAGES AND in vitro KILLING OF RETINOBLASTOMA CELLS

Abstract Administration of a small dose (300 ng/mouse) of photofrin II (PII) to mice, followed by 4 days of exposure to only ambient fluorescent light in animal quarters, induced Fc-receptor-mediated phagocytic and superoxide-generating capacities of peritoneal macrophages by five- and seven-fold, respectively. When these mice were kept in the dark for 4 days, no activation of macrophages was observed. These results suggest that macrophage activation is a consequence of photodynamic activation. Much higher doses (> 3000 ng/mouse) suppressed macrophage activity. However, 2 months after administration of 3000 ng PII/mouse, greatly enhanced phagocytic and superoxide-generating capacities of peritoneal macrophages were observed.
In vitro photodynamic activation of macrophages was analyzed after white or red fluorescent light exposure of mouse peritoneal cells (mixture of macrophages and B and T lymphocytes) in media containing PII. A short (10 s) white fluorescent light treatment of peritoneal cells in a medium containing 0.03 ng PII/mL produced the maximal level of phagocytic activity of macrophages. Illumination with the same total fluence of red fluorescent light requires a threefold higher concentration of PII to achieve the same extent of enhanced phagocytic activity of macrophages. Thus, photodynamic activation of macrophages with PII by white fluorescent light was more efficient than by red fluorescent light. Similarly, photodynamic killing of retinoblastoma cells was more efficient with white than red fluorescent light. The concentration of hematoporphyrin (HP) or PII required for direct photodynamic killing of retinoblastoma cells was roughly four orders of magnitude greater than that required for activation of macrophages. These results suggest that effective photodynamic therapy may be achieved with milder treatments that stimulate macrophage activity, an important component of immunopotentiation.