Synthesis of a New NIR Fluorescent Nd Complex Labeling Agent

Fluorescent analysis has been widely used in biological, chemical and analytical research. A useful fluorescent labeling agent should include NIR emission, a large Stoke’s shift, and good labeling ability without interfering with the pharmacological profile of the labeled compound. Thus, we planned to develop an M-AMF-DOTA(Nd) derivative composed of an NIR fluorescent moiety and a maleimide conjugating moiety as a new NIR fluorescent labeling agent which fulfills these requirements. M-AMF-DOTA(Nd) was synthesized from 4-amino-fluorescein and was conjugated with an avidin molecule (Avidin-AMF-DOTA(Nd)) through Lys-side chains by reaction with 2-iminothiolane. The fluorescent features of M-AMF-DOTA(Nd) and Avidin-AMF-DOTA(Nd) were comparatively evaluated. A binding assay of Avidin-AMF-DOTA(Nd) with D-biotin and a tumor cell-uptake study were performed to estimate the effects of conjugation on the biological and physicochemical features of the protein. M-AMF-DOTA(Nd) was obtained in 22% overall yield. M-AMF-DOTA(Nd) had a typical NIR fluorescence from the Nd ion (880 nm and 900 nm from 488 nm excitation). Avidin-AMF-DOTA(Nd) was easily synthesized and also had typical NIR fluorescence from the Nd ion without loss of fluorescent intensity. The binding affinity of Avidin-AMF-DOTA(Nd) to D-biotin was equivalent to naive avidin. Avidin-AMF-DOTA(Nd) was taken up by tumor cells in the same manner as avidin conjugated with fluorescein isothiocyanate, an established, widely used fluorescent avidin. Results from this study indicate that M-AMF-DOTA(Nd) is a potential labeling agent for routine NIR fluorescent analysis.     

Conformational equilibrium of 1,2-dichloroethane in water: comparison of PCM and RISM-SCF methods

The RISM-SCF and polarizable continuum model (PCM) approaches have been applied to study the conformational equilibrium of 1,2-dichloroethane (DCE) in water. Both the electron correlation effect and basis sets play an important role in the relative energies of the gauche and trans conformers in gas and solution phases. Both PCM and RISM-MP2 methods resulted in a consistent trend with the previous experimental and theoretical studies that the population of the gauche conformer increases in going from the gas phase to the aqueous solution. However, the PCM treatment could not describe the solvent effect completely in that the sign of the relative free energy of the gauche and trans forms is opposite to the most recent experimental and theoretical data, while the RISM-MP2 gives the right sign in the free energy difference. We found that the larger excess chemical potential gain (by ca. -4.1 kcal/mol) for the gauche conformer is large enough to result in the gauche preference of DCE in water, though it has to compensate for more solute reorganization energy (approximately 1.6 kcal/mol) and overcome the energy difference (approximately 1.6 kcal/mol) in the gas phase. The radial distribution functions between DCE and the nearest water shows that the electrostatic repulsion between chlorine and oxygen atoms is higher in the trans conformer than in the gauche one, while the attractive interaction between chlorine and hydrogen of water is higher in the gauche conformer.     

Multiple ionization bursts in laser-driven hydrogen molecular ion

Theoretical study on H2(+) in an intense infrared laser field on the attosecond time scale reveals that the molecular ion shows multiple bursts of ionization within a half-cycle of the laser field oscillation, in contrast to the widely accepted tunnel ionization picture for an atom. These bursts are found to be induced by transient localization of the electron at one of the nuclei, and a relation between the time instants of the localization and the vector potential of the laser light is derived. A scheme is proposed to probe the localization dynamics by an extreme ultraviolet laser pulse.     

Electron tomography of Nafion ionomer coated on Pt/carbon black in high utilization electrode for PEFCs

To confirm the superiority of newly developed electrocatalyst layer (ECL) for polymer electrolyte fuel cells, three-dimensional dispersion states of Nafion ionomer in Pt/carbon black agglomerates were analyzed by electron tomography based on multiple TEM images taken at different tilt angles. Uniform distribution of the ionomer has been first observed, proving the high catalyst utilization in the new ECL distinctive from that of the conventional one.     

On-Line Coupling of a Micro Liquid Chromatograph to a Fourier Transform Infrared Spectrophotometer

A micro liquid chromatograph-interfaced Fourier transform infrared spectrophotometer system (LC/FTIR) for on line analysis of liquid chromatography effluents is described. About 2 μg of injected diethylphthalate can be detected using a 0.025 mm pathlength flow cell. Several examples of a micro LC/FTIR are demonstrated.     

Optimization of background electrolyte composition for simultaneous contactless conductivity and fluorescence detection in capillary electrophoresis of biological samples

In this article, optimization of BGE for simultaneous separation of inorganic ions, organic acids, and glutathione using dual C⁴D‐LIF detection in capillary electrophoresis is presented. The optimized BGE consisted of 30 mM 2‐[4‐(2‐hydroxyethyl)piperazin‐1‐yl]ethanesulfonic acid, 15 mM 2‐amino‐2‐hydroxymethyl‐propane‐1,3‐diol, and 2 mM 18‐crown‐6 at pH 7.2 and allowed simultaneous separation of ten inorganic anions and cations, three organic acids and glutathione in 20 min. The samples were injected hydrodynamically from both capillary ends using the double‐opposite end injection principle. Sensitive detection of anions, cations, and organic acids with micromolar LODs using C⁴D and simultaneously glutathione with nanomolar LODs using LIF was achieved in a single run. The developed BGE may be useful in analyses of biological samples containing analytes with differing concentrations of several orders of magnitude that is not possible with single detection mode.     

Microscopic Elucidation of Solid‐Electrolyte Interphase (SEI) Film Formation via Atomistic Reaction Simulations: Importance of Functional Groups of Electrolyte and Intact Additive Molecules

Secondary batteries such as Li‐ion battery are expected to be utilized as not only ubiquitous electric power sources such as mobile phones but also large‐scale electricity storage devices. Therefore, it is urgent to develop the higher performance secondary batteries. Their lifetime and stability are found to be strongly dependent on the nature of passivation film called solid electrolyte interphase (SEI) film formed on the anode surface in the initial charge‐discharge cycle. However, since it is difficult to directly observe the film formation processes in experiment, its microscopic mechanism is still not found. On the other hand, although the theoretical methods are useful complement to the experiment, some new methodologies are necessary to understand the long‐term processes of SEI film, which is produced as a result of that a lot of chemical reactions proceed simultaneously. Under the circumstances, we have developed Red Moon method that can simulate such complex chemical reaction systems, and were able to analyze for the first time the SEI film formation processes on the anode surface at the atomistic level. Then, we clarified theoretically the microscopic mechanism of the additive effect which is essential to improve the Na‐ion battery performance so as to enhance the SEI film formation. This new microscopic insight must provide an important guiding principle for use in designing the most suitable electrolytes for developing high‐performance secondary batteries.     

De-excitation process and hot luminescence in the FA(type I) center in KCl:Na

The de-excitation process of F_A(type I) centers in KCl:Na has been investigated by measuring the hot luminescence spectrum from optically excited F_A centers with time-resolved spectroscopy. The experimental results are analyzed by using a model that describes a time evolution of the phonon wave packet during the vibronic relaxation process from the Franck-Condon state to a relaxed excited state. From the analysis of the experimental data, information on the vibronic mixing between 2p and 2s states, whose magnitude varies during the relaxation process, and the adiabatic potential energy curves of 2s and 2p states are extracted. The present results are compared with the already known ones of the F_A(type II) centers.     

Zirconia-based planar NO2 sensor using ultrathin NiO or laminated NiO–Au sensing electrode

The nanostructured thin NiO films with the thicknesses of 30–180 nm were examined as a sensing electrode (SE) for the planar mixed-potential-type yttria-stabilized zirconia (YSZ)-based NO₂ sensor. The sensing characteristics were examined in the temperature range of 600–800 °C under the wet condition (5 vol.% water vapor). Among the NiO-SEs tested, the 60 nm-thick NiO-SE sintered at 1,000 °C was found to give the highest NO₂ sensitivity in the NO₂ concentration range of 50–400 ppm accompanying with fast response/recovery at the operating temperatures of 600–700 °C. The high NO₂ sensitivity was attributed to the high catalytic activity for both electrochemical reactions of O₂ and NO₂ at the interface of NiO-SE/YSZ. The ultrathin gold layer with the thickness of about 60 nm was additionally formed on the 60 nm-thick NiO-SE to fabricate the laminated-type (60 nm NiO/60 nm Au)-SE. It was demonstrated that the use of this laminated (NiO–Au)-SE improved both the sensitivity and the selectivity to NO₂.