Discussion on a possible neutrino detector located in India

We have identified some important and worthwhile physics opportunities with a possible neutrino detector located in India. Particular emphasis is placed on the geographical advantage with a stress on the complimentary aspects with respect to other neutrino detectors already in operation.     

Effect of annealing temperature on photoelectrochemical properties of nanocrystalline MoBi2(Se0.5Te0.5)5 thin films

Nanocrystalline MoBi₂(Se_0.5Te_0.5)₅ thermoelectric thin films have been deposited on ultrasonically cleaned glass and FTO-coated glass substrates by Arrested Precipitation Technique. The change in properties of MoBi₂(Se_0.5Te_0.5)₅ thin films were examined after annealing at the temperature 473 K for 3 h. The structural, morphological, compositional and electrical properties of thin films were characterized by X-ray Diffraction, Scanning Electron Microscopy, Energy Dispersive Spectroscopy, etc. Thermoelectric properties of the thin films have been evaluated by measurements of electrical conductivity and Seebeck coefficient in the temperature range 300–500 K. Our aim is to investigate the effect of annealing on behaviour of MoBi₂(Se_0.5Te_0.5)₅ thin films along with photoelectrochemical properties.     

Epitaxy, truncations, and overhangs in palladium nanoclusters adsorbed on MgO(001)

The structure of Pd clusters adsorbed on MgO(001) is determined by a combination of global-optimization methods using semiempirical potentials and density functional calculations. The transition to fcc clusters with (001) epitaxy is shown to take place in the size range 10相似文献   

Structural Orientations of Cellulose Acetate Phthalate/Ethyl Cellulose Blends in Solution

Cellulose acetate phthalate/ethyl cellulose blends were investigated by means of attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), thermogravimetry/differential thermal analysis (TGA-DTGA), shear viscosity and oscillatory shear tests. The studies showed a higher thermal stability, induced by the occurrence of hydrogen bonding, more predominant in ethyl cellulose and blends with higher content of ethyl cellulose. The effect of solution concentrations in N,N-dimethylacetamide, blend compositions and shear rate on the rheological functions generated regions with properties typical for liquid crystalline solutions in the shear field. These studies are suggested to be useful in identification of liquid crystal properties, required in some electrotechnical applications.     

UV-A fingerprint mutations in human skin cancer

This review of our work, presented at the Photocarcinogenesis Symposium of the 14th International Congress on Photobiology, shows that UV-A causes a similar number of gene mutations as UV-B in human skin cancer. Areas of about 20 keratinocytes from solar keratoses and squamous cell carcinomas, which are benign and malignant skin cancers, respectively, were sampled by laser capture microdissection. Automated sequencing of the p53 gene was used to detect mutations in these tumor areas, and the cause of the mutations was attributed on the basis of previously published studies. UV-A and UV-B caused similar numbers of p53 gene mutations in both benign and malignant human skin tumors, with UV-B-induced mutations being restricted to the upper areas of the tumors and UV-A-induced mutations predominating at the basal layer. Furthermore, each microdissected region within a tumor had distinct mutations showing that the skin tumors consisted of different clones of cells. This is not consistent with how human skin carcinogenesis is currently understood, and hypotheses to explain our data are presented. We propose that the UV-A waveband of sunlight is as important as UV-B in causing skin cancer in humans.     

Pressure‐induced anomalous phase transformation in nano‐crystalline dysprosium sesquioxide

The phase transformation in nano‐crystalline dysprosium sesquioxide (Dy₂O₃) under high pressures is investigated using in situ Raman spectroscopy. The material at ambient was found to be cubic in structure using X‐ray diffraction (XRD) and Raman spectroscopy, while atomic force microscope (AFM) showed the nano‐crystalline nature of the material which was further confirmed using XRD. Under ambient conditions the Raman spectrum showed a predominant cubic phase peak at 374 cm⁻¹, identified as F_g mode. With increase in the applied pressure this band steadily shifts to higher wavenumbers. However, around a pressure of about 14.6 GPa, another broad band is seen to be developing around 530 cm⁻¹ which splits into two distinct peaks as the pressure is further increased. In addition, the cubic phase peak also starts losing intensity significantly, and above a pressure of 17.81 GPa this peak almost completely disappears and is replaced by two strong peaks at about 517 and 553 cm⁻¹. These peaks have been identified as occurring due to the development of hexagonal phase at the expense of cubic phase. Further increase in pressure up to about 25.5 GPa does not lead to any new peaks apart from slight shifting of the hexagonal phase peaks to higher wavenumbers. With release of the applied pressure, these peaks shift to lower wavenumbers and lose their doublet nature. However, the starting cubic phase is not recovered at total release but rather ends up in monoclinic structure. The factors contributing to this anomalous phase evolution would be discussed in detail. Copyright © 2010 John Wiley & Sons, Ltd.     

Performance of slotted pores in particle manufacture using rotating membrane emulsification

This paper addresses the use of different slotted pores in rotating membrane emulsification technology. Pores of square and rectangular shapes were studied to understand the effect of aspect ratio （1-3.5） and their orientation on oil droplet formation. Increasing the membrane rotation speed decreased the droplet size, and the oil droplets produced were more uniform using slotted pores as compared to circular geometry. At a given rotation speed, the droplet size was mainly determined by the pore size and the fluid velocity of oil through the pore （pore fluid velocity）. The ratio of droplet diameter to the equivalent diameter of the slotted pore increased with the pore fluid velocity. At a given pore fluid velocity and rotation speed, pore orientation significantly influences the droplet formation rate： horizontally disposed pores （with their longer side perpendicular to the membrane axis） generate droplets at double the rate of vertically disposed pores. This work indicates practical benefits in the use of slotted membranes over conventional methods.     

Synthesis of chromogenic crown ethers and liquid-liquid extraction of alkali metal ions

New crown ethers carrying a pendent phenolic chromophore were synthesized. These crown ethers, on dissociation of the phenolic proton, provide lipophilic anions which can extract alkali metal cations into 1,2-dichloroethane by forming highly-colored uncharged metal complexes. Structural effects on the extraction were studied for possible use of these crown ethers as extraction—spectrophotometric reagents selective for alkali metals. The following factors are discussed in detail: (i) nature of the crown ether ring (ring size. aza-crown or standard crown ether), (ii) nature of the pendent phenolic group, and (iii) geometry between the crown ether center and pendent phenolic group. 15-Crown-5 or smaller ring-sized reagents favored the extraction of lithium ion when the basicity of the pendent phenolate was relatively high and a six-membered “chelate” ring was possible for the phenolate and the crown ether-bound metal. 15-Crown-5 type reagents were sodium-selective when an eight-membered “chelate” ring was possible between the phenolate and the crown ether-bound metal. 18-Crown-6 type reagents were generally potassium-selective. However, these selectivities were not absolute, and other structural parameters, steric and conformational, must be considered to explain in detail the selectivities of the individual reagents.