啁啾相移光纤光栅分布式应变与应变点精确定位传感研究

利用啁啾相移光纤光栅狭缝的中心波长对应变点和应变量的波长敏感性,实现应变与应变点精确定位的传感.当啁啾光纤光栅上的某一位置产生微应变时,该应变点会产生相移,其频谱则会出现一个与之对应的狭缝,且狭缝的深度和中心波长与应变的大小和位置相关.当串接不同中心波长的啁啾光纤光栅后,即可实现一定范围内的分布式应变与应变点精确定位检测.本文通过V-I传输矩阵法建立了狭缝深度和中心波长关于应变量和应变位置的理论模型,分析结果表明理论上可以实现微米量级的精确定位.搭建了级联啁啾相移光纤光栅的分布式应变传感装置,实验获得的最大应变灵敏度为0.19 pm/με.该精确定位传感装置在先进制造、精密加工、航空航天、铁路系统等高新技术领域具有重要的应用前景.     

GESFIDE-PROPELLER Approach for Simultaneous R2 and R2* Measurements in the Abdomen

Purpose

To investigate the feasibility of combining GESFIDE with PROPELLER sampling approaches for simultaneous abdominal R2 and R2* mapping.

Materials and Methods

R2 and R2* measurements were performed in 9 healthy volunteers and phantoms using the GESFIDE-PROPELLER and the conventional Cartesian-sampling GESFIDE approaches.

Results

Images acquired with the GESFIDE-PROPELLER sequence effectively mitigated the respiratory motion artifacts, which were clearly evident in the images acquired using the conventional GESFIDE approach. There was no significant difference between GESFIDE-PROPELLER and reference MGRE R2* measurements (p = 0.162) whereas the Cartesian-sampling based GESFIDE methods significantly overestimated R2* values compared to MGRE measurements (p < 0.001).

Conclusion

The GESFIDE-PROPELLER sequence provided high quality images and accurate abdominal R2 and R2* maps while avoiding the motion artifacts common to the conventional Cartesian-sampling GESFIDE approaches.     

Chemical composition and magnetism of Ag doped LaMnO3

By using a sol-gel clue, a set of polycrystalline perovskite samples La$_{1 - x}$Ag$_{x}$MnO$_{3}$ with a nominal doping level $x$ ranging from 0.05 to 0.45 has been synthesized. The chemical composition and the magnetism of the samples were investigated. A little Ag was found seeping from the samples in the sintering process when the doping level exceeded 0.05 and the sintering temperature was higher than 700\du\, resulting in the samples being in multiphase. The magnetic transition points of the samples have been found to decrease with increasing sintering temperature. A concentration-dependent $T_{\rm c}$ similar to that of bivalent metal ion doped perovskite, has been obtained. We believe that the Ag seeping in the sintering process is responsible for those magnetic characteristics.     

A global design of high power Nd-Yb co-doped fiber lasers

A global optimization method - niche hybrid genetic algorithm (NHGA) based on fitness sharing and elite replacement is applied to optimize Nd³⁺-Yb³⁺ co-doped fiber lasers (NYDFLs) for obtaining maximum signal output power. With a objective function and different pumping powers, five critical parameters (the fiber length, L; the proportion of pump power for pumping Nd³⁺, η; Nd³⁺ and Yb³⁺ concentrations, N_Nd and N_Yb and output mirror reflectivity, R_out) of the given NYDFLs are optimized by solving the rate and power propagation equations. Results show that dividing equally the input pump power among 808 nm (Nd³⁺) and 940 nm (Yb³⁺) is not an optimal choice and the pump power of Nd³⁺ ions should be kept around 10-13.78% of the total pump power. Three optimal schemes are obtained by NHGA and the highest slope efficiency of the laser is able to reach 80.1%.     

A Novel Highly Sensitive and Selective Fluorescent Sensor for Imaging Copper (II) in Living Cells

In this work, we designed and synthesized a novel quinolin-based derivative which exhibited signaling behaviors for Cu²⁺. Upon the addition of Cu²⁺ to the solution of the molecule, it displayed an obvious fluorescence quenching in a linear fashion due to the formation of a 1:1 metal–ligand complex. This fluorescent sensor exhibited a rare sensitivity toward Cu(II) (the level of magnitude could be 6?×?10^?8), a rapid response (<10 s) and also high selectivity toward Cu²⁺ over other metal ions such as Na⁺, K⁺, Ca²⁺, Mg²⁺, Ba²⁺, Fe³⁺, Mn²⁺, Hg²⁺, Pb²⁺, Cd²⁺, Cr³⁺, Co²⁺, Zn²⁺ and Al³⁺. Simultaneously, the cell imaging experiments and filter paper test demonstrated its extensive applicability.     

基于虚拟仪器技术和网络的综合实验控制系统设计

为实现大型物理实验现场复杂多样的仪器控制,分析了物理实验的特点、过程、环境及仪器控制功能需求,利用虚拟仪器技术、计算机网络技术和数据库技术,建立了一套集成硬件和软件的综合控制管理信息系统,实现记录系统中示波器状态远程批量设置及波形数据自动采集、控制探测系统的高压电源并发加压或退压、保障各测试项目间测试仪器之间时间关联、监控UPS电量和远端现场图片或视频状态。给出了系统的关键的设计思路,列举了某型示波器控制的通用控制代码。结果表明,系统达到了一人总控或多人分权控制实验过程中多种多台仪器的目标,方便快捷地实现不同品牌不同类型示波器的相同功能。     

Analysis of the Crosstalk in WDM Systems Caused by Cross-phase Modulation in Erbium-doped Fiber Amplifiers

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｃｒｏｓｓ ｐｈａｓｅｍｏｄｕｌａｔｉｏｎ (ＸＰＭ )ｈａｓａｎｉｍｐｏｒｔａｎｔｉｍｐａｃｔｏｎｔｈｅｐｅｒｆｏｒｍａｎｃｅｏｆｈｉｇｈ ｓｐｅｅｄｗａｖｅｌｅｎｇｔｈｄｉｖｉｓｉｏｎｍｕｌｔｉｐｌｅｘｉｎｇ(ＷＤＭ )ｏｐｔｉｃａｌｆｉｂｅｒｃｏｍｍｕｎｉｃａｔｉｏｎｓｙｓｔｅｍ[1,2 ] .ＩｔｃａｕｓｅｓｃｒｏｓｓｔａｌｋｂｅｔｗｅｅｎｓｉｍｕｌｔａｎｅｏｕｓｌｙｔｒａｎｓｍｉｔｔｉｎｇｃｈａｎｎｅｌｓｉｎＷＤＭｓｙｓｔｅｍｓａｎｄｉｓｂｅｌｉｅｖｅｄｔｏｂｅａｓｉｇｎ…     

RSFQ的初步研究

RSFQ应用于高速电子计算机是近年来活跃在低温超导电子学领域的新兴课题。文中从约瑟夫逊效应的等效模型出发 ,阐述了 RSFQ电路的基本基理及基于节点约瑟夫逊相位的数值模拟方法 ,并把它用于一个 RSFQ单向缓冲器的瞬态分析 ,给出了其相位和电压波形     

Theoretical Calculations of Thermal Shifts of Ground-StateZero-Field-Splitting for Ruby

By taking into account all the irreducible representations and their components in the electron-phonon interaction (EPI) as well as all the levels and the admixtures of wavefunctions within d³ electronic configuration, the thermal shifts (TS) of the ground-state zero-field-splitting (GSZFS) due to EPI for ruby have microscopic-theoretically been calculated; the contribution to TS of GSZFS from thermal expansion has also been calculated. The results are in very good agreement with experiments. It is found that the contributions from the first-order perturbation of the second-order term in EPI Hamiltonian are dominant in the Raman term and optical-branch term for TS of GSZFS; the different between the TS due to EPI of t₂^{3 4}A₂±(1/2) e₂ (G₂) level and the TS due to EPI of t₂^{3 4}A₂±(3/2) e₂ (G₁) level gives rise to the TS due to EPI of GSZFS, which is very small in comparison with the TS due to EPI of G₂ or G₁ level. Among various terms in TS of GSZFS, Raman term is the largest one and the signs of the Raman term and optical-branch term are opposite to the sign of the thermal-expansion term; the optical-branch term plays an important role in TS of GSZFS and increases rapidly with temperature; all various contributions to TS of GSZFS have to be taken into account, since the subtle balance among them determines the total result. The comparison between the features of TS of GSZFS and those of TS of R₁ and R₂ lines has been made. For TS of GSZFS, the contribution from thermal expansion is especially important; the neighbor-level term is insignificant.     

用数字干涉仪测量变形镜影响函数的实验研究

分析了变形反射镜面形影响函数的意义，鉴于自适应光学系统中波前探测大都以测量波前斜率为基础的特点，提出应研究斜率影响函数，并在此基础上构成波前复原矩阵。还介绍了用数字干涉仪测量变形镜影响函数的方法和结果，并对测量结果进行了分析，得到了影响函数的各种参数，例如：交连值，高斯指数，特征宽度等。并将干涉法测量斜率影响函数的结果与实际的哈特探测器的测试结果进行了比较。