Determination of human IgG by solid-substrate room-temperature phosphorescence immunoassay based on an antibody labeled with nanoparticles containing rhodamine 6G luminescent molecules

Luminescent 50-nm silicon dioxide nanoparticles containing both types of rhodamine 6G (R; particles denoted R-SiO₂) were synthesized by the sol–gel method. In the presence of Pb(Ac)₂ as a heavy atom perturber the particle can emit the intense and stable room-temperature phosphorescence (RTP) signal of R on a polyamide membrane, with _ex^max/_em^max=470/635 nm for R. Our research indicates that the specific immune reaction between goat-anti-human IgG antibody labeled with R-SiO₂ and human IgG can be carried out quantitatively on a polyamide membrane, and the phosphorescence intensity was enhanced after the immunoreaction. Thus a new method for solid-substrate room-temperature phosphorescence immunoassay (SS-RTP-IA) for determination of human IgG was established on the basis of antibody labeled with the nanoparticles containing binary luminescent molecules. The linear range of this method is 0.0624–20.0 pg spot^–1 of human IgG (corresponding to a concentration range of 0.156–50.0 ng mL^–1, sample volume 0.40 L spot^–1). The regression equations of the working curves are I_p=71.27+7.208m_IgG (pg spot^–1) (r=0.9996). Detection limits calculated as 3S_b/k are 0.022 pg spot^–1. Compared with the same IA using fluorescein isothiocyanate (FITC) as the marker the new method was more sensitive and had a wider linear range. After elevenfold replicate measurement RSD are 4.5 and 3.6% for samples containing 0.156 and 50.0 ng mL^–1 IgG, respectively. This method is sensitive, accurate, and of high precision.     

A comparative study of mid-infrared diffuse reflection (DR) and attenuated total reflection (ATR) spectroscopy for the detection of fungal infection on RWA2-corn

An investigation into the rapid detection of mycotoxin-producing fungi on corn by two mid-infrared spectroscopic techniques was undertaken. Corn samples from a single genotype (RWA2, blanks, and contaminated with Fusarium graminearum) were ground, sieved and, after appropriate sample preparation, subjected to mid-infrared spectroscopy using two different accessories (diffuse reflection and attenuated total reflection). The measured spectra were evaluated with principal component analysis (PCA) and the blank and contaminated samples were classified by cluster analysis. Reference data for fungal metabolites were obtained with conventional methods. After extraction and clean-up, each sample was analyzed for the toxin deoxynivalenol (DON) by gas chromatography with electron capture detection (GC-ECD) and ergosterol (a parameter for the total fungal biomass) by high-performance liquid chromatography with diode array detection (HPLC-DAD). The concentration ranges for contaminated samples were 880–3600 g/kg for ergosterol and 300–2600 g/kg for DON. Classification efficiency was 100% for ATR spectra. DR spectra did not show as obvious a clustering of contaminated and blank samples. Results and trends were also observed in single spectra plots. Quantification using a PLS1 regression algorithm showed good correlation with DON reference data, but a rather high standard error of prediction (SEP) with 600 g/kg (DR) and 490 g/kg (ATR), respectively, for ergosterol. Comparing measurement procedures and results showed advantages for the ATR technique, mainly owing to its ease of use and the easier interpretation of results that were better with respect to classification and quantification.     

Role of the C3-substituted derivatives of cinchonidine in the enantioselective hydrogenation of ethyl pyruvate on Pt-alumina catalyst in AcOH

Summary The enantioselective hydrogenation of ethyl pyruvate (EtPy) was studied on Pt-alumina catalysts modified by C3-substituted cinchonidines (NC, A, B, C1, C2in Fig. 1) and for comparison by DHCDand MeO-DHCDin AcOH. The effect of the C3-substituent on the reaction rate and the enantioselectivity were examined. Using the Engelhard 4759 catalyst under mild experimental conditions (room temperature, hydrogen pressure 1 bar) such as DHCDthe (R)-ethyl lactate formed in excess (e.e.max: 79-91%)</o:p>     

General survey and microanalytical aspects of ion-selective electrodes

Summary A survey is presented of recent developments in the field of ion-selective electrodes. Special emphasis is placed on problems of electrode miniaturization and ISFET production. Different electrode types in present use are described and theories for the interpretation of electrode mechanisms are outlined. It is pointed out that the electrode potentials are due to the formation of a space charge. Different applications of ion-selective electrodes are dealt with and the problems connected with the determination of small concentrations are discussed. Attention is given to the selection of conditions under which a reliable measurement of extremely small amounts or extremely small concentrations can be ensured.     

Cobalt(II) complexes with disubstituted 3-aminopyrazole derivative: Mononuclear Co(II) complex with in situ prepared formamidine ligand

In the reaction of Co(NO₃)₂ · 6H₂O with 4-acetyl-3-amino-5-methylpyrazole (aamp) two octahedral Co(II) complexes, [Co(aamp)₂(H₂O)₄](NO₃)₂, 1, and [Co(ampf)(MeOH)₂NO₃]NO₃ (ampf = N,N′-bis(4-acetyl-5-methylpyrazole-3-yl)formamidine), 2, were obtained, depending on the reaction conditions. The presence of water in the reaction system leads to incorporation of water molecules into the crystal lattice and 1 was formed. In an anhydrous environment, due to addition of CH(OEt)₃, the fusion of two aamp was induced through their NH₂-groups, incorporating the methine group of CH(OEt)₃. As a result, complex 2, containing an adenino-mimetic NNO pharmacophore ligand, was obtained. The crystal and molecular structure of both compounds was determined. The coordination of aamp in 1 was achieved through N2 of the pyrazole ring. On the contrary, in 2, an unusual coordination mode of pyrazole is found: one of the pyrazole moieties, due to steric hindrance, coordinates through the oxygen atom of the acetyl group instead of N2. The complexes were characterized by elemental analysis and electronic spectra. For 2 a comprehensive IR spectral analysis is given. The metal-ligand interactions in 2 are analyzed by quantum chemical computations. The desolvation mechanism of both compounds is discussed in detail.     

A series of three-dimensional coordination polymers with general formula [{Ln(H2O)n}{Re6Te8(CN)6}] · xH2O (Ln = Eu,Gd, Tb,Dy, Ho,Er, Tm,Yb; n = 3, 4, x = 0, 2.5)

A series of new compounds containing rare earth cations (Eu to Yb) and paramagnetic cluster anion [Re₆Te₈(CN)₆]³⁻ was prepared and investigated. The X-ray structural analyses have revealed that the compounds [{Ln(H₂O)₄}{Re₆Te₈(CN)₆}] · 2.5H₂O; Ln = Eu (1), Tb (3), Dy (4), Ho (5), Er (6), Tm (7), [{Gd(H₂O)₃}{Re₆Te₈(CN)₆}] · 2.5H₂O (2) and [{Yb(H₂O)₄}{Re₆Te₈(CN)₆}] (8) are three-dimensional polymers based on Re–CN–Ln interactions. Measurements of magnetic susceptibility for 2 and 5 showed that effective magnetic moment (at 300 K) was 8.13 μ_B for compound 2 and 10.79 μ_B for compound 5 with weak antiferromagnetic ordering appeared at low temperatures.     

Fluorescence properties of some 2-(4-amino-substituted-3-nitrophenyl)-3-hydroxyquinolin-4(1H)-ones

2-(4-Amino-substituted-3-nitrophenyl)-3-hydroxyquinolin-4(1H)-ones have been studied to evaluate their fluorescence properties and possible use as molecular fluorescent probes. The amino group was substituted with various alkyl moieties possessing a suitable terminal functional group (such as hydroxy or amino group) that could serve to bind a 3-hydroxyquinolin-4(1H)-one (3HQ) fluorescence label to a biomolecule. Besides simple hydrocarbon chains, ligands containing ethylenoxy units as optimal spacers were also tested. The structure-fluorescence properties and theoretical applicability of the studied molecules are discussed.     

Structural properties of new spiro-1,3-propanediaminocyclotriphosphazene derivatives

New 1,3-propanediaminocyclotriphosphazene derivatives (7-17) were synthesized from the reactions of spiro-1,3-propanediaminocyclotriphosphazene, N₃P₃Cl₄[NH(CH₂)₃NH] (1) with the cyclopropanemethylamine (2), cyclohexylamine (3), pyrrolidine (4) cyclohexanol (5), cyclopropylmethanol (6). The structures of the novel compounds (7-17) were characterized by elemental analysis, mass spectrometry, ¹H and ³¹P NMR spectroscopy. The molecular structures of 8, 12 and 13 were determined by X-ray crystallography. The structures of all these three compounds are in the monoclinic crystal system; compounds 8 and 12 have the P21/c space group while compound 13 has the P21/n space group. The ring conformation of the cyclotriphosphazene and other external rings were investigated based on the X-ray crystal structures.     

Influence of axial coordination on the photophysical property of excited state of zinc porphyrin

The phenomenon that metalloporphyrins are coordinated to axial ligands is very common especially in green-plant and photosynthetic bacteria, where such coordination impacts a signifi-cant effect on both the primary charge separation in the reaction center and energy transfer in an-tenna systems[1]. In addition, it plays a key role in photodynamic therapy and medicine synthesis in a sense that some metalloporphyrins have been assembled by coordination bonds to anti-cancer drugs, enhancing the se…     

Kinetics and mechanism of electron-induced splitting of a cyclobutane pyrimidine dimer with or without an electron acceptor

DNA repair has received heightened attention in recent years as ozone depletion threatens to significantly increase DNA damage by UVB radiation[1—6]. The major lesions formed in DNA by this radiation are cis-syn cyclobutane pyrimidine dimers, which are created by the linkage of two neighboring pyrimidine bases in DNA via C5-C5 and C6-C6 atoms by [2+2] cycloaddition[2,5—8]. This potentially lethal or mutagenic damage can be repaired either by the removal of the damaged bases by excisio…