新型水溶性硫杂蒽酮类光引发剂的光引发性能研究

利用红外光谱技术对六种新型水溶性硫杂蒽酮类光引发剂在紫外光聚合反应中的引发性能进行了测试,用相对峰面积法计算了聚合反应的转化率,并据此对引发剂结构与光化学性能之间的关系做了一定的探讨。结果表明该类光引发剂具有很高的光化学活性,而引发剂的结构直接影响引发性能。研究发现硫杂蒽酮母体上甲基的引入使引发剂的引发效率增大,而引发剂侧链上羟基的引入,则由于降低了质量转移的有效性并有可能使引发剂分子缔合,致命引     

MoCo/Y, MoNi/Y氮化物催化剂的结构和CH4+CO2重整反应性能

采用氨气还原法制备了NaY分子筛负载的MoCo/Y、MoNi／Y双组氮化物催化剂，用XRD和EXAFS方法征了样品的结构，并测定了其在CH4＋CO2重整反应中的活性，在氧化态时，MoCo/Y样品中主要存在CoMoO4和Co3O4两种物相，Mo的配位状态接近于CoMoO4，而Co的配位状态更接近于Co3O4，MoNi／Y样品中主要有NiMoO4和NiO两种物相，Mo的配位状态接近于MiMoO4，而Ni的配位状态可能是NiMoO4和NiO两种化合物中Ni配位状态的平均效果，Ni-Mo之间的朴素作用似乎比Co-Mo相对较强，在氮化态时，两种样品中Mo的配位状态较为相似，但即不同于MoO3，也不同于单组分γ－Mo2N.Co和Ni的配位状态都不同于各在氧化态下的状态，且都在相同的位置出现一个新强峰，这似乎表明MoCo和MoNi生成了结构相似的氮化物，在CH4＋CO2重整反应中，氮化态MoCO/Y和MoNi/Y的活性大大超过非负载单组分γ－Mo2N催化剂，其中MoNi/Y的活性相对更好一些，且活性随Ni含量增加而提高。     

氢化硝基苯合成对氨基酚中活性炭负载铂催化剂的新制备方法研究

采用不同还原剂（甲醛、甲酸、硼氢化钾和氢气）,或于还原Pt(IV)过程中引入少量Pt/AC(AC：活性炭)催化剂“催化”氢气分子,制备了Pt/AC催化剂。其催化氢化硝基苯制对氢基酚的反应结果表明,制备催化剂时所用的还原剂对催化剂的活性影响很大,但对反应选择性影响较小。用甲醛、甲酸和硼氢化钾还原制成的催化剂的活性皆较高;以氢气还原制得的催化剂活性较差;采用“催化”氢气还原法,可大大提高Pt/AC催化剂的活性,与传统甲醛还原法相比,甲酸和“催化”氢气还原制备Pt/AC催化剂的方法较简便、有效。     

离子色谱法同时测定水中六种阳离子

研究了用抑制电导离子色谱法一次进样同时测定水中Li^ ,Na^ , NH4^ ,Mg^2 ,Ca^2 的色谱法条件，相对标准偏差小于0．5％，加标回收率在97．5％－104．0％。在水质分析中运用t检验法，比较了用钙、镁离子浓度计算和传统方法测定的总硬度之间是否存在显著性差异。     

The di-iron subsite of all-iron hydrogenase: mechanism of cyanation of a synthetic [2Fe3S]-carbonyl assembly

This paper describes the kinetics and intimate mechanisms associated with cyanation of [2Fe3S] assemblies to give species structurally related to the subsite of all-iron hydrogenase. Stopped-flow FTIR spectroscopy has enabled the quantitation of the dynamics of five well-defined steps that experimentally illustrate the role of bridging carbonyls in the assembly of the dicyanide species, how on-off sulfur ligation can have a dramatic effect on cyanation kinetics and how the [2Fe3S] core stabilises bridging carbonyl species.     

Physically adsorbed chiral stationary phase of avidin on monolithic silica column for capillary electrochromatography and capillary liquid chromatography

The physical adsorption method proposed previously has been successfully applied to a monolithic silica column. By virtue of the physical adsorption, a chiral stationary phase of avidin was prepared onto the silica monolith. The phase ratio of resulting stationary phase was evaluated with frontal analysis. The method proved to be comparable in phase ratio to the chemical bonding methods used in high-performance liquid chromatography (HPLC). Enantiomer separations were carried out in capillary electrochromatography (CEC) and capillary liquid chromatography (CLC) modes. Due to its larger phase ratio, the resulting column showed more powerful separation capability as compared to open-tubular CEC (OTCEC). Twelve chiral compounds were baseline-resolved. The resulting column showed high separation efficiency, with average theoretical plate numbers of 66 000/m for CLC and 122 000/m for CEC. Good reproducibility was observed, with RSD value less than 1.3% for retention time, retention factor and separation factor, and less than 6.6% for plate counts and resolution (n = 40). Fast separations were achieved with a short column. The test enantiomers were baseline-resolved within 4 min under CLC and CEC modes. In addition, field-enhanced sample injection (FESI) was coupled to CLC as well as CEC to improve the detection sensitivity.     

Syntheses and Crystal Structures of 4,4‘—Diformyl—diphenoxyethane and 4,4’,4‘’—Triformyl—triphenoxytriethylamine

Two title compounds, 4,4'-diformyl-diphenoxyethane (compound 1, C16H14O4)and 4,4',4'-triformyl-triphenoxytriethylamine (compound 2, C27H27NO6), were synthesized by condensation of 4-hydroxybenzaldehyde with 1,2-dichloroethane and tris2-chloroethylamine, respectively in dimethyl formamide in the presence of anhydrous potassium carbonate. The crystal data are: monoclinic, P21/c, a = 7.571(2), b = 12.608(3), c = 7.357(2) ', = 105.823(6)o, V = 675.7(2)'3, Mr = 270.3, Z = 2, Dc = 1.328 g/cm3, F(000) = 284, (MoK = 0.096 mm-1, R = 0.0537 and wR = 0.2189 for compound 1; and monoclinic, P21/n, a = 11.7162(6), b = 9.0042(6), c = 22.908(2) ', = 99.505(1)°, V = 2383.5(3) '3, Mr = 461.50, Z = 4, Dc = 1.286 g/cm3, F(000)= 976, (MoK = 0.091 mm-1, R = 0.0464 and wR = 0.1462 for compound 2. The molecule of compound 1 dialdehyde is located at the crystallographic inversion center nearby the midpoint of C8-C8A single bond. The three chains in the molecule of compound 2 trialdehyde are of non-crystallographic pseudo-C3 symmetry, and each of them is quite planar.     

Dianion approach to chiral cyclopropene carboxylic acids

[reaction: see text] In this Letter, we describe a general method for preparing the dianions of cyclopropene carboxylic acids, and we show that their subsequent reactions with electrophiles provide a general means for selectively introducing diverse types of functional groups. This provides a general method for the synthesis of chiral 1,2-disubstituted cyclopropenes, and opens new avenues for the enantioselective preparation of cyclopropenes.     

Preparation of free-standing nanowire arrays on conductive substrates

By combining supercritical drying technique with AAO template-assisted electrodeposition, noncollapsed, vertically aligned, and free-standing nanowire arrays on a conductive Au film have been fabricated. We also demonstrate that these free-standing nanowire arrays can be feasibly used for fabricating nanowire-based electrically driven devices.     

Syntheses and characterizations of poly[2‐(dimethylamino)ethyl methacrylate]–poly(propylene oxide)–poly[2‐(dimethylamino)ethyl methacrylate] ABA triblock copolymers

A novel, near‐monodisperse, well‐defined ABA triblock copolymer, poly[2‐(dimethylamino)ethyl methacrylate]‐b‐poly(propylene oxide)‐b‐poly[2‐(dimethylamino)ethyl methacrylate], was synthesized via oxyanion‐initiated polymerization. The initiator was a telechelic‐type potassium alcoholate prepared from poly(propylene glycol) and KH in dry tetrahydrofuran. The copolymers produced were characterized by Fourier transform infrared, ¹H NMR, and gel permeation chromatography (GPC). GPC and ¹H NMR analyses showed that the products obtained were the desired copolymers, with narrow molecular weight distributions (ca. 1.09–1.11) very close to that of the original poly(propylene glycol). ¹H NMR, surface tension measurements, and dynamic light scattering all indicated that the triblock copolymer led to interesting aqueous solution behaviors, including temperature‐induced micellization and very high surface activity. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 624–631, 2002; DOI 10.1002/pola.10144