Oxidative addition of some geminal halonitroalkanes to iridium(I) and platinum(0) compounds

Oxidative addition of 1-chloro-1-nitroethane to trans-IrCl(CO)-[P(CH₃)₂C₆H₅]₂ followed by treatment of the initial product with pyridine yields a new iridium(III) complex IrCl(py)[COC(NO₂)CH₃][P(CH₃)₂C₆H₅]₂, whose structure has been confirmed by X-rays crystallography. Two intermediate products have been observed by NMR spectroscopy; their structures have been tentatively assigned. The reaction of the corresponding bromine derivatives yields two isomers of the composition IrBr₂(CO)[CH(NO₂)CH₃][P(CH₃)₂C₆H₅]₂, and these are not affected by pyridine. The reaction of 1-chloro-1-nitroethane with Pt[P(C₆H₅)₃]₄ takes a completely different course in that yields nitrorethane and cis-PtCl₂[P(C₆H₅)₃]₂ as the main products, with no detectable formation of the products of oxidation addition. A brief mechanistic investigation points towards the participation of radicals and radical anions as transient intermediates and a mechanism is proposed which explains most of the experimental results.     

The effect of electronegative atoms on the structures of hydrocarbons. ab initio calculations on molecules containing fluorine or (carbonyl) oxygen

A series of ab initio calculations have been carried out, using the 4-21G basis set. Ethane and propane were first studied to obtain reference points. The effect of adding an electronegative atom (fluorine, or carbonyl oxygen) onto the framework was then studied as a function of the torsional angle about the single bond. Some pronounced trends in structural changes were observed, and these can in part be correlated with hyperconjugative effects. For example, fluoroethane has bond lengths which are shorter than those in ethane itself, by 0.024 Åin the C C bond, and 0.003 Åin the α C H bonds. These changes are essentially torsionally independent. On the other hand, in propionaldehyde, the C C bond length of the methyl group and the C H bond lengths of the hydrogens attached to the alpha carbon vary as a function of the torsion angle. If the methyl C C bond in the carbonyl plane is taken as a reference, the bond stretches .016 Åwhen the torsion angle is increased to 90°, an α C H bond similarly stretches up to .007 Å. Many of these geometric changes are large, well beyond the experimental errors in modern measurements.     

Optimization and validation of a capillary zone electrophoretic method for the analysis of several angiotensin-II-receptor antagonists

We optimized a capillary zone electrophoretic method for separation of six angiotensin-II-receptor antagonists (ARA-IIs): candesartan, eprosartan, irbesartan, losartan potassium, telmisartan, and valsartan. A three-level, full-factorial design was applied to study the effect of the pH and molarity of the running buffer on separation. Combination of the studied parameters permitted the separation of the six ARA-IIs, which was best carried out using 60 mM sodium phosphate buffer (pH 2.5). The same system can also be applied for the quantitative determination of these compounds, but only for the more soluble ones. Some parameters (linearity, precision and accuracy) were validated.     

Synthesis of 1,1-diarylethylenes from an α-stannyl β-silylstyrene

The synthesis of a family of 1,1-diarylethylenes from an α-stannyl β-silylstyrene through a combination of a Stille coupling and a protodesilylation reaction is described. This approach avoids the problematic cine-substitution, which is a well documented side reaction during the palladium-assisted elaboration of α-substituted vinylstannanes to 1,1-disubstituted ethylenes.     

Implementation of an expert system for the qualitative interpretation of X-ray fluorescence spectra

The implementation of an expert system for the automated qualitative interpretation of energy-dispersive x-ray spectra is discussed. The first step in the interpretation process is the extraction of the relevant data from the spectrum, which is done by a preprocessor program, written in FORTRAN. The expert system itself consists of three parts. The knowledge base contains specific information on energy-dispersive x-ray fluorescence spectrometry presented in the form of IF/THEN rules. The data base contains the reduced spectral data and an array of certainty factors associated with each element; the certainty factor for an element represents the probability of its being present in the sample from which the spectrum was taken. Finally, the inference engine performs manipulation of the knowledge. For a particular state of the data base, the certainty factors for all the elements are iteratively modified until convergence is reached by using the rules from the knowledge base. During each cycle, the inference engine selects one rule from the knowledge base and executes it. Rules are selected on the basis of the chemical elements contained in their IF part and according to their previously assigned focus levels. Execution of the THEN part of the selected rule modifies the certainty factors of a number of elements. At the end of the interpretation session, the system lists the elements which have a high probability of being present in the sample. Optionally, the user can be provided with explanations of the reasoning steps taken during the interpretation. Application of the expert system to a particular spectrum shows that it is useful for the reliable interpretation of spectral data obtained from electron microprobe analysis of industrial aerosol particles.     

Orthogonality and similarity within silica-based reversed-phased chromatographic systems

The starting point of this study was a current set of 32 chromatographic systems used to select initial conditions for method development to determine the impurity profile of a drug. The system exhibiting the best selectivity is then selected for further method development. In this current set eight silica-based phases are applied in conjunction with four mobile phases at different pH. In order to save time and resources, the possibilities for a meaningful subset selection were investigated. The most differing systems in terms of selectivity, in other words only the most orthogonal systems, need to be selected. Since the stationary phases are all silica-based, the selectivity differences are examined within a more homogeneous group than if, for instance, also zirconia- or polymer-based columns would be involved. To select the subset of systems also the best overall separation performances are taken into account. The selection is based both on the HPLC-DAD data of a generic set of 68 drugs, and on the LC-MS-DAD results for a mixture of 15 drugs, less different in structure. The orthogonality is evaluated using weighted-average-linkage dendrograms and color maps, both created from the Pearson-correlation coefficients r between normalized retention times r. The Derringer's desirability functions are applied to define the systems with the best overall separation performances. Proposals for different representative subsets of the initial 32 systems are made.     

Aromatic protonation—4: On the 1H-2H exchange of three 9-n-alkylanthracenes on reaction with CF3CO2[2H] and FSO3[2H]

The reactions of 9-methyl-, 9-ethyl- and 9-propyl-anthracene with CF₃CO₂[²H] in C[²H]Cl₃ and with FSO₃[²H] in SO₂ClF have been investigated. Using 4 equivalents of CF₃CO₂[²H] at 50° ¹H-²H exchange was observed only for the 10-H and the side-chain α-hydrogens, and on using 8 and 12 equivalents at 50° also for the aromatic α-hydrogens. Treatment of the substrates with FSO₃[²H] at -60° leads to the stable 9-alkyl-[10-²H]-10-anthracenium ions. On warming up to ?25° a slow ¹H-²H exchange of only the 10-¹H of these anthracenium ions is observed. A mechanism for the ¹H-²H exchange of the aromatic and the side-chain α-hydrogens of the 9-alkylanthracenes is presented.     

Dérivés propargyliques,XII et dérivés de la décahydroquinoléine,II Alkynyl-4, alkényl-4 et alkyl-4-décahydroquinolinols-4 N-substitués

The authors describe the synthesis of decahydro-4-quinolinones and N-substituted 4-alkynyl-, 4-allyl- and 4-alkyldecahydro-4-quinolinols and discuss the stereochemical problems of this compounds.     

The adsorption of endothelin 1 to phospholipids is governed by electrostatic interactions: A monolayer and fluorescence study

In order to elucidate the influence on the lipidic environment on the recognition process of its membrane associated receptor, the interactions of the vasoconstrictor peptide endothelin 1 with various phospholipids have been investigated using different lipidic model membranes: monolayers at constant surface pressure, vesicles and micelles. A monolayer study of ET1 adsorbed onto the water surface has shown that the C-terminus of the peptide points towards the aqueous phase. Penetration measurements into lipidic monolayers indicate that ET1 adsorbs to phospholipids with an orientation similar to that of the air–water interface and fluorescence measurements are in agreement with such an orientation of the peptide. This adsorption is selective for neutral phospholipids and indicates that the nature of the phospholipid headgroups is of major importance for the approach of the membrane associated receptor.     

Experimental analysis and modified rotor description of the infrared fundamental band of HCl in Ar, Kr, and Xe solutions

We report an experimental study of the rotovibrational fundamental PQR-band shapes in the IR absorption spectra of HCl dissolved in condensed rare gases in a wide range of temperatures. The effective vibrational frequencies are determined from analysis of the fine rotational structure partially resolved in the band wings. The central Q-branch components appear redshifted with respect to the effective vibrational frequencies, their shifts in different solvents found to match the HCl stretching mode shifts in binary Rg...HCl van der Waals heterodimers. Theoretical quasi-free rotor and modified rotor models are applied to describe evolution of the band profiles at changing thermodynamic conditions. Both models are shown to reproduce equally well the observed spectral density distributions in the band wings. However, the modified rotor formalism that accounts for depopulation of the lower-energy rotational solute states provides better agreement with the experiment in the range of the P- and R-branch maxima. We surmise that the Q branches separated from the measured spectral profiles are formed by transitions between rotationally hindered states of diatomic molecules coupled to the solvent by the local anisotropy of the interaction potential.