Spin Crossover in Nickel(II) Tetraphenylporphyrinate via Forced Axial Coordination at the Air/Water Interface

Coordination-induced spin crossover (CISCO) in nickel(II) porphyrinates is an intriguing phenomenon that is interesting from both fundamental and practical standpoints. However, in most cases, realization of this effect requires extensive synthetic protocols or extreme concentrations of extra-ligands. Herein we show that CISCO effect can be prompted for the commonly available nickel(II) tetraphenylporphyrinate, NiTPP, upon deposition of this complex at the air/water interface together with a ruthenium(II) phthalocyaninate, CRPcRu(pyz)₂, bearing two axial pyrazine ligands. The latter was used as a molecular guiderail to align Ni···Ru···Ni metal centers for pyrazine coordination upon lateral compression of the system, which helps bring the two macrocycles closer together and forces the formation of Ni–pyz bonds. The fact of Ni(II) porphyrinate switching from low- to high-spin state upon acquiring additional ligands can be conveniently observed in situ via reflection-absorption UV-vis spectroscopy. The reversible nature of this interaction allows for dissociation of Ni–pyz bonds, and thus, change of nickel cation spin state, upon expansion of the monolayer.     

Terahertz oscillations in mercury cuprate superconductors

It has been recently reported that the three-dimensional Bose-Einstein condensation of the quasi-particles is valid for the mercury cuprates at liquid helium temperature. In this study, the validity of the interlayer theory in three dimensions has been investigated for optimally oxygen-doped mercury cuprates at the temperature interval of 0–15 K. Furthermore, some thermodynamic and electrodynamics parameters of mercury cuprates have been calculated for both the under-doped and the over-doped samples at the vicinity of 4.2 K. Moreover, it has been determined that the superconducting system behaves as a terahertz wave cavity regardless of the oxygen doping concentration.     

Microwave-Accelerated Metal-Enhanced Fluorescence (MAMEF): Application to Ultra Fast and Sensitive Clinical Assays

In this rapid communication we describe an exciting platform technology that promises to fundamentally address two underlying constraints of modern assays and immunoassays, namely sensitivity and rapidity. By combining the use of Metal-enhanced Fluorescence (MEF) with low power microwave heating (Mw), we can significantly increase the sensitivity of surface assays as well as >95% kinetically complete the assay within a few seconds. This technology is subsequently likely to find significant importance in certain clinical assays, such as in the clinical assessment of myoglobin, where both the assay rapidity and sensitivity are paramount for the assessment and treatment of acute myocardial infarction.     

Synthesis of 2-aryl-1,2,3,4-tetrahydroquinazolin-1-ols and their conversion to 7-aryl-9H-6-oxa-5,8-diaza-benzocycloheptenes

2-Aminobenzylamine was reacted with corresponding aromatic or heteroaromatic aldehydes to give 1,2,3,4-tetrahydroquinazolines 1 the oxidation of which with H₂O₂-tungstate in methanol led to the formation of the corresponding 1,2,3,4-tetrahydroquinazolin-1-ols 2. A one-pot procedure involving the treatment of the in situ formed quinazoline 1 with H₂O₂-tungstate again led to the formation of 2. Compounds 2 react with 2 equiv of aryl isocyanate in toluene at room temperature to produce compounds 3. The probable mechanism of the ring-expanding carbamoylation of quinazolin-1-ols 2 to 6-oxa-5,8-diaza-benzocycloheptenes 3 is discussed.     

Synthesis,Characterization and Antimicrobial Activity of a New Aromatic Sulfonyl Hydrazone Derivative and Its Transition Metal Complexes

In this study, benzenesulfonicacid‐1‐methylhydrazide (bsmh) derivatives such as 2‐hydroxy‐1‐naphtaldehydebenzenesulfonylhydrazone (Hnafbsmh) and its Ni(II), Pd(II), Pt(II), Cu(II), Co(II) complexes were synthesized. The structures of these complexes were investigated using elemental analyses (FT‐IR, LC‐MS, UV‐VIS), magnetic susceptibility and conductivity measurement techniques. The complexes were found to have general compositions [ML₂]. All the synthesized complexes were evaluated in vitro as antimicrobial agents against representative strains of six gram‐positive and four gram‐negative bacteria and as an antifungal agent by disc diffusion methods. All the bacteria and fungi studied were screened against some commercial antibiotics to compare them with our chemical's zone diameters.     

Preparation and characterization of In<Subscript>2</Subscript>S<Subscript>3</Subscript> semiconductor thin films using the sol–gel method

This study describes the In₂S₃ semiconductor thin film coating on glass substrate by sol–gel method. The In₂S₃ thin film samples were prepared and examined by the X-ray diffraction (XRD), the UV–visible optical absorption and transmission study, and the Scanning Electron Microscope (SEM) image analyses. The XRD analysis results show that the In₂S₃ semiconductor thin films prepared by sol–gel method is formed at T~360–520 °C temperature interval. Band gap energy and optical absorption spectrum analysis of the In₂S₃ thin films reveal that Eg~2.51 eV for the In₂S₃ thin films. According to the EDX result the film was In-rich with the In/S = 1.42 ratio. The thickness of prepared In₂S₃ layer is about 400 nm.     

Angular-dependent metal-enhanced fluorescence from silver colloid-deposited films: opportunity for angular-ratiometric surface assays

We describe an exciting opportunity for Metal-Enhanced Fluorescence (MEF)-based surface assays using an angular-ratiometric approach to the observed enhanced emission from fluorophores in close proximity to silver colloids deposited on glass substrates. This approach utilizes the radiationless energy transfer (coupling) between the excited states of the fluorophore and the induced surface plasmons of the silver colloids, and the subsequent angular-dependent fluorescence emission from the fluorophore-silver colloid system. Since MEF is related to surface plasmons' ability to scatter light, angular-dependent light scattering from three different silvered surfaces and glass substrates were investigated using two common excitation angles, 45 and 90 degrees . The scattered light from silvered surfaces with a high loading was observed at wider angles on both sides of the glass substrates, while forward scattering (from the back of the glass) was dominant for the silvered surfaces with low loading, as explained by both Mie and Rayleigh theories. When silver colloids were placed between the fluorophore and glass interface, the coupled fluorescence emission through the higher refractive index glass (and in air), increased in an angular-dependent fashion, following closely the angular-dependent light scattering pattern of the silver colloids themselves. Similar observations for fluorescence emission from fluorophores deposited onto glass surfaces alone were made, but at much narrower angles on both sides of the fluorophore-glass interface and were simply explained by Lambert's cosine law. As the loading of silver on glass was increased, the enhanced fluorescence emission was observed at wider angles (towards 0 and 180 degrees ) at both sides of the silvered surfaces. Glass surfaces without silver colloids were used as control samples to demonstrate the benefits of MEF for enhancing fluorescence signatures in an elegant, angular-dependent fashion. Finally, the utility of the angular-dependent MEF phenomenon for intensity-based angular-ratiometric surface assays is demonstrated.     

Solvent-Impregnated Resins Based on the Mixture of (2-Diphenylphosphoryl)-4-ethylphenoxy)methyl) diphenylphosphine Oxide and Ionic Liquid for Nd(III) Recovery from Nitric Acid Media

Novel solvent-impregnated resins (SIRs) were prepared by treatment of styrene–divinylbenzene copolymer (LPS-500) with mixtures of the promising polydentante extractant (2-diphenylphosphoryl)-4-ethylphenoxy)methyl)diphenylphosphine oxide (L) and an ionic liquid [C₄mim]⁺[Tf₂N]⁻for the extraction chromatography recovery of Nd(III) from nitric acid solutions. It was shown that introduction of the ionic liquid into the SIR composition results in considerable enhancement of the Nd(III) recovery efficiency compared with resin impregnated only by L in slightly acidic media. The influence of the L: ionic liquid molar ratio in the SIRs composition, their percentages, concentration of metal and HNO₃ in the eluent, and acid type on the value of synergistic effect and adsorption efficiency of Nd(III) recovery was studied. The SIR containing 40% of mixture of L and [C₄mim]⁺[Tf₂N]⁻ with molar ratio 2:1 turned out to be the most efficient. The selectivity of Nd(III) separation from light and heavy rare-earth elements was studied and the optimal conditions of Nd(III) adsorption recovery and stripping by this SIR were chosen. It was found that in recovery efficiency of Nd(III) developed SIR exceeded the SIR containing Cyanex 923 (a mixture of monodentate trialkylphosphine oxides) and [C₄mim]⁺[Tf₂N]⁻.     

Electrochemical Evaluation of Titanium (IV) Oxide/Polyacrylonitrile Electrospun Discharged Battery Coals as Supercapacitor Electrodes

The TiO₂ nanoparticles are electrospun with polyacrylonitrile (PAN) polymer solution onto the discharged battery coal (DBC) electrode and the results are evaluated as a supercapacitor. The morphology and chemical composition of the synthesized TiO₂ nanoparticles and PAN+TiO₂ nanocomposite fibers were characterized by Scanning electron microscopy, thermogravimetry and FTIR analysis. Supercapacitor measurements and electrochemical characterizations of the electrodes examined by cyclic voltammetry and electrochemical impedance spectroscopy. Electrochemical measurements showed that the best current value was obtained from PAN and TiO₂ coated DBC. The performances of both PAN and PAN+TiO₂ coated DBC electrodes were investigated as supercapacitors. PAN+TiO₂/DBC showed the best specific capacitance value of 156.00 F g⁻¹ and PAN/DBC showed 74.93 F g⁻¹. In addition, PAN+TiO₂/DBC exhibited reliable stability performance over 2000.00 cycles.     

Proton-conducting properties of the membranes based on poly(vinyl phosphonic acid) grafted poly(glycidyl methacrylate)

Proton-conducting properties of the graft copolymer electrolytes were examined throughout this work. The homopolymers poly(glycidyl methacrylate), PGMA and poly(vinyl phosphonic acid), PVPA were synthesized by free-radical polymerizations of the monomers glycidyl methacrylate, GMA, and vinyl phosphonic acid, VPA, respectively. The graft copolymers were produced by grafting of PVPA onto PGMA via ring opening of ethylene oxide groups. To examine the influence of the concentration of VPA on the proton conductivity, several graft copolymers were produced at various stoichiometric ratios with respect to monomer repeat units. The materials were characterized by FT-IR and ¹H NMR spectroscopy and the thermal properties were studied by thermogravimetry (TG) and differential scanning calorimetry (DSC). The TGA results demonstrated that the samples are thermally stable up to at least 150 °C. The proton conductivities of humidified and dry samples were studied via impedance spectroscopy. In the anhydrous state, the proton conductivity of P(GMA)-graft-P(VPA)₁₀ was 5 × 10^? 5 S/cm at 150 °C. The proton conductivity of the same material increased with the humidity content and reached to 0.03 S/cm at 80 °C under 50% of RH, which approached to that of Nafion^® at the same humidification level.