Sensitive electrochemical detection of the hydroxyl radical using enzyme-catalyzed redox cycling

Enzyme-catalyzed signal amplification was introduced to the electrochemical detection of the OH radical. In the presence of phenol as a trapping agent, glucose as a substrate, and pyrroloquinoline quinone-containing glucose dehydrogenase (PQQ-GDH) as a catalyst, the current signal for the trapping adducts (catechol and hydroquinone) produced by the hydroxylation of phenol could be amplified and detected sensitively. The limit of detection (S/N = 3) for catechol was 8 nM. The trapping efficiency of phenol was also estimated.     

Validated method using liquid chromatography-electrospray ionization tandem mass spectrometry for the determination of contamination of the exterior surface of vials containing platinum anticancer drugs

Contamination of the exterior surface of vials of cytostatic drugs by the drugs themselves is a potential hazard to human health. This study developed a validated method using liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS) for the determination of contamination of the exteriors of vials of cisplatin and carboplatin. Large Alpha^® sampling swabs were employed to wipe the vial exterior. Cisplatin or carboplatin and gold(III) as an internal standard were derivatized by N,N-diethyldithiocarbamate (DDTC). Pt(DDTC)₃⁺ and Au(DDTC)₂⁺ were monitored by the respective transitions of m/z 639.3-490.9 and 493.0-345.0, respectively. Each separation was completed within 9 min using a 3 μm particle ODS-column. Calibration curves for cisplatin and carboplatin were linear over concentration ranges of 30-10,000 and 30-30,000 pg vial⁻¹, respectively. The accuracies and precisions were 96.1-102.5% and within 8.2% for intra-assay and 99.6-103.3% and within 7.6% for inter-assay, respectively. Their lower limit of quantification was 30 pg vial⁻¹. Amounts of 0.17-17.0 ng vial⁻¹ as cisplatin and 0.48-794 ng vial⁻¹ as carboplatin were detected from the exterior surface of the vials. This validated method using LC-ESI-MS/MS for the determination of platinum anticancer drugs is helpful for monitoring contamination of the exterior surface of drug vials.     

Selective chemiluminescence method for monitoring of vitamin K homologues in rheumatoid arthritis patients

Vitamin K is a fat-soluble vitamin involved in blood coagulation and bone metabolism. The detection and monitoring of vitamin K homologues in rheumatoid arthritis (RA) patients is a challenging problem due to the smaller concentrations of vitamin K and the presence of several interfering medications. Therefore, this study aimed to develop a new highly sensitive and selective chemiluminescence (CL) method designated to quantify vitamin K homologues in plasma of RA patients including phylloquinone (PK, vitamin K₁), menaquinone-4 (MK-4, vitamin K₂) and menaquinone-7 (MK-7, vitamin K₂). The method was based on the unique photochemical properties of vitamin K homologues that were exploited for selective luminol CL reaction. The correlation coefficients of 0.998 or more were obtained in the concentration ranges of 0.1-100 ng mL⁻¹ vitamin K homologues. The detection limits were 0.03-0.1 ng mL⁻¹ in human plasma for vitamin K homologues. The developed HPLC-CL system was successfully applied for selective determination of vitamin K homologues in plasma of RA patients. The developed method may provide a useful tool for monitoring vitamin K homologues in different clinical studies such as RA, osteoporosis and hepatocellular carcinoma in which vitamin K is intervented.     

Structural interconversion and regulation of optical properties of stable hypercoordinate dipyrrin-silicon complexes

Novel pentacoordinate dipyrrin-silicon complexes showed efficient red or near-IR fluorescence, and the structural interconversion between silanol and siloxane derivatives resulted in significant changes in the optical properties.     

Unique inclusion properties of crystalline powder p-tert-butylthiacalix[4]arene toward alcohols and carboxylic acids

Powdery crystals of p-tert-butylthiacalix[4]arene (2) selectively include EtOH from 1:1 mixtures of MeOH-EtOH and EtOH-PrOH, and EtCO(2)H from HCO(2)H-EtCO(2)H. On the other hand, no acid is included from HCO(2)H-MeCO(2)H, even though MeCO(2)H is included from the neat acid. The origins of these phenomena are discussed based on X-ray analysis of inclusion crystals prepared separately by crystallization.     

Use of tube radial distribution of ternary mixed carrier solvents for introduction of absorption reagent for metal ion separation and online detection into capillary

When ternary mixed solvents consisting of water-hydrophilic/hydrophobic organic solvents are fed into a micro-space under laminar flow conditions, the solvent molecules are radially distributed in the micro-space. The specific fluidic behavior of the solvents is called the "tube radial distribution phenomenon (TRDP)". A novel capillary chromatography method was developed based on the TRDP that creates the inner major and outer minor phases in a tube, where the outer phase acts as a pseudo-stationary phase. This is called "tube radial distribution chromatography (TRDC)". In this study, Chrome Azurol S as an absorption reagent was introduced into the TRDC system for metal ion separation and online detection. The fused-silica capillary tube (75 μm id and 110 cm length) and water-acetonitrile-ethyl acetate mixture (3:8:4 volume ratio) including 20 mM Chrome Azurol S as a carrier solution were used. Metal ions, i.e. Co(II), Cu(II), Ni(II), Al(III), and Fe(III), as models were injected into the present TRDC system. Characteristic individual absorption characteristics and elution times were obtained as the result of complex formation between the metal ions and Chrome Azurol S in the water-acetonitrile-ethyl acetate mixture solution. The elution times of the metal ions were examined based on their absorption behavior; Co(II), Ni(II), Al(III), Fe(III), and Cu(II) were eluted in this order over the elution times of 4.7-6.8 min. The elution orders were determined from the molar ratios of metal ion to Chrome Azurol S and Irving-Williams series for bivalent metal ions.     

Direct catalytic enantio- and diastereoselective aldol reaction of thioamides

A direct catalytic asymmetric aldol reaction of thioamides using a soft Lewis acid/hard Br?nsted base cooperative catalyst comprising (R,R)-Ph-BPE/[Cu(CH(3)CN)(4)]PF(6)/LiOAr is described. Exclusive enolate generation from thioacetamides through a soft-soft interaction with the soft Lewis acid allowed for a direct aldol reaction to α-nonbranched aliphatic aldehydes, which are usually susceptible to self-condensation under conventional basic conditions. A hard Lewis basic phosphine oxide has emerged as an effective additive to constitute a highly active ternary soft Lewis acid/hard Br?nsted base/hard Lewis base cooperative catalyst, enabling a direct enantio- and diastereoselective aldol reaction of thiopropionamides. Strict control of the amount of the hard Lewis base was essential to drive the catalytic cycle efficiently with a minimized retro-aldol pathway, affording syn-aldol products with high stereoselectivity. Divergent transformation of the thioamide functionality is an obvious merit of the present aldol methodology, allowing for a facile transformation of the aldol product into the corresponding aldehyde, ketone, amide, amine, and ketoester. An aldehyde derived from the direct aldol reaction was subjected to a second direct aldol reaction, which proceeded in a catalyst-controlled manner to provide 1,3-diols with high stereoselectivity.     

Effects of Temperature and Mobile Phase Condition on Chiral Recognition of Poly(l-phenylalanine) Chiral Stationary Phase

Characteristics of the chiral stationary phase with poly(l-phenylalanine) peptide selector, which was in ??-helical state, was reported. Since environmental factors affect peptide conformation, the changes in enantioselectivity were examined depending on column temperature and mobile phase conditions (ionic strength, pH, mobile phase composition). Column temperature and pH drastically affected the enantioselectivity. Based on these changes, the relation between chiral recognition and secondary structure of the peptide selector was discussed. The column stability during sequential analysis under different separation conditions was also evaluated.     

Synthesis of mono- and 1,3-diaminocalix[4]arenes via Ullmann-type amination and amidation of 1,3-bistriflate esters of calix[4]arenes

Practical methods are described for the preparation of monoamines 4 and 1,3-diamines 5, bearing one or two amino group(s) instead of the hydroxy group(s) at the 28-position or at both the 26- and 28-positions of p-tert-butylcalix[4]arene (1a) and p-tert-butylthiacalix[4]arene (1b), via the Ullmann-type amination or amidation. Thus, the copper-catalyzed or mediated amination of the 1,3-bistriflate ester (2a) of 1a with benzylamine affords either mono(benzylamino) triflate 7a or 1,3-bis(benzylamine) 8 in a high yield, depending on the reaction conditions. On the other hand, the 1,3-bistriflate ester (2b) of 1b resists disubstitution and produces, under stoichiometric conditions, mono(benzylamino) triflate 7b. The disubstitution of 2b is achieved by amidation with tosylamide, giving 1,3-bis(tosylamide) 17b. The hydrogenolysis of the benzylamino moiety of 7a, followed by the hydrolysis of the Tf moiety, affords monoamine 4a, while the hydrogenolysis of 8 affords 1,3-diamine 5a. The amino moiety of 7b can be deprotected under acidic conditions to give, after hydrolysis, monoamine 4b. The hydrolysis of 17b affords 1,3-diamine 5b. The overall yields of compounds 4a, 4b, 5a, and 5b are 72%, 45%, 78%, and 24%, respectively, based on commercially available compounds 1 and are much higher than the ones previously reported in the literature.