Instantaneous work hardening behaviour of two-phase tungsten heavy alloys: a phenomenological approach

ABSTRACT

The present work describes a phenomenological approach to explain the instantaneous behaviour of tungsten heavy alloys (WHAs) in heat-treated and swaged conditions. The strengths and elongation values of heat-treated materials are lower and higher than those of the swaged samples respectively. The heat-treated materials exhibit two slopes in true stress–true plastic strain curves and follow the Ludwigson constitutive equation. On the other hand, swaged materials display a single slope and adhere to typical Swift constitutive equation. The latter reflect the presence of pre-strain in the materials due to swaging deformation. The fracture surfaces in heat-treated materials consist of W-W decohesion along with matrix rupture and W-cleavage, while swaged samples consist of mainly W-cleavage. Both the materials display three typical stages (I, II and III) of work hardening. The second derivatives of true stress–true plastic strain curves of these alloys exhibit a perfect parabola although the nature of true stress–true strain as well as true stress–true plastic strain curves is quite different in heat-treated and swaged materials. This has been observed for the first time in WHAs consisting of matrix and W-grains. The shape of the parabola is simple and easy to fit. The fitting parameters of parabolas have been successfully employed to explain the flow behaviour of a large number of tungsten heavy alloys having two-phase microstructure in different processing conditions.     

Stereoselective synthesis of beta-substituted phenylalanine-beta-phenylisoserine-derived tripeptides using N-cinnamoyl-L-proline as template: synthesis of structural analogues of HIV protease inhibitors

N-Cinnamoyl-L-proline can be used as a template on which beta-substituted phenylalanine and beta-phenylisoserine residues can be synthesized leading to tripeptide derivatives as structural analogues of HIV protease inhibitors.     

An empirical fit to estimated neutron emission cross sections from proton induced reactions

Neutron emission cross section for various elements from⁹Be to²⁰⁹Bi have been calculated using the hybrid model code ALICE-91 for proton induced reactions in the energy range 25 MeV to 105 Me V. An empirical expression relating neutron emission cross section to target mass number and incident proton energy has been obtained. The simple expression reduces the computation time significantly. The trend in the variation of neutron emission cross sections with respect to the target mass number and incident proton energy has been discussed within the framework of the model used.     

ROLE OF MEROCYANINE DYE AS A PROTON PUMP IN PHOTOVOLTAGE GENERATION

A novel photoelectrochemical cell using a proton pump mechanism in the aggregated planar structure of oxidised cholesterol incorporating merocyanine dyes is reported. Lipid dye binding, as verified from spectral studies and photoisomerisation of the dye, is responsible for this photovoltage generation whose magnitude and storage duration are related to the equilibrium constant of dye-lipid binding through an empirical formula.     

Analytical model for the magnetophoretic capture of magnetic microspheres in microfluidic devices

Magnetic microspheres are used as mobile substrates in micro-total-analysis systems (μTAS), since the particles can be selectively functionalized to attach different bioconjugates and can be precisely manipulated using external magnetic field gradients. A large number of MEMS-based bio-analytical devices employ magnetophoretic separation as an important step during their operation. An analytical technique is proposed in this paper that describes the magnetophoretic transport of magnetic microspheres under an imposed magnetic field when there is a pressure-driven or electroosmotic flow through a microchannel. Successful magnetophoretic capture occurs if the strength of the field-inducing magnetic dipole exceeds a critical value, or if the particles are larger than a critical size. The magnetophoretic separator performance is characterized in terms of capture efficiency. The analysis shows that the capture efficiency is a function of two independent non-dimensional parameters, λ and γ that in turn involve all the physical design and operating parameters of the microfluidic separator, e.g., the dipole strength, particle size and susceptibility, fluid viscosity and velocity, channel height, and the separation of the dipole. Parametric plots of capture efficiency as function of λ and γ helps in choosing the right design and operation parameter of a practical microfluidic separator for a target level of performance.     

Fully automated radiosynthesis of [<Superscript>18</Superscript>F]Fluoromisonidazole with single neutral alumina column purification: optimization of reaction parameters

1-H-1-(3-[¹⁸F]fluoro-2-hydroxypropyl)-2-nitroimidazole ([¹⁸F]FMISO), is the most used hypoxia-imaging agent in oncology and we have recently reported a fully automated procedure for its synthesis using the Nuclear Interface FDG module and a single neutral alumina column for purification. Using 1-(2′-nitro-1′-imidazolyl)-2-O-tetra-hydropyranyl-3-O-toluenesulfonylpropanediol (NITTP) as the precursor, we have investigated the yield of [¹⁸F]FMISO using different reaction times, temperatures, and the amount of precursor. The overall yield was 48.4 ± 1.2% (n = 3), (without decay correction) obtained using 10 mg NITTP with the radio-fluorination carried out at 145 °C for 3 min followed by acid hydrolysis for 3 min at 125 °C in a total synthesis time of 32 ± 1 min. Increasing the precursor amount to 25 mg did not improve the overall yield under identical reaction conditions, with the decay uncorrected yield being 46.8 ± 1.6% (n = 3), but rather made the production less economical. It was also observed that the yield increased linearly with the amount of NITTP used, from 2.5 to 10 mg and plateaued from 10 to 25 mg. Radio-fluorination efficiency at four different conditions was also compared. It was also observed by radio thin layer chromatography (radio-TLC) that the duration of radio-fluorination of NITTP, not the radio-fluorination temperature favoured the formation of labeled thermally degraded product, but the single neutral alumina column purification was sufficient enough to obtain [¹⁸F]FMISO devoid of any radiochemical as well as cold impurities.     

Radiation efficiency of unbaffled and perforated plates near a rigid reflecting surface

The accurate prediction of sound radiation from plate-like structures remains a challenging problem. Although the case of a plate set in a rigid baffle can be solved analytically, when the plate radiates sound into free space the problem is more difficult to solve; nevertheless, several approaches have been proposed to determine the sound radiation from an unbaffled plate. The present study extends the consideration to the situation of an unbaffled plate which is located close to a rigid reflecting surface. For this purpose, Laulagnet's model for the radiation efficiency of an unbaffled plate is extended by modifying the Green's function to include an image source due to the reflecting surface. The results show that, depending on the distance between the plate and the rigid surface, the radiation efficiency is considerably reduced at low frequencies. Additional reduction of sound radiation can be achieved by introducing perforation to the plate. However, at higher frequencies, the radiation efficiency is amplified relative to that for the plate in the absence of the rigid surface, both with and without perforation. These results have also been validated experimentally.     

Separation of Palladium by Extraction Chromatographic Technique Using Cyanex 471X (Tri Isobutyl Phosphine Sulfide) on Chromosorb-102

In a preliminary study performed with the waste rocks from the future uranium mine to be explored in Brazil, 106 samples were taken from the eight main lithologies found in the massif and analysed by instrumental neutron activation analysis (INAA) for 20 elements. For samples from the same lithology, a high variability in the concentration of most of the elements was found (coefficient of variation larger than 20%), which might be attributed to either insufficient homogenisation of minerals or to local variation within lithology. The hypothesis that the variability within the lithology does not have an influence to the total variability was tested by analysing 5 replicates of the 5 most contrasting samples from the predominant lithology (plagioclase-microcline-gneiss), chosen after applying statistical evaluation (principal components and cluster analyses). Results indicated that homogenisation of samples was adequate due to low variation among replicates. The hypothesis tested was rejected with a confidence level higher than 99% for all the elements, corroborating the large intra-lithology variability.     

Simultaneous quantification of curcuminoids and xanthorrhizol in Curcuma xanthorrhiza by high-performance liquid chromatography

A new method for simultaneous quantification of curcuminoids and xanthorrhizol (XNT) in Curcuma xanthorrhiza was developed and validated using high-performance liquid chromatography with diode-array UV–Vis detector. The chromatographic separation was achieved on a Phenomenex C18 at room temperature with the mobile-phase acetonitrile ?0.001% formic acid in gradient elution system and delivered at a flow rate of 1?mL/min. Detection wavelength 425?nm was used for curcuminoids and 224?nm for XNT. System suitability, linearity, precision, accuracy, limit of detection, limit of quantitation, and stability were evaluated and were found in good agreement with Association of Official Analytical Chemists guidelines for single-laboratory validation. The proposed method was found to be precise, accurate, and reliable and also could be applied for the simultaneous quantitative analysis of curcuminoids and XNT in C. xanthorriza raw material and its herbal medicinal product.     

Effect of tellurium promoter on vanadium phosphate catalyst for partial oxidation of n-butane

Te-promoted (1%) vanadium phosphate catalyst (VPDTe) was prepared via VOPO4·2H2O by calcining its precursor VOHPO4·0.5H2O in a flow of n-butane/air.VPDTe catalyst has resulted a higher existence of V5+ phase with V5+/V4+ ratio of 0.23.SEM micrographs show that Te addition altered the arrangement of the platelets from "rose-like" clusters to layer with irregular shape.Te addition has also markedly lowered the reduction activation energies of the vanadium phosphate catalyst as revealed by TPR profile.The amount of active oxygen species associated with V4+ phase of the Te promoted catalyst was significantly higher than those of the unpromoted catalyst.These observations suggest that high mobility and availability of reactive oxygen species contributed to the enhancement of n-butane conversion up to 80% at 673 K,while only 47% over unpromoted catalyst (2400 h-1,1.7% n-butane in air).