Effects of diethanolamine on the evolution of silver/titanium dioxide sol–gel process

In order to clarify the effects of diethanolamine (DEA) in the silver (Ag)/titanium dioxide (TiO₂) sol–gel process, sols with and without DEA, and films derived from these sols were prepared. The samples were investigated by X-ray diffraction, transmission electron microscopy, electron diffraction and optical absorption spectra. The results showed that metallic Ag clusters were formed in the sol with DEA and was absent in the sol without DEA. This indicated that DEA worked not only as the stabilizer but also as the reduce agent in Ag/TiO₂ sol–gel process. After annealed, Ag metallic nanoparticles were generated in the films derived from both the sols with and without DEA. The particles in the films derived from the sol with DEA were smaller than those from the sol without DEA. This can be ascribed to the limitation of the growth of Ag cluster formed in the sol with DEA during heat treatment. Mechanisms for the formation of metallic Ag in the Ag/TiO₂ sols and films were discussed. The effects of DEA in the sols and films were studied in detail.     

Characterisation of nickel–zinc ferrite/silica nanocomposites with low ferrite concentration obtained by an improved modified sol–gel method

The paper presents a study regarding the structure, morphology and magnetic behaviour of x% (Ni_0.65Zn_0.35Fe₂O₄)/(100 − x)% SiO₂ ferrimagnetic nanocomposites for low Ni–Zn ferrite concentration (x = 5, 10, 15, 20 and 30 mass percent) obtained by an improved modified sol–gel method. The obtained gels and nanocomposites have been characterized by fast Fourier transform-infrared (FT-IR) spectrometry, X-ray diffraction (XRD), transmission electron microscopy (TEM) and magnetic measurements (MM). The addition of a supplementary quantity of diol in the synthesis, corresponding to a molar ratio EG : TEOS = 1:1, and the control of the thermal treatment applied to the precursor xerogels tetraethylortosilicate (TEOS)–metal nitrates (MN)–ethylene glycol (EG) leads to fine (~2–9 nm), almost spherical Ni–Zn ferrite nanoparticles homogenously dispersed inside the amorphous SiO₂ matrix. TEM images reveal the fine nature and the narrow size distribution of the ferrite nanoparticles. Nanoparticles diameter increases with the ferrite concentration and with the annealing temperature. For all concentrations of ferrite in SiO₂ and all annealing temperature, we have obtained Ni_0.65Zn_0.35Fe₂O₄ ferrite as single phase (proven by XRD) in the amorphous silica matrix, only after a pre-treatment of synthesized gels, at 573 K, for 3 h. The magnetic behaviour of ferrite nanoparticles in quasi-static magnetic fields is very particular, depending on the annealing temperature and the ferrite content in silica matrix. We have obtained superparamagnetic behaviour for the nanocomposites, for a concentration of 30% ferrite in SiO₂ at high annealing temperature, of 1,273 K.     

Adsorption of CO<Subscript>2</Subscript>-containing gas mixtures over amine-bearing pore-expanded MCM-41 silica: application for CO<Subscript>2</Subscript> separation

Adsorption of CO₂, N₂, CH₄ and H₂ on triamine-grafted pore-expanded MCM-41 mesoporous silica (TRI-PE-MCM-41) was investigated at room temperature in a wide range of pressure (up to 25 bar) using gravimetric measurements. The material was found to exhibit high affinity toward CO₂ in comparison to the other species over the whole range of pressure. Column-breakthrough dynamic measurements of CO₂-containing mixtures showed very high selectivity toward CO₂ over N₂, CH₄ and H₂ at CO₂ concentrations within the range of 5 to 50%. These conditions are suitable for effective removal of CO₂ at room temperature from syngas, flue gas and biogas using temperature swing (TS) or temperature-pressure swing (TPS) regeneration mode. Moreover, TRI-PE-MCM-41 was found to be highly stable over hundreds of adsorption-desorption cycles using TPS as regeneration mode.     

Single component and binary diffusion of n-heptane and toluene in SBA-15 materials

In this work, the diffusion properties of single component n-heptane and toluene as well as their binary mixtures in two SBA-15 samples with different structural characteristics were studied by the standard Zero Length Column (ZLC) technique under three different concentration levels. A theoretical ZLC desorption model considering the Generalized Maxwell-Stefan (GMS) formulation was developed. Using the independently measured single component equilibrium and kinetic parameters, the model was able to reasonably predict experimental binary ZLC desorption curve for countercurrent diffusion of toluene in the presence of n-heptane. However, there was a significant deviation between model prediction results and experimental data for countercurrent desorption of n-heptane in the presence of toluene. The diffusion of n-heptane is reduced by the presence of toluene, regardless of the relative content of micropores in the intrawall pores, while that of toluene is virtually unaffected by the counter-diffusion of n-heptane. The observed phenomena cannot be addressed by the simple model considering the cross term diffusion effect. The structural property of material and the molecular characteristics of probe molecules were used to account for the difference in the behavior between n-heptane and toluene.     

On the use of the ‘uncertainty budget’ to detect dominant terms in the evaluation of measurement uncertainty

In the evaluation of measurement uncertainty, the uncertainty budget is usually used to identify dominant terms that contribute to the uncertainty of the output estimate. Although a feature of the GUF method, it is also recommended as a qualitative tool in MCM by using ‘nonlinear’ equivalents of uncertainty contributions and sensitivity coefficients. In this paper, the use of ‘linear’ and ‘nonlinear’ parameters is discussed. It is shown that when and only when the standard uncertainty of the output estimate is nearly equal to the square root of the sum of the squares of the individual uncertainty contributions, will the latter be a reliable tool to detect the degree of contribution of each input quantity to the measurand uncertainty.     

Isolation and characterization of cellulose nanofibers from four plant cellulose fibers using a chemical-ultrasonic process

Cellulose nanofibers (CNFs) were isolated from four kinds of plant cellulose fibers by a chemical-ultrasonic treatment. The chemical composition, morphology, crystalline behavior, and thermal properties of the nanofibers and their intermediate products were characterized and compared. The CNFs extracted from wood, bamboo, and wheat straw fibers had uniform diameters of 10–40 nm, whereas the flax fibers were not uniformly nanofibrillated because of their initially high cellulose content. The chemical composition of each kind of nanofibers was mainly cellulose because hemicelluloses and lignin were significantly removed during chemical process. The crystallinity of the nanofibers increased as the chemical treatments were applied. The degradation temperature of each kind of nanofiber reached beyond 330 °C. Based on the properties of the CNFs, we expect that they will be suitable for use in green nanocomposites, filtration media and optically transparent films.     

Neutron crystallographic and molecular dynamics studies of the structure of ammonia-cellulose I: rearrangement of hydrogen bonding during the treatment of cellulose with ammonia

The hydrogen bond arrangement in a complex of cellulose with ammonia has been studied using neutron crystallography in combination with molecular dynamics simulations. The O6 atom of the hydroxymethyl group is donor in a highly occupied hydrogen bond to an ammonia molecule. This rotating ammonia molecule is donor in partially occupied and transient hydrogen bonds to the O2, O3 and O6 atoms of the hydroxyl groups of other chains. The hydrogen atom bound to the O3 atom is disordered but it is almost always involved in some type of hydrogen bonding. It is donated in a hydrogen bond most of the time to the O5 atom on the same chain. However, it also rotates away from this O5 atom to be donated to an ammonia molecule part of the time. On the other hand the hydrogen atom bound to the O2 atom is free from hydrogen bonding most of the time. It is donated in a hydrogen bond to the O6 atom on a neighboring chain only with a relatively small probability. These results provide new insights into how hydrogen bonds are rearranged during the conversion of cellulose I to cellulose III_I by ammonia treatment.     

In situ synthesis of plate-like Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles in porous cellulose films with obvious magnetic anisotropy

Nanocomposite cellulose films with obvious magnetic anisotropy have been prepared by in situ synthesis of plate-like Fe₂O₃ nanoparticles in the cellulose matrix. The influence of the concentrations of FeCl₂ and FeCl₃ solutions on the morphology and particle size of the synthesized Fe₂O₃ nanoparticles as well as on the properties of the composite films has been investigated. The Fe₂O₃ nanoparticles synthesized in the cellulose matrix was γ-Fe₂O₃, and its morphology was plate-like with size about 48 nm and thickness about 9 nm, which was totally different from those reported works. The concentration of FeCl₂ and FeCl₃ solution has little influence on the particle size and morphology of the Fe₂O₃ nanoparticles, while the content of Fe₂O₃ nanoparticles increased with the increase of the concentration of the precursor solution, indicating that porous structured cellulose matrix could modulate the growth of inorganic nanoparticles. The unique morphology of the Fe₂O₃ nanoparticles endowed the composite films with obvious magnetic anisotropy, which would expand the applications of the cellulose based nanomaterials.     

Mechanical properties of natural rubber nanocomposites reinforced with cellulosic nanoparticles obtained from combined mechanical shearing,and enzymatic and acid hydrolysis of sisal fibers

In a previous work (Siqueira et al. 2010b) the preparation of cellulosic nanoparticles from sisal fibers using different processing routes, viz. a combination of mechanical shearing, acid and enzymatic hydrolysis was reported. It was shown that the pre-enzymatic hydrolysis treatment of bleached sisal pulp helps the preparation of well individualized rod-like nanocrystals. An amorphous polymer (natural rubber—NR) was chosen as model matrix to investigate the effect of these nanoparticles on the thermo-mechanical properties of nanocomposites. Both tensile tests and dynamic mechanical analyses showed improved stiffness for all nanocomposites. The enzymatic treatment allowed production of a huge range of cellulosic nanoparticles which provided completely different mechanical properties to NR matrix.     

Improving the reproducibility of chemical reactions on the surface of cellulose nanocrystals: ROP of ε-caprolactone as a case study

In our group, we work on the surface modification of cellulose nanocrystals. During this work, we have encountered reproducibility issues when the same reactions were performed on nanocrystals from different hydrolysis batches, indicating a variable surface composition. Given the inherent purity of the nanoparticles themselves, this issue was believed to be due to the presence of adsorbed species at the surface of the nanocrystals blocking reactive sites. To investigate this in detail, nanocrystals from several batches were extracted with different solvents. The effect of these extractions on the surface composition of the nanowhiskers was investigated, followed by its effect on the Surface-Initiated Ring-Opening Polymerization (SI-ROP) of ε-caprolactone. The extracted impurities were analysed by NMR (¹H and ¹³C) and MS, showing a variety of adsorbed species which can be removed by solvent extraction. A Soxhlet extraction using ethanol before the reaction was shown to be the most effective in removing adsorbed low molecular weight organic compounds produced during the hydrolysis, resulting in improved reproducibility between reactions using nanocrystals from different batches, as confirmed by FTIR, elemental analysis and XPS. Extraction with ethanol should thus be performed before all reaction as these adsorbed species can be expected to interfere with all surface modification reactions.