A dynamic finite volume scheme for large-eddy simulation on unstructured grids

In recent years there has been considerable progress in the application of large-eddy simulation (LES) to increasingly complex flow configurations. Nevertheless a lot of fundamental problems still need to be solved in order to apply LES in a reliable way to real engineering problems, where typically finite-volume codes on unstructured meshes are used. A self-adaptive discretisation scheme, in the context of an unstructured finite-volume flow solver, is investigated in the case of isotropic turbulence at infinite Reynolds number. The Smagorinsky and dynamic Smagorinsky sub-grid scale models are considered. A discrete interpolation filter is used for the dynamic model. It is one of the first applications of a filter based on the approach presented by Marsden et al. In this work, an original procedure to impose the filter shape through a specific selection process of the basic filters is also proposed. Satisfactory results are obtained using the self-adaptive scheme for implicit LES. When the scheme is coupled with the sub-grid scale models, the numerical dissipation is shown to be dominant over the sub-grid scale component. Nevertheless the effect of the sub-grid scale models appears to be important and beneficial, improving in particular the energy spectra. A test on fully developed channel flow at Re_τ = 395 is also performed, comparing the non-limited scheme with the self-adaptive scheme for implicit LES. Once again the introduction of the limiter proves to be beneficial.     

DSC analysis of strengthening precipitates in ultrafine Al–Mg–Si alloys

Equal channel angular pressing (ECAP) was carried out on solution annealed samples of Al–Mg–Si–Zr and Al–Mg–Si–Zr–Sc alloys to achieve a substantial grain refinement of the materials. Post ECAP aging was then investigated on the ultrafine grained alloys by DSC and TEM analyses. DSC scans were carried out with heating rates ranging from 5 to 30°C min^–1. Peak identification was performed by the support of literature information and TEM analyses. Precipitation kinetics revealed to be similar for both alloys but the Sc-free alloy showed a recrystallization peak at temperatures ranging from 310 to 340°C, depending on the strain accumulated during ECAP. On the contrary, the Sc-containing alloy showed a greater grain stability. Analyses of peak positions and of activation energies as a function of ECAP passes experienced by the samples revealed large modifications of precipitation kinetics in the ultrafine-grained alloys with respect to the coarse-grained materials.     

Nonlinear optical properties of regioregular main‐chain polyesters

We have prepared new polyesters containing quadratic, nonlinear optical (NLO) active chromophores covalently incorporated into the main chain. In these polymers, the sequence of the chromophore units along the main chain is rigorously head to tail. All the polyesters are processable, both in the melt and in solution. For one polyester, a full second‐order NLO characterization has been performed. An out‐of‐resonance d₃₃ coefficient of 21 pm/V at 1368 nm has been measured. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2719–2725, 2007     

Kinetic C<Subscript>(2)-H</Subscript> exchange study of<Emphasis Type="Italic">Cis</Emphasis>-[(en)<Subscript>2</Subscript>Co(HIm)(enH)]Br<Subscript>4</Subscript> by NMR spectroscopy: Evidence for the acidity of C<Subscript>(2)-H</Subscript> proton

C_(2)-H exchange incis-[(en)₂Co(HIm)(enH)]Br₄ (Im, imidazole; en, ethylenediamine) was studied over a pD range of 9.4 to 10.2 at 60°C where thecis-[(en)₂Co(Him)(enH)]⁴⁺ andcis-[(en)₂Co(HIm)(en)]³⁺ are the species present in significant concentrations.Cis-[(en)₂Co(HIm)(enH)]⁴⁺ has pK_a1 7.86 and pK_a2 9.82 with pK_a1 corresponding to coordinated enH ionization and pK_a2 to ImH ionization. The kinetic data may be interpreted in terms of an intramolecular H-D exchange mechanism, where the “dangling”-ND₂CH₂CH₂ND₂ group acts as a base to remove the imidazole C_(2)-H proton from the coordinated DIm moiety.     

<Superscript>6</Superscript>He + <Superscript>6</Superscript>He Clustering of <Superscript>12</Superscript>Be in a Microscopic Algebraic Approach

The norm kernel of the A=12 system composed of two ⁶He clusters, and the L=0 basis functions (in the SU(3) and angular momentum-coupled schemes) are analytically obtained in the Fock-Bargmann space. The norm kernel has a diagonal form in the former basis, but the asymptotic conditions are naturally defined in the latter one. The system is a good illustration for the method of projection of the norm kernel to the basis functions in the presence of SU(3) degeneracy that was proposed by the authors. The coupled-channel problem is considered in the algebraic version of the resonating-group method, with the multiple decay thresholds being properly accounted for. The structure of the ground state of ¹²Be obtained in the approximation of zero-range nuclear force is compared with the shell-model predictions. In the continuum part of the spectrum, the S-matrix is constructed, the asymptotic normalization coefficients are deduced and their energy dependence is analyzed.     

Degradative chain transfer in vinyl acetate polymerizations using toluene as solvent

In this work, we propose that retardation in vinyl acetate polymerization rate in the presence of toluene is due to degradative chain transfer. The transfer constant to toluene (C_trs) determined using the Mayo method is equal to 3.8 × 10^?3, which is remarkably similar to the value calculated from the rate data, assuming degradative chain transfer (2.7 × 10^?3). Simulations, including chain‐length‐dependent termination, were carried out to compare our degradative chain transfer model with experimental results. The conversion–time profiles showed excellent agreement between experiment and simulation. Good agreement was found for the M_n data as a function of conversion. The experimental and simulation data strongly support the postulate that degradative chain transfer is the dominant kinetic mechanism. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3620–3625, 2007     

Poly(L‐lysine) and clay nanocomposite with desired matrix secondary structure: Effects of polypeptide molecular weight

Nanocomposites (NC) were formed using cationic poly(L ‐lysine) (PLL), a semicrystalline polypeptide, that was reinforced by sodium montmorillonite (MMT) clay via solution intercalation technique. By varying solution conditions such as pH, temperature, and polypeptide concentration in the presence of clay platelets, the secondary structure of PLL was controllably altered into α‐helical, β‐sheet, and random coil. The high molecular weight polypeptide shows a strong propensity to fold into the β‐sheet structure when cast as films, irrespective of the initial secondary structure in solution. Nanocomposite local morphology confirms intercalated MMT platelets with PLL over a wide range of compositions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 239–252, 2007.     

On a Modification of the Scintillation Method

We solve the problem of diffraction of fluctuating radiation by an optically thin irregular layer (phase screen) with developed turbulent structure. It is shown that in the case of diffraction of radiation with saturated fluctuations and a narrow-band frequency spectrum by a weakly turbulent moving phase screen, the measured frequency spectrum of intensity fluctuations in the observation plane allows one to obtain information on the form of the spectrum of irregularities of an optically thin irregular layer in a wide size range significantly exceeding the size of the first Fresnel zone. Similarly to the well-known phase method of diagnostics of randomly irregular media, the conventional scintillation method modified in such a way yields undistorted information on the form of the irregularity spectrum. However, in contrast to the phase method, it also allows one to obtain data on the drift velocity of irregularities in the studied irregular layer.     

Amorphous chalcogenide AgSbS2 films prepared by pulsed laser deposition

The pulsed laser deposition technique has been applied to prepare amorphous ternary AgSbS films. The films were prepared from AgSbS₂ bulk glass using a KrF excimer laser. The composition of prepared films according to the results of the energy dispersive X-ray analysis and the Rutherford backscattering was close to bulk one. Optical transmission and spectral dependence of the refractive index proved the good optical quality of the films. The Ar⁺ ion laser dot exposures of the films show a potential applicability of the films as a new type of optical recording material. PACS 78.66.Jg; 81.15.Fg; 81.40.Wx     

Polarization locking and nonparaxial spatial solitons in media with electronic Kerr nonlinearity

The polarization structure of nonparaxial spatial solitons in a transparent medium with the electronic mechanism of Kerr nonlinearity is studied theoretically. It is demonstrated analytically in the weak nonparaxiality approximation that the regime of polarization locking, in which all the field components have the same propagation constant, is the only stable regime. Estimates of the rate of transition of the initial metastable regime of rotation of the polarization ellipse to the regime of polarization locking are presented. Based on a numerical solution of the nonlinear Maxwell equations, the presence of the nonparaxial regime of polarization locking is confirmed and the main characteristics of the corresponding spatial solitons are obtained.