Preparation and characterization of nanocomposites in system as: SnO<Subscript>2</Subscript>–xTiO<Subscript>2</Subscript> (where <Emphasis Type="Italic">x</Emphasis> = 25, 50 and 75 mol%)

Nanocomposite samples containing various molar compositions of tin and titanium oxides were synthesized by a sol–gel method using octadecylamine as controlling template agent. The structural and the crystalline features of the samples were investigated with Fourier Transformer Infra-red, X-ray diffraction, Transmission electron microscope (TEM) where the surface area was estimated by BET analysis. The crystalline parameters and the particle size were estimated by Rietveld quantitative phase analysis. It is interesting to mention that a reduction in the lattice parameters was detected upon introduction of various molar compositions of titanium oxide revealing that a part of titania is incorporated into the SnO₂ lattice forming Ti_1−xSn_xO₂ solid solution. The quantitative analysis claims that part of titanium oxide is incorporated substitutionally in the crystal lattice of SnO₂, forming a solid solution and other parts are either segregated as separate rutile titania phase or dispersed as amorphous phase on the grain boundary of SnO₂. The results show a remarkable reduction in particle size from 42 to 5 nm and increasing in the specific surface area up to 176 m²/g upon introduction of various content of titania implying the role of titania particles in preventing SnO₂ crystallites from further growing up during the progress of calcination. TEM images show that pure tin oxide particles arranged in large aggregation in wormhole like structure, while the existence of titanium oxide are successfully creates spherical nanoparticles system organized in a definite structure. The optical absorbance spectra indicate a red shift and band gap narrowing upon introduction of titania which increase with increasing in titania contents.     

Mercury removal from aqueous solution by adsorption on?activated carbons prepared from olive stones

The textural characterization of a series of activated carbons prepared from olive stones, by carbonization at different temperatures (400, 550, 700 and 850 °C) and thermal activation with CO₂, has been investigated using N₂ adsorption at −196 °C and CO₂ adsorption at 0 °C. The effect of pre-oxidation of the carbonized precursor has also been studied, using temperature-programmed decomposition (TPD), to evaluate the effect of oxygen content of the chars in the performance of the obtained activated carbons for mercury removal. The adsorption of Hg(II) cations from aqueous solutions at room temperature by the prepared activated carbons was studied. Experimental results show that all samples exhibit a large microporosity (pore diameter below 0.56 nm). The amount of surface oxygen groups increased after pre-oxidation treatment, this enhancing the Hg(II) uptake (up to 72%). It can be concluded that these groups make the support more hydrophilic, thus providing a more efficient adsorption of Hg(II). The formation of a great amount of surface oxide groups such as carboxyl, phenol and lactone alters the surface charge properties of the carbon, this enhancing the surface-Hg(II) interaction.     

A revisit to the Gibbs dividing surfaces and helium adsorption

This paper addresses the long-standing problem of the so-called Gibbs dividing surface and the use of helium as a “non-adsorbing” gas for the determination of the “helium”-void volume and thence the Gibbs excess. Using helium is subject to some uncertainty because helium does adsorb (to call it a non-adsorbing gas is misleading) and it is able to access pore spaces that other larger adsorbates cannot. On the other hand, even helium atoms can not physically probe all the space described by the helium-void volume. To avoid these difficulties, we suggest an alternative to the formulation of the Gibbs dividing surface and the definition of the excess amount. We illustrate this with the two common tools to study adsorption—the volumetric and gravimetric techniques, and justify our new analysis with a computer simulation of a number of model adsorption systems. Furthermore, we also show that by using the correct accessible volume and inaccessible volume the excess amount obtained from a volumetric experiment is exactly the same as that obtained from a gravimetric experiment.     

Selective solid phase extraction of platinum on an ion imprinted polymers for its electrothermal atomic absorption spectrometric determination in environmental samples

An ion-imprinted polymer (IIP) was obtained by copolymerization of methacrylic acid (as a functional monomer) and ethylene glycol dimethacrylate (as a crosslinking agent) in the presence of various chelators for Pt(II) ion and using 2,2??-azo-bis-isobutyronitrile as the initiator. Specifically, acetaldehyde thiosemicarbazone (AcTSn) and benzaldehyde thiosemicarbazone (BnTSn) were used as chelators. The IIPs were applied as sorbents for solid-phase extraction of Pt(II) and Pt(IV) ions from aqueous solutions. The effects of acidity and flow rate of the sample, of elution conditions and of potentially interfering ions were investigated. The imprinting effect of analyte is clearly demonstrated by the fact that only the IIP is capable of quantitative retention of Pt(II) and Pt(IV) ions. The method works best in the pH range from 0.5 to 1 and from 3.5 to 9.5. The ions can be recovered with an acidic solution of thiourea. The Pt-AcTSn polymer displays better sorption properties for the separation of analytes. The selectivity coefficients of the Pt-AcTSn and control polymers for Pt(IV) in the presence Pd(II), Rh(III), Ru(III), Al(III) and Cu(II) were calculated, and the sorbent capacity for Pt(IV) was found to be 4.56???g?g?^-1. The method was successfully applied to the determination of Pt(IV) by electrothermal atomic absorption spectrometry in tap water, tunnel dust and anode slime samples.

Multiresidue determination of 160 pesticides in wines employing mixed-mode dispersive-solid phase extraction and gas chromatography-tandem mass spectrometry

A new multiresidue method for the efficient screening, identification and quantification of over 160 pesticides belonging to different chemical classes in red, rose and white wines have been developed. The analysis was based on gas chromatographic-tandem quadrupole mass spectrometric determination (GC-QqQ-MS/MS). An optimization strategy involved the selection of buffering conditions and sorbents for dispersive-solid phase extraction (dispersive-SPE) in order to achieve acceptably high recoveries and reduce co-extractives in the final extracts. As a result, the optimized procedure allowed us to obtain consistent recoveries of the target pesticides including problematic ones such as captan, chlorothalonil, dichlofluanid, folpet and tolylfluanid. The attained recoveries were typically between 80 and 110% (89% on average) with RSD values typically lower than 10% (8% on average) at three spiking levels of 0.01, 0.05 and 0.2 mg kg⁻¹. Linearity was studied in the range between 0.005 and 0.2 mg kg⁻¹ using pesticide standards prepared both in pure solvent and in the presence of matrix, showing coefficients of determination (R²) higher than 0.99 for all the pesticides except for desmedipham, thiabendazole and thiamethoxam in pure solvent. The study of the ratio of the slopes obtained in solvent and in matrix provided information about the matrix effects, which was <10%, 10-20% and >20% for 33, 36 and 31% of the studied pesticides, respectively. To improve accuracy, matrix matched standards were always used for calculation of the quantification results. The expanded uncertainties were estimated by using a “top-down” approach as being 17% on average (coverage factor k = 2, confidence level 95%). Finally, the method was used with success to detect and quantify pesticide residues in commercial wines.     

Synthesis and antimicrobial studies of bis(O,O′‐dialkyl and alkylene dithiophosphoric acid) adducts of diphenyl diselenide

Dialkyl and alkylene dithiophoshoric acids react with diphenyl diselenide in a 1:2 molar ratio in refluxing benzene to yield Ph₂Se₂·2HS₂P(OR)₂ (R = Et, Pr‐n, Pr‐i, Bu‐i and Ph) and , where G = ‐CH₂CMe₂CH₂‐, ‐CH₂CEt₂CH₂‐ and ‐CMe₂CMe₂‐. The complexes are yellow solids (in the cyclic chain) and yellow sticky solids (in the open chain), are soluble in common organic solvents and are monomeric in nature. They were characterized on the basis of elemental analyses, molecular weight determinations, IR and NMR (¹H, ¹³C and ³¹P). The spectral data revealed addition of dithiophosphate moieties to the diselenide. Studies were conducted to assess the growth‐inhibiting potential of some of the synthesized complexes against various bacterial strains. Copyright © 2011 John Wiley & Sons, Ltd.     

Towards new molecular photocatalysts for CO2 reduction: photo-induced electron transfer versus CO dissociation within [Os(NN)(CO)2Cl2] Complexes

Optical excitation in the visible region of trans-(Cl)-[Os(bpy)(CO)(2)Cl(2)] (bpy=2,2'-bipyridine; C1) and trans-(Cl)-[Os(dmbpy)(CO)(2)Cl(2)] (dmbpy=4,4'-dimethyl 2,2'-bipyridine; C2) is known to induce the common CO dissociation reaction. However, the quantum yield of the reactions is less than 0.15, although C1 and C2 display pronounced photoluminescence in the visible region at room temperature with a lifetime of few tens of nanoseconds. Taking into account the characteristics of their emitting state, we have investigated the capability of C1 and C2 to act as a photosensitiser in redox reactions in different solvents (MeCN, PrCN and DMF). The efficient oxidation and reduction of both complexes under continuous irradiation in the presence of a sacrificial electron acceptor or donor is reported here. The photo-induced transformations and the nature of the resulting compounds were analysed by UV/Vis and IR spectroscopies and cyclic voltammetry. Photo-induced oxidation of C1 and C2 leads to the corresponding monocarbonyl oxidised species, whereas photo-induced reduction under argon leads mainly to the formation of the corresponding Os-bonded molecular wires P1 and P2 after exchange of two electrons associated with the loss of two chloro ligands. The chemical yield of the latter reaction (around 65%) becomes quantitative by adding [Ru(bpy)(3)](2+) as an external redox photosensitiser. This behaviour has been used to photocatalyse the two electron, two proton conversion of CO(2) to CO. Turnover numbers (TON) of 11.5 and 19.5 have been obtained respectively for C1 and C2 after 4.5 h of irradiation under CO(2) in DMF with triethanolamine as the electron donor. TON can be slightly increased by adding [Ru(bpy)(3)](2+) to the solution.     

Violet-to-blue tunable emission of aryl-substituted dispirofluorene-indenofluorene isomers by conformationally-controllable intramolecular excimer formation

Two series of DiSpiroFluorene-IndenoFluorene (DSF-IF) positional isomers, namely dispiro[2,7-diarylfluorene-9',6,9',12-indeno[1,2-b]fluorenes], (1,2-b)-DSF-IFs 1 and dispiro[2,7-diarylfluorene-9',6,9',12-indeno[2,1-a]fluorenes], (2,1-a)-DSF-IFs 2 have been synthesized. These violet-to-blue fluorescent emitters possess a 3π-2spiro architecture, which combines via two spiro links two different indenofluorene cores, that is, (1,2-b)-IF or (2,1-a)-IF and 2,7-substituted-diaryl-fluorene units. Due to their different geometric profiles, the two families of positional isomers present drastically different properties. The marked difference observed between the properties of (1,2-b)-DSF-IF (1) and (2,1-a)-DSF-IF (2) is discussed in terms of intramolecular π-π interactions occurring in (2,1-a)-DSF-IF (2) leading to conformationally-controllable intramolecular excimer formation. Indeed, the original geometry of the (2,1-a)-DSF-IF (2) family, with face-to-face "aryl-fluorene-aryl" moieties, leads to remarkable excimer emission through intramolecular π-π interactions in the excited state. Furthermore, the emission wavelengths can be gradually modulated by the control of the steric hindrance between the adjacent substituted phenyl rings. Thus, through a comparative and detailed study of the (1)H NMR, electrochemical and photophysical properties of DSF-IFs 1 and 2, we have evidenced the intramolecular π-π interactions occurring between the two "aryl-fluorene-aryl" moieties in the ground state and in the excited state. These properties have been finally correlated to the spectacular conformational change modeled by density functional theory (DFT) calculations. Indeed, the two "aryl-fluorene-aryl" moieties switch from a staggered conformation in the ground state to an eclipsed conformation in the first excited state.     

Hydrogen isotope type-curves of very hot crude oils

Several crude oil accumulations in the Pannonian Basin are trapped in uncommonly hot (>170°C) reservoirs. Their maturities range from mature to very mature on the basis of cracking parameters of their biological marker homologous series (ratio of products to reactants). A stable carbon isotopic study of these oils, poor in biological markers commonly used for correlation purposes, did not provide a reliable oil-to-oil correlation. As an alternative tool, the hydrogen isotope compositions of oil fractions separated on the basis of different polarities were measured, and hydrogen isotope type-curves were generated for a set of mature to very mature crude oil samples. This method of presenting hydrogen isotope composition of fractions as type-curves is novel. Nineteen samples (17 crude oils from SE-Hungary, 1 oil condensate and 1 artificial oil) were chosen for the present study. The aim was to examine the applicability of hydrogen isotope type-curves in oil-to-oil correlation and to test the simultaneous application of carbon and hydrogen isotope type-curves in the field of petroleum geochemistry. We have shown that, although the conventionally used co-variation plots proved to be inadequate for the correlation of these hot and mature oils, the simultaneous use of carbon and the newly introduced hydrogen isotope type-curves allows us to group and distinguish oils of different origins.     

Acetylation of cellulose in LiCl-<Emphasis Type="Italic">N,N</Emphasis>-dimethylacetamide: first report on the correlation between the reaction efficiency and the aggregation number of dissolved cellulose

The acylation of three cellulose samples by acetic anhydride, Ac₂O, in the solvent system LiCl/N,N-dimethylacetamide, DMAc (4 h, 110 °C), has been revisited in order to investigate the dependence of the reaction efficiency on the structural characteristics of cellulose, and its aggregation in solution. The cellulose samples employed included microcrystalline, MCC; mercerized cotton linters, M-cotton, and mercerized sisal, M-sisal. The reaction efficiency expresses the relationship between the degree of substitution, DS, of the ester obtained, and the molar ratio Ac₂O/AGU (anhydroglucose unit of the biopolymer); 100% efficiency means obtaining DS = 3 at Ac₂O/AGU = 3. For all celluloses, the dependence of DS on Ac₂O/AGU is described by an exponential decay equation: DS = DS_o − Ae^{−[(Ac2O/AGU)/B]}; (A) and (B) are regression coefficients, and DS_o is the calculated maximum degree of substitution, achieved under the conditions of each experiment. Values of (B) are clearly dependent on the cellulose employed: B_(M-cotton) > B_(M-sisal) > B_(MCC); they correlate qualitatively with the degree of polymerization of cellulose, and linearly with the aggregation number, N_agg, of the dissolved biopolymer, as calculated from static light scattering measurements: (B) = 1.709 + 0.034 N_agg. To our knowledge, this is the first report on the latter correlation; it shows the importance of the physical state of dissolved cellulose, and serves to explain, in part, the need to use distinct reaction conditions for MCC and fibrous celluloses, in particular Ac₂O/AGU, time, temperature.