Super-hydrophobic, highly adhesive, polydimethylsiloxane (PDMS) surfaces

Super-hydrophobic surfaces have been fabricated by casting polydimethylsiloxane (PDMS) on a textured substrate of known surface topography, and were characterized using contact angle, atomic force microscopy, surface free energy calculations, and adhesion measurements. The resulting PDMS has a micro-textured surface with a static contact angle of 153.5° and a hysteresis of 27° when using de-ionized water. Unlike many super-hydrophobic materials, the textured PDMS is highly adhesive, allowing water drops as large as 25.0 μL to be inverted. This high adhesion, super-hydrophobic behavior is an illustration of the "petal effect". This rapid, reproducible technique has promising applications in transport and analysis of microvolume samples.     

Synthesis and characterisation of sterically stabilised polypyrrole particles using a chemically reactive poly(vinyl amine)-based stabiliser

Poly(vinyl amine) (PVAm) was derivatised using 2-thiophenecarboxaldehyde via Michael addition to prepare a statistical copolymer stabiliser for the synthesis of primary amine-functionalised polypyrrole (PPy) particles. A minimum stabiliser concentration of around 20 % (w/v) relative to pyrrole was required for well-defined PPy particles of approximately 100–200 nm, as judged by transmission electron microscopy (TEM) and dynamic light scattering (DLS). FTIR spectroscopy confirmed that stabiliser grafting had occurred, while x-ray photoelectron spectroscopy (XPS) studies indicated a stabiliser surface coverage on the PPy particles of around 53 %. PPy particles prepared at stabiliser concentrations below 20 % (w/v) were not colloidally stable above pH 6. However, higher stabiliser concentrations (e.g., 50 % (w/v) based on pyrrole) led to a significant improvement, with colloidal stability being retained above pH 7. Long-term colloidal stability studies of PPy particles stored at pH 7.5 confirmed that the amine-based stabiliser produced more stable aqueous dispersions than the imine-based stabiliser, since the latter bond is hydrolytically unstable.     

Identification and Preliminary Structure-Activity Relationship Studies of 1,5-Dihydrobenzo[e][1,4]oxazepin-2(3H)-ones That Induce Differentiation of Acute Myeloid Leukemia Cells In Vitro

Acute myeloid leukemia (AML) is the most aggressive type of blood cancer, and there is a continued need for new treatments that are well tolerated and improve long-term survival rates in patients. Induction of differentiation has emerged as a promising alternative to conventional cytotoxic chemotherapy, but known agents lack efficacy in genetically distinct patient populations. Previously, we established a phenotypic screen to identify small molecules that could stimulate differentiation in a range of AML cell lines. Utilising this strategy, a 1,5-dihydrobenzo[e][1,4]oxazepin-2(3H)-one hit compound was identified. Herein, we report the hit validation in vitro, structure-activity relationship (SAR) studies and the pharmacokinetic profiles for selected compounds.     

Synthesis and isomerization of thienotriazolopyrimidine and thienotetrazolopyrimidine derivatives with potential anti‐inflammatory activity

Several derivatives containing the thieno[2,3‐d]pyrimidine system were prepared starting from 2‐amino‐4,5‐dihydronaphtho[2,1‐b]thiophene‐1‐carbonitrile ( 1 ). In particular, the synthesis and structure characterization of 8,9‐dihydronaphtho‐ [1′,2′:4,5]thieno[3,2‐e][1,2,4]triazolo[4,3‐c]pyrimidine derivatives 13–16 and their isomerization to 8,9‐dihydronaphtho[1′,2′:4,5]thieno[3,2‐e][1,2,4]‐triazolo[1,5‐c]pyrimidine derivatives 17–20 under different suitable reaction conditions were reported and verified with X‐ray analysis. Moreover, compounds 13, 14 and 22 were tested as potential anti‐inflammatory agents and derivative 14 showed potent activity in carrageenan test. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:226–234, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20114     

Deoxyribozyme-based ligase logic gates and their initial circuits

A complete set (YES, NOT, AND, and ANDNOT) of molecular scale logic gates based on ligase deoxyribozymes was constructed. The activity of these gates was visualized through the formation of cascades with downstream phosphodieseterase YES gates, which performed fluorogenic cleavage.     

Analysis of Biological Samples Using Paper Spray Mass Spectrometry: An Investigation of Impacts by the Substrates, Solvents and Elution Methods

Paper spray has been developed as a fast sampling ionization method for direct analysis of raw biological and chemical samples using mass spectrometry (MS). Quantitation of therapeutic drugs in blood samples at high accuracy has also been achieved using paper spray MS without traditional sample preparation or chromatographic separation. The paper spray ionization is a process integrated with a fast extraction of the analyte from the raw sample by a solvent, the transport of the extracted analytes on the paper, and a spray ionization at the tip of the paper substrate with a high voltage applied. In this study, the influence on the analytical performance by the solvent–substrate systems and the selection of the elution methods was investigated. The protein hemoglobin could be observed from fresh blood samples on silanized paper or from dried blood spots on silica-coated paper. The on-paper separation of the chemicals during the paper spray was characterized through the analysis of a mixture of the methyl violet 2B and methylene blue. The mode of applying the spray solvent was found to have a significant impact on the separation. The results in this study led to a better understanding of the analyte elution, on-paper separation, as well as the ionization processes of the paper spray. This study also helps in establishing a guideline for optimizing the analytical performance of paper spray for direct analysis of target analytes using mass spectrometry.     

Palladium‐Catalyzed Construction of Quaternary Stereocenters by Enantioselective Arylation of γ‐Lactams with Aryl Chlorides and Bromides

Herein, we report the first Pd‐catalyzed enantioselective arylation of α‐substituted γ‐lactams. Two sets of conditions were developed for this transformation, allowing for the use of either aryl chlorides or bromides as electrophiles. Utilizing a highly electron‐rich dialkylphosphine ligand we have been able to construct α‐quaternary centers in good yields (up to 91 % yield) and high enantioselectivities (up to 97 % ee).     

Contribution of LHC II complex to the electric properties of thylakoid membranes: an electric light scattering study of Chl b-less barley mutant

Electric light scattering measurements demonstrate a strong decline in the permanent electric dipole moment and electric polarizability of both thylakoid membranes and photosystem II-enriched particles of the Chlorina f2 mutant which has severely reduced levels of light-harvesting chlorophyll a/b-binding proteins compared to the wild type barley chloroplasts. The shift in the electric polarizability relaxation to higher frequencies in thylakoids and photosystem II particles from Chlorina f2 reflects higher mobility of the interfacial charges of the mutant than that of the wild type membranes. The experimental data strongly suggest that the major light-harvesting complex of photosystem II directly contribute to the electric properties of thylakoid membranes.     

HOECHST 33258 DYE GENERATES DNA-PROTEIN CROSS-LINKS DURING ULTRAVIOLET LIGHT-INDUCED PHOTOLYSIS OF BROMODEOXYURIDINE IN REPLICATED AND REPAIRED DNA

Abstract— Substitution of bromodeoxyuridine for thymidine in the DNA of mammalian cells sensitizes them to a range of wavelengths of ultraviolet light. Cells are also sensitized to photochemical reactions involving dyes such as Hoechst 33258, which is used to produce differential staining of chromatids according to their bromodeoxyuridine content. Irradiation with 313 nm light of human and hamster cells containing bromodeoxyuridine in their DNA produced single-strand breaks, detectable by alkaline elution, but no DNA-protein cross-links. Irradiation with 360 nm light in the presence of Hoechst 33258 produced extensive DNA-protein cross-linkage as well as single-strand breaks. These cross-links were observed in DNA containing bromodeoxyuridine incorporated by either semiconservative or repair replication, and may provide a method for identification of proteins in close proximity to replication forks or repair sites. When the protein was removed with proteinase K, bromodeoxyuridine in repair patches after irradiation by doses of ultraviolet (254 nm) light as low as 0.26 J/m² could readily be detected. Hoechst 33258-mediated photolysis, therefore, provides a sensitive new technique for measuring repair replication after ultraviolet light irradiation.     

A study of PBT/PC blends by modulated DSC and conventional DSC

Two poly(butylene terephthalate)/polycarbonate (PBT/PC) blends with different formulations were analyzed by modulated DSC (MDSC) and conventional DSC to determine differences in crystallization behavior. A significant difference (30°C in cold crystallization temperature) between the two samples was detectable by MDSC while no significant difference was seen by conventional DSC. That indicatesthe total heat flow from MDSC is not always equivalent to the heat flow from conventional DSC as we have assumed or seen before. The reason has not been fully understood, but may be related to unusual nucleation and crystallization induced by modulation. Alternative conventional DSC methods were developed and compared to the MDSC results.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe authors like to thank Drs. Bernhard Wunderlich and Robert Gallucci for helpful discussion, David Shaker and Mary Parsonage for some DSC experiments. Technical support from TA Instruments is also greatly appreciated.