MIR and NIR spectroscopy of sol–gel hydrotalcites with various trivalent cations

Three different hydrotalcites were synthesized from magnesium ethoxide, and aluminium, gallium and indium acetylacetonate, using the sol–gel technique. The colloid suspensions initially obtained were gelled and separated by centrifugation. XRD diffraction patterns confirmed that all solids thus obtained possessed a hydrotalcite structure. The resulting hydrotalcites were characterized by mid-infrared (MIR) and near-infrared (NIR) spectroscopies. The two types of spectra were found not to depend on the synthetic medium or trivalent metal used and were thus quite similar. The MIR spectra for the three solids included a strong band at 3500–3000 cm⁻¹ due to stretching vibrations of the different types of O–H groups in them. The signal at about 1370 cm⁻¹ observed for all solids indicates that the sole interlayer anion present was carbonate. The NIR spectra exhibited the bands for the first and second overtone of the O–H stretching vibration in addition to various combination bands.     

Synthesis and molecular structure of the dihydrobis(thioxotriazolinyl)borato complexes of zinc(II), bismuth(III), and nickel(II). M...H-B interaction studied by Ab initio calculations

Reacting the heterocycle 5-thioxo-1,4-dihydro-4-ethyl-3-methyl-1,2,4-triazole (thioxotriazoline) with sodium tetrahydroborate in the molar ratio of approximately 2:1 at 130 degrees C provides the new ligand dihydrobis(thioxotriazolinyl)borato, [Bt(Et,Me)](-), as its sodium salt. The neutral complexes of this anionic ligand with zinc(II), bismuth(III), and nickel(II) have been synthesized and characterized by X-ray crystallography. In every complex, the ligand is coordinated to the metal in the S(2) mode, generating eight-membered chelate rings. The bismuth and nickel complexes exhibit two M.H-B interactions responsible for the dodecahedral and octahedral geometries, respectively. For the zinc complex, the trigonal-bipyramidal coordination is achieved with an apical Zn.H-B interaction. The crystal structures for the three complexes are described, and ab initio calculations on Bi(III), Ni(II), and Zn(II) compounds have been performed in order to assess the nature of the M.H-B interaction and its role for the definition of the molecular geometries.     

Electrochemical processes in electrospray ionization mass spectrometry

Editorial Comment Last month we presented, as a Special Feature, a set of five articles that constituted a Commentary on the fundamentals and mechanism of electrospray ionization (ESI). These articles produced some lively discussion among the authors on the role of electrochemistry in ESI. Six authors participated in a detailed exchange of views on this topic, the final results of which constitute this month's Special Feature. We particularly hope that younger scientists will find value in this month's Special Feature, not only for the science that it teaches but also what it reveals about the processes by which scientific conclusions are drawn. To a degree, the contributions part the curtains on these processes and show science in action. We sincerely thank the contributors to this discussion. The give and take of intellectual debate is not always easy, and to a remarkable extent this set of authors has maintained good humor and friendships, even when disagreeing strongly on substance. Graham Cooks and Richard Caprioli Copyright 2000 John Wiley & Sons, Ltd.     

Long‐term thermal stability of fluorescent dye used for chiral amino acid analysis on future spaceflight missions

Future spaceflight missions focused on life detection will carry with them new, state‐of‐the‐art instrumentation capable of highly selective and sensitive organic analysis. CE–LIF is an ideal candidate for such a mission due to its high separation efficiency and low LODs. One perceived risk of utilizing this technique on a future mission is the stability of the chemical reagents in the spaceflight environment. Here, we present an investigation of the thermal stability of the fluorescent dye (5‐carboxyfluorescein succinimidyl ester) used for amino acid analysis. The dye was stored at 4, 25, and 60°C for 1 month, 6 months, 1 year, and 2 years. When stored at 4°C for 2 years, 25°C for 6 months, or 60°C for 1 month there was no effect on CE‐LIF assay performance due to dye degradation. Beyond these time points, while the dye degradation begins to interfere with the analysis, it is still possible to perform the analysis and achieve the majority of amino acid biosignature science goals described in the science definition team report for the potential Europa Lander mission. This work indicates that thermal control of the dye at ≤4°C will be needed during transit on future spaceflight missions to maintain dye stability.     

Theoretical calculations on the mechanisms of the gas‐phase elimination kinetics of 2‐chloro‐1‐phenylethane, 3‐chloro‐1‐phenylpropane, 4‐chloro‐1‐phenylbutane, 5‐chloro‐1‐phenylpentane,and their corresponding chloroalkanes: The effect of the phenyl ring

The kinetics and mechanisms of the dehydrochlorination of 2‐chloro‐1‐ phenylethane, 3‐chloro‐1‐phenylpropane, 4‐chloro‐1‐phenylbutane, 5‐chloro‐1‐phenylpentane, and their corresponding chloroalkanes were examined by means of electronic structure calculation using density functional theory methods B3LYP/6–31G(d,p), B3LYP/6–31++G(d,p), MPW1PW91/6–31G(d,p), MPW1PW91/6–31++G(d,p), PBEPBE/6–31G(d,p), and PBEPBE/6–31++G(d,p). The potential energy surface was investigated for the minimum energy path. Calculated enthalpies and energies of activation are in good agreement with experimental values using the MPW1PW91 and B3LYP methods. The transition state of these reactions is a four‐centered cyclic structure. The reported experimental results proposing neighboring group participation by the phenyl group was not supported by theoretical calculations. The rate‐determining process in these reactions is the breaking of Cl? C bond. The reactions are described as concerted moderately polar and nonsynchronous. © 2011 Wiley Peiodicals, Inc. Int J Chem Kinet 43: 292–302, 2011     

Alternative Route for the Synthesis of 6‐Methoxy‐5‐methyl‐α‐tetralone and 6‐Methoxy‐2,5‐dimethyl‐α‐tetralone

The ketoesters 3 and 4, obtained by the condensation of 2‐cyclohexanone carboxylate and 1‐chloro‐3‐pentanone, were heated with 2,3‐dichloro‐5,6‐dicyanobenzoquinone (DDQ) to yield the dienones 5 and 6, which on hydrolysis with potassium t‐butoxide and dimethyl sulfoxide afforded tetralin 8. These were converted to tetralone 10 by methylation and oxidation respectively. Further methylation of 10 yielded tetralone 11.     

Anisotropic optical functions of α-1,4,4-tetraphenyl-1,3-butadiene

One of the known monoclinic polymorphs of 1,1,4,4-tetraphenyl-1,3-butadiene was grown by the floating-drop technique. This material is of interest for blue emitting devices and for fundamental studies on intermolecular interactions, excited states and vibronic coupling in the fields of chemical physics and materials science. Polarized UV-visible spectra are reported. The origin of the optical bands is resolved. The results give information on the intermolecular interactions and are compared with theoretical predictions and modeling. The full material dielectric tensor is provided, as deduced from generalized spectroscopic ellipsometry. Details on the use of this technique on strongly anisotropic and absorbing molecular materials are given. Some typical features of the optical spectra are also demonstrated to be very sensitive to the presence of misaligned domains, which, in our samples, are found to be rotated around the normal to the surface and whose amount is determined. The method allows discriminating among monocrystals, in-plane polycrystalline samples, layered samples formed by misaligned successive layers, or samples with both types of disorder. Two independent parameters giving the fraction of misaligned domains or layers are suggested for the characterization and optimization of the growth and deposition of molecular organic materials.     

Benzothiazole‐Based Neutral Ratiometric Fluorescence Sensor for Amyloid Fibrils

Early detection of amyloid fibrils is very important for the timely diagnosis of several neurological diseases. Thioflavin‐T (ThT) is a gold standard fluorescent probe for amyloid fibrils and has been used for the last few decades. However, due to its positive charge, ThT is incapable of crossing the blood–brain barrier and cannot be used for in vivo imaging of fibrils. In the present work, we synthesized a neutral ThT derivative, 2‐[2’‐Me,4’‐(dimethylamino)phenyl]benzothiazole (2Me‐DABT), which showed a strong affinity towards the amyloid fibrils. On association with the amyloid fibrils, 2Me‐DABT not only showed a large increase in its emission intensity, but also, unlike ThT, a large blueshift in its emission spectrum was observed. Thus, unlike ThT, 2Me‐DABT is a potential candidate for the ratiometric sensor of the amyloid fibrils. Detailed photophysical properties of 2Me‐DABT in amyloid fibrils and different solvent media were studied to understand its sensory activity. Fluorescence resonance energy transfer (FRET) studies suggested that the sites of localization for ThT and 2Me‐DABT in amyloid fibrils are not same and their average distance of separation in amyloid fibrils was determined. The experimental data was nicely supported by molecular docking studies, which confirmed the binding of 2Me‐DABT in the inner core of the amyloid fibrils.