Ab initio Valence Bond Study on AB-type Molecules,A Description for XH(X=L,Be,B,C,N,O,F) and XF(X=Li,Be,B)

Ab initio valence bond method is employed to quantitatively study the concepts of ionic resonance energy and ionicity of a chemical bond in the cases of hydrides XH(X=Li,Be,B,C,N,O,F) and fluorides XF(X=Li,Be,B),By establishing the relationship between resonance and stability,and comparing the calculated ionicities with Pauling‘s earlier estimations in the above diatomic molecules,the merits of Pauling‘s classical resonance theory were demonstrated at the ab initio level.     

Selective synthesis and characterization of single-crystal silver molybdate/tungstate nanowires by a hydrothermal process

Selective synthesis of uniform single crystalline silver molybdate/tungstate nanorods/nanowires in large scale can be easily realized by a facile hydrothermal recrystallization technique. The synthesis is strongly dependent on the pH conditions, temperature, and reaction time. The phase transformation was examined in details. Pure Ag(2)MoO(4) and Ag(6)Mo(10)O(33) can be easily obtained under neutral condition and pH 2, respectively, whereas other mixed phases of Mo(17)O(47), Ag(2)Mo(2)O(7,) Ag(6)Mo(10)O(33) were observed under different pH conditions. Ag(6)Mo(10)O(33) nanowires with uniform diameter 50-60 nm and length up to several hundred micrometers were synthesized in large scale for the first time at 140 degrees C. The melting point of Ag(6)Mo(10)O(33) nanowires were found to be about 238 degrees C. Similarly, Ag(2)WO(4), and Ag(2)W(2)O(7) nanorods/nanowires can be selectively synthesized by controlling pH value. The results demonstrated that this route could be a potential mild way to selectively synthesize various molybdate nanowires with various phases in large scale.     

Electron scattering on C6F6 and SF6 molecules

Total absolute cross sections for electron scattering on hexafluorobenzene, C₆F₆, and sulfur hexafluoride, SF₆, molecules, have been measured as a function of impact energy from 0.6 to 250 eV. The total cross section for C₆F₆ exhibits a very broad peak stretching from 10 to 100 eV with some weak features near 9.5 and 15 eV superimposed on the peak. Apart from the well-known low-energy resonant structures in the SF6 total cross section function, a new weak resonant feature close to 25 eV has been noticed in the present experiment, in accordance with earlier theoretical calculations.     

Titanocene-catalyzed cascade cyclization of epoxypolyprenes: straightforward synthesis of terpenoids by free-radical chemistry

The titanocene-catalyzed cascade cyclization of epoxypolyenes, which are easily prepared from commercially available polyprenoids, has proven to be a useful procedure for the synthesis of C(10), C(15), C(20), and C(30) terpenoids, including monocyclic, bicyclic, and tricyclic natural products. Both theoretical and experimental evidence suggests that this cyclization takes place in a nonconcerted fashion via discrete carbon-centered radicals. Nevertheless, the termination step of the process seems to be subjected to a kind of water-dependent control, which is unusual in free-radical chemistry. The catalytic cycle is based on the use of the novel combination Me(3)SiCl/2,4,6-collidine to regenerate the titanocene catalyst. In practice this procedure has several advantages: it takes place at room temperature under mild conditions compatible with different functional groups, uses inexpensive reagents, and its end step can easily be controlled to give exocyclic double bonds by simply excluding water from the medium.     

Acid-catalysed formation of tricyclic N,S-acetals in imidazolinone series based on the use of the unprecedented N-acyliminium ion cascade reaction involving transposition, heterocyclisation and pi-cyclisation

4-Hydroxy-5,5-dimethylimidazolines tethered at N-1 to an aryl sulfide undergo an unprecedented acid-catalysed domino reaction, involving double methyl transposition, heterocyclisation, isomerisation of thiazetidinium ion and, finally, pi-cyclisation. In this way a one-pot synthesis of original tricyclic N,S-acetals was developed. The same triheterocyclic products can be prepared also starting from the corresponding 5-hydroxy isomers (in this case the cascade of reactions does not involve methyl transposition).     

On the biological importance of the hydrogen bond breaking potency of fluorocarbons

Fluorocarbons containing higher halogens have the potency of breaking certain hydrogen bonds in solutions. The relative strength of this potency varies in the series F < Cl < Br < I and the presence of hydrogen atoms in the fluorocarbon increases it. There is a striking parallelism between the hydrogen bond breaking and the anaesthetic potency of these molecules. It is suggested that the breaking of hydrogen bonds is an important step in the mechanism of anaesthesia.     

Morphology and oxygen sensor response of luminescent Ir-labeled poly(dimethylsiloxane)/polystyrene polymer blend films

Polymer films consisting of a linear poly(dimethylsiloxane) end-functionalized with a luminescent Ir(III) complex (Ir-PDMS), blended with polystyrene (PS), function as optical oxygen sensors. The sensor response arises by quenching of the luminescence from the Ir(III) chromophore by oxygen that permeates into the polymer film. The morphology and luminescence oxygen sensor properties of blend films consisting of Ir-PDMS and PS have been characterized by fluorescence microscopy, atomic force microscopy, and scanning electron microscopy. The investigations demonstrate that microscale phase segregation occurs in the films. In blends that contain a relatively small amount of Ir-PDMS in PS (ca. 10 wt %), the Ir-PDMS exists as circular domains, with diameters ranging from 2 to 5 mum, surrounded by the majority PS phase. For larger weight fractions of Ir-PDMS in the blends, the film morphology becomes bicontinuous. A novel epifluorescence microscopy method is applied that allows the construction of Stern-Volmer quenching images that quantify the oxygen sensor response of the blend films with micrometer spatial resolution. These images provide a map of the oxygen permeability of the polymer blend films with a spatial resolution of ca. 1 mum. The results of this investigation show that the micrometer-sized Ir-PMDS domains display a 2-3-fold higher oxygen sensor response compared to the surrounding PS matrix. This result is consistent with the fact that PDMS is considerably more gas permeable compared to PS. The relationship of the microscale morphology of the blends to their performance as macroscale optical oxygen sensors is discussed.     

Theory of the photodissociation of ozone in the Hartley continuum: potential energy surfaces, conical intersections, and photodissociation dynamics

Ab initio potential energy and transition dipole moment surfaces are presented for the five lowest singlet even symmetry electronic states of ozone. The surfaces are calculated using the complete active space self consistent field method followed by contracted multireference configuration interaction (MRCI) calculations. A slightly reduced augmented correlation consistent valence triple-zeta orbital basis set is used. The ground and excited state energies of the molecule have been computed at 9282 separate nuclear geometries. Cuts through the potential energy surfaces, which pass through the geometry of the minimum of the ground electronic state, show several closely avoided crossings. Close examination, and higher level calculations, very strongly suggests that some of these seemingly avoided crossings are in fact associated with non-symmetry related conical intersections. Diabatic potential energy and transition dipole moment surfaces are created from the computed ab initio adiabatic MRCI energies and transition dipole moments. The transition dipole moment connecting the ground electronic state to the diabatic B state surface is by far the strongest. Vibrational-rotational wavefunctions and energies are computed using the ground electronic state. The energy level separations compare well with experimentally determined values. The ground vibrational state wavefunction is then used, together with the diabatic B<--X transition dipole moment surface, to form an initial wavepacket. The analysis of the time-dependent quantum dynamics of this wavepacket provides the total and partial photodissociation cross sections for the system. Both the total absorption cross section and the predicted product quantum state distributions compare well with experimental observations. A discussion is also given as to how the observed alternation in product diatom rotational state populations might be explained.     

RAMPED-UP NMR: multiplexed NMR-based screening for drug discovery

The crucial step in drug discovery is the identification of a lead compound from a vast chemical library by any number of screening techniques. NMR-based screening has the advantage of directly detecting binding of a compound to the target. The spectra resulting from these screens can also be very complex and difficult to analyze, making this an inefficient process. We present here a method, RAMPED-UP NMR, (Rapid Analysis and Multiplexing of Experimentally Discriminated Uniquely Labeled Proteins using NMR) which generates simple spectra which are easy to interpret and allows several proteins to be screened simultaneously. In this method, the proteins to be screened are uniquely labeled with one amino acid type. There are several benefits derived from this unique labeling strategy: the spectra are greatly simplified, resonances that are most likely to be affected by binding are the only ones observed, and peaks that yield little or no information upon binding are eliminated, allowing the analysis of multiple proteins easily and simultaneously. We demonstrate the ability of three different proteins to be analyzed simultaneously for binding to two different ligands. This method will have significant impact in the use of NMR spectroscopy for both the lead generation and lead optimization phases of drug discovery by its ability to increase screening throughput and the ability to examine selectivity. To the best of our knowledge, this is the first time in any format that multiple proteins can be screened in one tube.     

PEO／EVA共混物的结构研究

ＰＥＯ以分散相形式存在于ＰＥＯ／ＥＶＡ共混物中，且具有部分相容性。Ｘ－射线衍射谱表明ＥＶＡ含有较强的ＰＥ衍射峰；ＰＥＯ／ＥＶＡ共混物既表现出ＰＥ的衍射峰也含有ＰＥＯ的晶面反射。随着ＰＥＯ的Ｍｎ的增加，ＰＥＯ／ＥＶＡ的Ｗｃ、ｘ增大且于时获得最大值：ＰＥ０／ＥＶＡ的Ｗｃ、ｘ值比纯ＰＥＯ的Ｗｃ、ｘ明显降低。